Wenzhou Deli Machinery Equipment Co., Ltd. , https://www.sungoodtech.com
Product Description
1. Application
Choke manifold is necessary
Device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well's technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balanced drilling can work under minimum pressure-difference.
2. Configuration
 Â
Â
Â
Â
The choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components. Â 3. Working Principles When the pressure inside the well rises, opening/closing the choke valves (including manual chokes, hydraulic chokes and positive chokes) on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure, which can be directly blown out through the gate valve if the casing pressure is quite high. 4. Pressure Ratings The kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa, 70MPa and 105MPa, and also can be available upon customer request. Â 5. Operating Instructions (1) The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used. (2) The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure. (3) The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough. (4) The pressure gauge must be installed. (5) In winter, the choke manifold can work under a low temperature condition.
Â
Â
Parts List:
Â
Â
Â
Â
Item
Component
Qty
Material
Â
Â
Â
Â
Â
1
Skid Base
1
Â
Â
Â
Â
Â
Â
2
Hydraulic Choke
1
Â
Â
Â
Â
Â
Â
3
Five-way Piece
1
4130
Â
Â
Â
Â
Â
4
Gate Valve
1
Â
Â
Â
Â
Â
Â
5
Pressure Gauge
1
Â
Â
Â
Â
Â
Â
6
Needle Valve
1
Â
Â
Â
Â
Â
Â
7
Instrument Flange
1
4130
Â
Â
Â
Â
Â
8
Gate Valve
10
Â
Â
Â
Â
Â
Â
9
Spacer Spool
2
Â
Â
Â
Â
Â
Â
10
Studded Cross
5
4130
Â
Â
Â
Â
Â
11
Blind Flange
7
4130
Â
Â
Â
Â
Â
12
Spacer Spool
1
Â
Â
Â
Â
Â
Â
13
Gate Valve
2
Â
Â
Â
Â
Â
Â
14
Manual Choke
2
Â
Â
Â
Â
CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16Â Â 10000PSIÂ Â (900pcs)
2-1/16Â Â 15000PSIÂ Â (55pcs)
2-9/16Â Â 10000PSIÂ Â (60pcs)
3-1/16Â Â 10000PSIÂ Â (60pcs)
4-1/16Â Â 10000PSIÂ Â (100pcs)
4-1/16Â Â 15000PSIÂ Â (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1Â
2-1/16Â Â 5000PSIÂ Â (10pcs)
2-1/16Â Â 10000PSIÂ Â (20pcs)
3-1/16Â Â 10000PSIÂ Â (10pcs)
CAMERONÂ FCÂ HYÂ VALVEÂ EE,PSL3,PR1Â Â
2-1/16Â Â 15000PSIÂ Â (30pcs)
3-1/16Â Â 15000PSIÂ Â (20pcs)
Â
CAMERONÂ FLSÂ VALVE,EE,PSL3,PR1
7-1/16Â 10000PSIÂ BALLÂ SCREWÂ FLSÂ VALVEÂ (10pcs)
410SS+supersonic tungsten caribde gates and seats:Â
1-13/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â 450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 400setsÂ
3-1/16"Â 15000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 100sets
4-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 300sets
4-1/16"Â 15000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200sets
5-1/8"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 350sets
7-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 300sets
CAMERONÂ WKMÂ Â
2-1/16"Â Â Â 5000PSIÂ Â Â Â 300SETÂ Â Â Â
3-1/8"    5000PSI    50 sets    Â
4-1/16"   5000psi    50sets  Â
7-1/16"Â Â Â 20sets
CAMERONÂ DEMCOÂ Â Â
2"  5000PSI   40 sets   Â
3"  5000psi   40sets   Â
4"  5000psi   30sets   Â
5"   5000psi   50sets
                    Â
DEMCO  2"    7500PSI     20 sets  Â
3"  7500psi    15sets  Â
4"   7500psi   20  sets   Â
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annularÂ
Double-ram 21 1/4" 3KÂ
annular 13 5/8" 5K
Double-ram 13 5/8" 10KÂ
Single-ram 13 5/8" 10KÂ
Annular-11"Â 10KÂ Â Â Â
D-Ram 11" 15K                  Â
S-ram 11" 15K  Â
Annular-9"Â 10KÂ Â Â Â Â Â
D-Ram 11" 15K                  Â
S-ram 9" 15K  Â
D-Ram 9" 15K    Â
Annular-7"Â 10KÂ Â Â
D-Ram 7" 15K                  Â
S-ram 7 " 15K  Â
Annular - 7 " 5K     Â
D-Ram 7" 10K                  Â
S-ram 7 " 10K  Â
D-Ram 7" 5K                 Â
S-ram 7 " 5K  Â
XQ140-12YA   15pcs Â
XQ140-12YT   6pcs   Â
TQ340/35     7pcs  Â
ZQ127-25YÂ Â Â Â 15pcsÂ
XQ114-6YBÂ Â Â Â 13pcs
XQ89/3YBÂ Â Â Â Â 11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS
As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
Â
Product Description
1. Application
Choke manifold is necessary
Device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well's technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balanced drilling can work under minimum pressure-difference.
2. Configuration
 Â
Â
Â
Â
The choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components. Â 3. Working Principles When the pressure inside the well rises, opening/closing the choke valves (including manual chokes, hydraulic chokes and positive chokes) on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure, which can be directly blown out through the gate valve if the casing pressure is quite high. 4. Pressure Ratings The kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa, 70MPa and 105MPa, and also can be available upon customer request. Â 5. Operating Instructions (1) The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used. (2) The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure. (3) The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough. (4) The pressure gauge must be installed. (5) In winter, the choke manifold can work under a low temperature condition.
Â
Â
Parts List:
Â
Â
Â
Â
Item
Component
Qty
Material
Â
Â
Â
Â
Â
1
Skid Base
1
Â
Â
Â
Â
Â
Â
2
Hydraulic Choke
1
Â
Â
Â
Â
Â
Â
3
Five-way Piece
1
4130
Â
Â
Â
Â
Â
4
Gate Valve
1
Â
Â
Â
Â
Â
Â
5
Pressure Gauge
1
Â
Â
Â
Â
Â
Â
6
Needle Valve
1
Â
Â
Â
Â
Â
Â
7
Instrument Flange
1
4130
Â
Â
Â
Â
Â
8
Gate Valve
10
Â
Â
Â
Â
Â
Â
9
Spacer Spool
2
Â
Â
Â
Â
Â
Â
10
Studded Cross
5
4130
Â
Â
Â
Â
Â
11
Blind Flange
7
4130
Â
Â
Â
Â
Â
12
Spacer Spool
1
Â
Â
Â
Â
Â
Â
13
Gate Valve
2
Â
Â
Â
Â
Â
Â
14
Manual Choke
2
Â
Â
Â
Â
CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16Â Â 10000PSIÂ Â (900pcs)
2-1/16Â Â 15000PSIÂ Â (55pcs)
2-9/16Â Â 10000PSIÂ Â (60pcs)
3-1/16Â Â 10000PSIÂ Â (60pcs)
4-1/16Â Â 10000PSIÂ Â (100pcs)
4-1/16Â Â 15000PSIÂ Â (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1Â
2-1/16Â Â 5000PSIÂ Â (10pcs)
2-1/16Â Â 10000PSIÂ Â (20pcs)
3-1/16Â Â 10000PSIÂ Â (10pcs)
CAMERONÂ FCÂ HYÂ VALVEÂ EE,PSL3,PR1Â Â
2-1/16Â Â 15000PSIÂ Â (30pcs)
3-1/16Â Â 15000PSIÂ Â (20pcs)
Â
CAMERONÂ FLSÂ VALVE,EE,PSL3,PR1
7-1/16Â 10000PSIÂ BALLÂ SCREWÂ FLSÂ VALVEÂ (10pcs)
410SS+supersonic tungsten caribde gates and seats:Â
1-13/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â 450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 400setsÂ
3-1/16"Â 15000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 100sets
4-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 300sets
4-1/16"Â 15000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200sets
5-1/8"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 350sets
7-1/16"Â 10000PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 300sets
CAMERONÂ WKMÂ Â
2-1/16"Â Â Â 5000PSIÂ Â Â Â 300SETÂ Â Â Â
3-1/8"    5000PSI    50 sets    Â
4-1/16"   5000psi    50sets  Â
7-1/16"Â Â Â 20sets
CAMERONÂ DEMCOÂ Â Â
2"  5000PSI   40 sets   Â
3"  5000psi   40sets   Â
4"  5000psi   30sets   Â
5"   5000psi   50sets
                    Â
DEMCO  2"    7500PSI     20 sets  Â
3"  7500psi    15sets  Â
4"   7500psi   20  sets   Â
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annularÂ
Double-ram 21 1/4" 3KÂ
annular 13 5/8" 5K
Double-ram 13 5/8" 10KÂ
Single-ram 13 5/8" 10KÂ
Annular-11"Â 10KÂ Â Â Â
D-Ram 11" 15K                  Â
S-ram 11" 15K  Â
Annular-9"Â 10KÂ Â Â Â Â Â
D-Ram 11" 15K                  Â
S-ram 9" 15K  Â
D-Ram 9" 15K    Â
Annular-7"Â 10KÂ Â Â
D-Ram 7" 15K                  Â
S-ram 7 " 15K  Â
Annular - 7 " 5K     Â
D-Ram 7" 10K                  Â
S-ram 7 " 10K  Â
D-Ram 7" 5K                 Â
S-ram 7 " 5K  Â
XQ140-12YA   15pcs Â
XQ140-12YT   6pcs   Â
TQ340/35     7pcs  Â
ZQ127-25YÂ Â Â Â 15pcsÂ
XQ114-6YBÂ Â Â Â 13pcs
XQ89/3YBÂ Â Â Â Â 11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS
As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
Â
Model NO.: Y-Choke Manifold
Trademark: YOUYAO
Origin: China
HS Code: 84314310
Model NO.: Y-Choke Manifold
Trademark: YOUYAO
Origin: China
HS Code: 84314310