1.Welding materials
In
Welding, substances called filler materials or consumables are used. As the
name implies, these substances provide filler or a body of molten materials
that provides a strong bond to be formed between the base metals used. Most
welding processes will also require some form of shielding to protect both the
main components and filler from being oxidized during the process.
The
type of welding materials used during welding depends on the nature of the job
intended. Electrodes draw the necessary energy in order to perform welding
applications. Luoyang Golden Egret Company has any kind of welding materials
include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod,
Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.
Welding
can be applied in different kinds of industries such as building and
construction, oil and gas, marine, power generation, steel, mine tools,
automobile, transportation and etc.
2. Welding rod
1)Cast tungsten carbide based tubular
rod
The
hard phase of the rod is cast tungsten carbide which leads to higher hardness
and better wear-resistance.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65
Mainly
used for Mining machinery, Geological tools, Petroleum drilling tools etc, by
Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GT1103
(CTC, 60-80 mesh),
GT1103-1(CTC, 20-30 um),
GT1103-2(CTC,
40-60 um)
2)The hard phase of tube rod is carbide
pellets which leads to higher impact resistance and better wear resistance than
CTC cloase rod.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65 wear test.
Mainly
used for mining machinery. Geological tools etc; by Oxy-acetylene with weak
carburizing flame.
Product recommendation:
GT2102 (Cemented carbide grit, 30-60mesh)
GT2102-2(Cemented carbide grit, 30-40mesh)
GT2102-3(Cemented carbide grit, 40-60mesh)
3)Tube rod is composited by Cemented carbide
pellets, Spherical CTC and CTC. The layer has higher impact resistance, better
wear resistance and good fluidity than other rods.
Wear resistance: the wear resistance is 6-7
times better than others. Tested by ASTM G65.
Mainly used for oil method drill bits, such as
Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT3302 (carbide pellets, 20-40mesh)
GT3302-1(carbide pellets, 14-40um)
4)The hard phase of the rod is monocrystal WC,
the welding layer has a higher wear resistance and better impact resistance.
The wear resistance is 6-7 times better than
others, tested by ASTM G65 method.
Mainly used for the repair and strength for oil
drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT4104 (Monocrystal WC, 80-200mesh)
3. Welding Rope
Made
form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The
CTC is in spherical or irregular with good wear resistance; the nickel alloy is
in spherical or nearly spherical shape with good wettability and erosion
resistance and better corrosion resistance than tubular rod.
Recommend
to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice,
Coal drill pipe, Tunnel drilling machinery etc.
By
Oxy-Acetylene Welding with weak carburizing flame.
Product
recommendation:
GS110450N
(CTC, 4mm, HRC 47-55)
GS110550N
(CTC, 5mm, HRC 47-55)
GS110650N
(CTC, 6mm, HRC 47-55)
4. Welding Bar
The
rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is
in irregular or spherical shape with better wear resistance and the nickel
alloy is in spherical or nearly spherical shape and has good wettability with cast
tungsten carbide. The cladding layer has a higher impact resistance and better
wear resistance.
Its
wear resistance and corrosion resistance is between tube rod and flexible rope.
Mainly
used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner
drill stem and Mechanical parts of Tunnel rock drill machine etc.
Welded
by Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GD4025253-3(CTC, SCTC, 4*600/6*600)
GD4030303-3(CTC,
SCTC, 4*600/6*600)
5. Welding wire
Intensified molybdenum titanium vanadium
composite chromium carbide welding wire can improve layer`s bonding strength
and tenacity. This wire can use for multilayer welding which has no peel off,
and it can maintain good wear resistance under certain impact working condition.
Product recommendation:GSQD671Mo-4(1.6mm)
Medium carbon and high chromium wear resistance welding wire has a higher
hardness, stronger wear resistance, and excellent toughness by adding a certain
amount of molybdenum alloys and boride. It has a better impact resistance and
strip resistance than high chromium cast iron type materials
Product recommendation: GSQD621Mo-4(1.6mm)
With
high sphericity & excellent alloy organization, cemented carbide pellet is
mainly used in welding, as an adding material of PTA Powder , tubular welding
rod, to improve the wear resistance of the workpieces greatly.
Product recommendation: GQ06
Cemented
carbide grit with different percent of cobalt has good abrasive resistance and
is widely used for making grinding, polishing and cutting tools.
Product
recommendation: GS08A
Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com
smart led bar light Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. Slim-Size Straight Single-Row designed
5. Long/short side-mounting brackets for option
The Specification of 5D LED Light Bar:
ITEM
DESCRIPTION
Model Number
TH-GT05100C
Power Output
100 Watts
Operating Voltage
DC9~60V
LEDÂ Chip
20pcs*5W CREE
Lumens
7200lm
Color Temperature:Â
6000K
Waterproof rating
IP68
Optional Beam PatternÂ
Spot/flood/Combo
Housing Material
Diecast aluminum housing
Mounting Bracket
alum alloy bracket
Optional Bracket
Long/short side-mounting brackets
Len Materia
polycarboante lens
Housing item
Slim-Size Straight Single-Row designed
Length Size
21"/53.6cm
Life Span
Above 30,000 hoursÂ
Wire Length
60cm
Warranty
12Â months
led slim light bar Qualifications:
Slim LED Light Bar for offroad G Series Size:
Model
Length Size
Power
LED Type
LED Quantity
Lumens
Beam
TH-GT0530C
8"/19.3cm
30W
5W Cree
6pcs
2160lm
Spot/Flood
TH-GT0550C
12"/29.3cm
50W
5W Cree
10pcs
3600lm
Spot/Flood/Combo
TH-GT0560C
14"/34.8cm
60W
5W Cree
12pcs
4320lm
Spot/Flood/Combo
TH-GT05100C
21"/53.6cm
100W
5W Cree
20pcs
7200lm
Spot/Flood/Combo
TH-GT05120C
25"/64.5cm
120W
5W Cree
24pcs
8640lm
Spot/Flood/Combo
TH-GT05150C
31"/79.4cm
150W
5W Cree
30pcs
10800lm
Spot/Flood/Combo
TH-GT05200C
41"/104.8cm
200W
5W Cree
40pcs
14400lm
Spot/Flood/Combo
TH-GT05250C
51"/130.2cm
250W
5W Cree
50pcs
18000lm
Spot/Flood/Combo
Led Lightbars Detail Image:
5w led spotlight Application:
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of Straight LED Light Bar, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
 
Production Facilities:
Name
No.
Name
No.
(Fuji, Panasonic, Casio) SMT machines
4
pressure testers
3
hot air-reflow systems
2
UV-VIS-Near IR Spectro photo colorimeter  Â
2
wire peeling machines
4
LCR Digital Electric Bridges
3
laser carving machines
2
Oscilloscopes
5
automatic wire peeling machines
2
integrating sphere
1
Size and Package smart led bar light:
Name
piece
G.W
Size
One piece
1pcs
2.03kgs
23*20*11CM
One carton
6pcs/ctn
12.18kgs
64*41*21CM
Shipping for 5D LED Light Bar:
Sample order
Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order
Shipping by sea about 7-15days
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing Â
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month. Â Â
3.Powerful production strength: we can produce 15,000pcs led slim light bar & 90,000pcs Rohs Ce LED Work Lights each month.  Â
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.  Â
 A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30  advanced producing & testing facilities Â
 Â
FAQ:
Q: What's your Slim LED Light Bar for offroad after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Â
Q: Do you accept ODM&OEM Led Lightbars orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
Â
Q: How to work with you on ODM&OEM 5w led spotlight orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
   Â
Q: What's the Straight LED Light Bar MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Â
Q: How long is smart led bar light lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
Â
Q: How to place 5D LED Light Bar orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
Â
5W CREE Chip LED Light Bars 100W LED Light Bar
smart led bar light Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. Slim-Size Straight Single-Row designed
5. Long/short side-mounting brackets for option
The Specification of 5D LED Light Bar:
ITEM
DESCRIPTION
Model Number
TH-GT05100C
Power Output
100 Watts
Operating Voltage
DC9~60V
LEDÂ Chip
20pcs*5W CREE
Lumens
7200lm
Color Temperature:Â
6000K
Waterproof rating
IP68
Optional Beam PatternÂ
Spot/flood/Combo
Housing Material
Diecast aluminum housing
Mounting Bracket
alum alloy bracket
Optional Bracket
Long/short side-mounting brackets
Len Materia
polycarboante lens
Housing item
Slim-Size Straight Single-Row designed
Length Size
21"/53.6cm
Life Span
Above 30,000 hoursÂ
Wire Length
60cm
Warranty
12Â months
led slim light bar Qualifications:
Slim LED Light Bar for offroad G Series Size:
Model
Length Size
Power
LED Type
LED Quantity
Lumens
Beam
TH-GT0530C
8"/19.3cm
30W
5W Cree
6pcs
2160lm
Spot/Flood
TH-GT0550C
12"/29.3cm
50W
5W Cree
10pcs
3600lm
Spot/Flood/Combo
TH-GT0560C
14"/34.8cm
60W
5W Cree
12pcs
4320lm
Spot/Flood/Combo
TH-GT05100C
21"/53.6cm
100W
5W Cree
20pcs
7200lm
Spot/Flood/Combo
TH-GT05120C
25"/64.5cm
120W
5W Cree
24pcs
8640lm
Spot/Flood/Combo
TH-GT05150C
31"/79.4cm
150W
5W Cree
30pcs
10800lm
Spot/Flood/Combo
TH-GT05200C
41"/104.8cm
200W
5W Cree
40pcs
14400lm
Spot/Flood/Combo
TH-GT05250C
51"/130.2cm
250W
5W Cree
50pcs
18000lm
Spot/Flood/Combo
Led Lightbars Detail Image:
5w led spotlight Application:
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of Straight LED Light Bar, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
Â
Production Facilities:
Name
No.
Name
No.
(Fuji, Panasonic, Casio) SMT machines
4
pressure testers
3
hot air-reflow systems
2
UV-VIS-Near IR Spectro photo colorimeter  Â
2
wire peeling machines
4
LCR Digital Electric Bridges
3
laser carving machines
2
Oscilloscopes
5
automatic wire peeling machines
2
integrating sphere
1
Size and Package smart led bar light:
Name
piece
G.W
Size
One piece
1pcs
2.03kgs
23*20*11CM
One carton
6pcs/ctn
12.18kgs
64*41*21CM
Shipping for 5D LED Light Bar:
Sample order
Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order
Shipping by sea about 7-15days
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing Â
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month. Â Â
3.Powerful production strength: we can produce 15,000pcs led slim light bar & 90,000pcs Rohs Ce LED Work Lights each month.  Â
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.  Â
 A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30  advanced producing & testing facilities Â
 Â
FAQ:
Q: What's your Slim LED Light Bar for offroad after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Â
Q: Do you accept ODM&OEM Led Lightbars orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
Â
Q: How to work with you on ODM&OEM 5w led spotlight orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
   Â
Q: What's the Straight LED Light Bar MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Â
Q: How long is smart led bar light lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
Â
Q: How to place 5D LED Light Bar orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
Â
Model NO.: TH-GT05100C
Power Output: 100 Watts
LEDs: 20PCS*5W CREE
Lumen: 7200lm
Optional Beam: Spot/Flood/Combo
Optional Bracket: Long/Short Side-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 21"/53.6cm
Trademark: Teehon
Transport Package: One Piece in One Box, Six Boxes in One Carton
Specification: Carton size: 64*41*21cm
Origin: Guangzhou China
HS Code: 8512201000
Model NO.: TH-GT05100C
Power Output: 100 Watts
LEDs: 20PCS*5W CREE
Lumen: 7200lm
Optional Beam: Spot/Flood/Combo
Optional Bracket: Long/Short Side-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 21"/53.6cm
Trademark: Teehon
Transport Package: One Piece in One Box, Six Boxes in One Carton
Specification: Carton size: 64*41*21cm
Origin: Guangzhou China
HS Code: 8512201000
5W CREE Chip LED Light Bars 100W LED Light Bar