Silica Matting Agent For Wood Coatings
Description
1, Silica
Matting Agent generally used for PU/NC wood coating, unsaturated polyester wood coatings. It is synthetic amorphous
micronized precipitated silica appearing as white powder and for both
solvent-based and water-based system. Advanced matting efficiency is achieved
by using silica with high pore volume and by fine control of the particle size
and particle size distribution. It provides a superior matting and flatting,
excellent coating appearance and transparency, cost efficient, effective
anti-settling agent and easy dispersion, smooth, abrasion resistant ï¬lms
of high surface quality. Silica Matting Agent reduce the gloss of a
variety of products including coatings, paints, inks, lacquers, varnishes,
while providing lower viscosity and better flow capability.
2, Silica
Matting Agent reduce the gloss of a variety of products including coatings,
paints, inks, lacquers, varnishes, while providing lower viscosity and better flow
capability. A broad array of non-treated and wax-treated products,
covering high-purity silica content, high pore volume and by fine control of
the particle size and particle size distribution. Careful design and control of
silica physical properties ensure dispersion stability, hand-feel,
anti-setting behavior and scratch resistance in solvent-borne and water-borne
system.
Characters
1, Highest matting
efficiency: High pore volume reach to
1.8-2.0 ml/g, and fine control of the particle size and particle size
distribution.
2, Outstanding
anti-settling properties: The products which with wax surface treatment help
prevent settling and improve re-dispersion.
3, Surface
smoothness and improvement in scratch resistance: These silicas have minimal
effect on the physical properties, allowing development of smooth films with
excellent hand-feel, scratch resistance and stain resistance.
4, Excellent
transparency: High purity of silica product ensures that refractive index can
inosculate with resin index.
Applications
1, Clear and
pigmented woodcare applications, such as NC wood coatings, PU wood coatings,
unsaturated polyester wood coatings.
2, Plastic Coating
used as self-phone, laptop, car, Motor-bike, toy and the can.
3, Printing Inks, Gravure Printing Ink, Offset Printing
Ink, Screen Printing Ink, Printing Packing Material.
4, Industrial
Coating, Metal baking Coating, Decorative Coating
5, Plastic
Coating, 3C Coating.
Advantage
1, We will continue to invest in research and
development, application technology and production capacities in emerging
markets. We had set up a research and development center to study new silica
products to use special application.
2, We located in a modern city, as a research,
development and production for chemical raw materials, as well as one of the
largest production bases of silica in China.
3,We are the
leading raw material and technical solution provider to the Paint/Coating/Ink
chemical Industry. We focus on Paint/Coating Market about 25 Years, with
advanced technology and good experience to develop different kinds of silica
matting agent used for different application, such as Wood and
furniture Coating, Industrial Coating, Coil Coating, automotive coatings and
plastic coatings as well as printing inks, leather coating, textile coating
and decorative coatings.
Silica Matting Agent For Wood Coatings ,Paint Silica Matting Agent,Precipitated Silica Matt Powder,Aerogel Matting Agent Guangzhou Quanxu Technology Co Ltd , https://www.anticorrosionpigment.com
These two new products complement DuPont's original Z Technology patented technology for plastic masterbatch manufacturers and extruded sheet producers, as well as celebrating the 50th anniversary of the commercialization of Viton fluoroelastomers. The commercialization of Viton laid a solid foundation for the subsequent development of the fluoroelastomer industry. In addition, DuPont will also exhibit Hypalon chlorosulfonated polyethylene synthetic rubber, Neoprene polychloroprene rubber and Vertex sealing process.
It is reported that the new processing aids are more excellent than the original Z110 and Z210 products. It helps to eliminate melt fracture in the blown film, reduces extrusion pressure, reduces energy consumption and mechanical wear, and reduces die fouling in the extruder. At the 2007 K show, DuPont will highlight the latest fluoroelastomer product lines, such as new products that meet the (US) FDA standards, and research advances in the application of fluoroelastomers to plastics.
DuPont Performance Elastomers' two new polyolefin processing aids Viton FreeFlow Z110 and Z210 will be held at the 17th German Düsseldorf International Plastics and Rubber Exhibition in October 24-31 Exhibition) debut.