PP Joint For Plastic Infusion Container
The Polypropylene joint for plastic infusion container is made of the imported medicalâ€class polypropylene; where the material complies with FDA rule and passes the USP CLASS VI test. Beneath the joint, itis a shipâ€shape, which will form a plastic liquid infusion bag after welding with nonâ€PVC coâ€extruded film; the top opening is the inlet for loading liquid medicine. After filling the liquid medicine, the top opening will be melted to seal with the composite cap, and then form a complete softâ€bag liquid infusion product. The joint is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, inner packing and so on, are designed and processed as per the cleanliness requirements at the partial level of Class 100 , which passes the GMP onâ€site certification and complies with the cleanliness requirements of high capacity injection medicine.
The surface of production equipment is smooth, flat, and easy to clean and sterilize, with sound corrosionâ€resistant property, and inert to make chemical reaction with packing material. The precision and sensitivity of test and inspection instruments comply with the test and inspection requirements of products.
The polypropylene joint for plastic infusion container is mainly used for the pipe of nonâ€PVC softâ€bag.
PC Cap For Infusion Bag,Plastic Infusion Container PP Joint,PP Joint For Infusion Container,Joint for Plastic Infusion Container YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com
Clevis & Tongue Type End Fitting For Composite InsulatorsÂ
1.Rated Voltage: 0.4KV-750KVÂ
2.Tensile Strength: 2.5KN - 550KNÂ
Clevis & Tongue Type End Fitting For Composite Insulators
Â
•Commodity: end fitting for insulators
•Application: metal Connecting Accessories used for the two ends of Insulator
•Products types: ball&socket, clevis&tongue, socket clevis, socket eye, pin type, post type, cross arm, eye type, flange type and grading ring etc
•Mechanical load: 40kn-550kn
•Voltage range: 0.4KV-750KV
•Material: C45, 35Mn2, 40Mn2, 45Mn2
•Hot dip galvanized coating protection against corrosion
•Production line: precision casting, rolling, forging, machining hot galvanized
•Annual production capacity: 8000 tons
tongue fitting
insulator fitting
metal fitting
Â
Specifications
Clevis & Tongue Type End Fitting For Composite InsulatorsÂ
1.Rated Voltage: 0.4KV-750KVÂ
2.Tensile Strength: 2.5KN - 550KNÂ
Clevis & Tongue Type End Fitting For Composite Insulators
Â
•Commodity: end fitting for insulators
•Application: metal Connecting Accessories used for the two ends of Insulator
•Products types: ball&socket, clevis&tongue, socket clevis, socket eye, pin type, post type, cross arm, eye type, flange type and grading ring etc
•Mechanical load: 40kn-550kn
•Voltage range: 0.4KV-750KV
•Material: C45, 35Mn2, 40Mn2, 45Mn2
•Hot dip galvanized coating protection against corrosion
•Production line: precision casting, rolling, forging, machining hot galvanized
•Annual production capacity: 8000 tons
tongue fitting
insulator fitting
metal fitting
Â
Model NO.: insulator
Trademark: HAIVOL
Specification: 111
Origin: China
HS Code: 3917310000
Model NO.: insulator
Trademark: HAIVOL
Specification: 111
Origin: China
HS Code: 3917310000
Specifications