Plate Heat Exchanger Spare Parts,Plate Heat Exchanger,Plate Spare Part,Plate Type Heat Exchanger Dongguan Runfengda F&M Co., Ltd , https://www.dgrunfengda.com
1, the installation before the road to confirm the performance of our products and media flow arrow is consistent with the movement conditions, and plug the valve cavity clean, does not allow the seals and disc with foreign bodies attached impurities, not clean before never Allow the disc to be closed to avoid damaging the seal. 2, the flange plate supporting the installation of special disc flange recommended, that is HGJ54-91 socket welded steel flange. 3, installed in the pipeline location, the best position for the legislation, but can not flip. 4, the need to regulate the use of traffic, a worm gearbox control. 5, open, close the number of disc valve, in about two months time, open the worm gear box cover, check the butter is normal, should maintain the right amount of butter. 6, check the connection parts require compression, that is, to ensure that the filler bees sex, but also to ensure flexible stem rotation. 7, metal seal butterfly valve products are not suitable for installation at the end of the pipeline, such as must be installed at the end of the pipeline, the need to take the export flange, to prevent the backlog seal, over. 8, the valve stem to install the use of regular inspection of the valve to check the effectiveness of the use, found that the failure to be ruled out in time.