The use of cars has occupied our lives. When we use them, how do we deal with some unexpected situations? Let Xiao Bian introduce the relevant reason analysis about the car water temperature warning light. First, the water temperature alarm lights There are two possible causes of the water temperature alarm light. The first possibility is that the fan has stopped. At this time, we only need to open the cover of the car to check if the fan is stuck or the plug is off. The second possibility is the thermostat or the pump is wasted. At this time, we can touch down the water pipe and feel whether the water temperature is cold. If the water temperature is cold, it proves that the thermostat or the water pump is wasted, and the coolant cannot be circulated. When it is found that the water temperature warning light is on, we must stop by the parking lot to find out the reason and open the cover to assist in heat dissipation. If necessary, we must call the rescue vehicle and we must not try to launch the car again. Otherwise, the consequences would be unimaginable. Second, the water temperature lights There are also two reasons why the water temperature indicator of the water tank is on, which is divided into leakage of coolant and internal leakage. To judge whether the coolant leaks out, we can check whether there is any leaking liquid in the lower guard plate or the floor under the car, because the coolant is not only difficult to evaporate at normal temperature, but also has color. Therefore, even if the cabin is originally wet, we can judge it. The second case is internal leakage. If there is no external leakage, it is very likely that the cylinder mattress is damaged, causing the coolant to enter the cylinder and the oil passage. Fortunately, these two conditions are not terribly terrible. Adhering to a nearby maintenance facility should not be a problem, but our car must be inevitably overhauled. The above is the analysis of Xiao Bian's alarm related to the car tank lights, hoping to bring some help to the owners. When encountering this kind of situation, they can quickly make correct judgments and reduce the damage of the car as much as possible. To the lowest.
Chlorinated polyethylene is a saturated polymer material with a white powder appearance. It is non-toxic and tasteless. It has excellent weather resistance, ozone resistance, chemical resistance and aging resistance. It has good oil resistance, flame retardancy and coloring properties. It is an excellent impact modifier for PVC plastics and a synthetic rubber with good comprehensive performance. It has a very wide range of applications and has been widely used in cables, wires, hoses, tapes, rubber and plastic products, sealing materials, flame retardant transport belt , Waterproof coiled material, film and various profiles and other products.
As a PVC impact modifier, CPE135A has many advantages such as low price, excellent performance, and excellent aging resistance, but it has certain disadvantages in the use of high impact and high hardness products and low temperature resistant products CPE135A. For example, in the formulation of rigid PVC, a large amount of CPE will reduce the hardness and rigidity, which reduces the physical properties of the product; in addition, when the low temperature resistance requirement of PVC products exceeds minus 30°C, CPE135A cannot meet the requirements. Under normal circumstances, modified CPE, such as ACM, RGC135A, etc., can be selected for rigidity and hardness improvement; for low-temperature resistance modification, impact-resistant ACR or other impact modifiers with lower glass transition temperature can be selected. CPE 135A,Cpe-135a,Cpe 135a Impact Modifier,Impact Modifier Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com
