The Introduction of PCD PCD/PCBN,Drilling PDC,PDC for Drill Bit,PDC for Bolting Bits Henan Huanghe Whirlwind International Co., Ltd. , https://www.huangheindustry.com
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
The PCD (Polycrystalline diamond) is a composite material, consisting of sintered diamond particles with a metallic binder. Diamond is the hardest material in absolute terms and therefore also the most resistant to abrasion. Used as a cutting tool, it has a good wear resistance, and a yield superior to traditional sharp carbide. The machined surface roughness with the PCD can reach comparable to the adjustment.
Main applications
â–²Processing of non-ferrous
â–²Aluminum alloys with high or low silicon content (pistons, engine blocks engine, wheels, carburetors, connecting rods, gear boxes, cylinders for brakes, etc.).
â–²Bronze and copper alloys (copper manifolds, engine bearings, bushings, connecting rods eyes, locations pumps etc.).
â–²Tungsten carbide (trafilatori rollers and other components sintered etc).
â–²Pieces composed of aluminum and lead, aluminum engine blocks with cast iron pipes reported
â–²Processing of non-metallic materials
â–²Very abrasive materials, such as ceramics industrial uncooked.
â–²Some fired ceramic: zirconia aluminum oxide, such as spark plugs and insulators.
â–²Glass, plastics with glass fibers, carbon fibers.
The Introduction of PCBN
PCBN has the characteristics of high thermal stability, high hardness, high wear resistance and. It`s inert to iron family element, hence PCBN is mainly used for the machining of high hardness and hard processed ferrous materials, such as d facing alloys, harden steel, pearlitic gray cast iron, high temperature alloy, high-speed steel, hard facing alloys, Ni-Cr alloy, powder metallurgy metals.
Model NO.: ROLC
Model NO.: ROLC
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.