Industrial Pulse Bag Type Dust Vacuum Cleaner for Gas Filtration

Introduction   

PPC gas tank pulse bag filter is using separate dust cleaning in every chamber by isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller. So it can ensure the compressed air soot cleaning effect. Air tank pulse bag filter has the filter bag number in 32, 64, 96, 128 bags per room. 

PPC air tank pulse bag filter is to meet more customer needs deal the large quantity, high concentration of dust powder. On the basis of the type FPPC filter, the PPC one increasing soot cleaning strength, improve the efficiency of dust removal.  At the same time, it expand the application range of bag filter. The filter is mainly used for crusher, dryer, coal mill, raw meal grinding, cement mill dust removal equipment, building materials industry such as packaging machine, also it can be used as metallurgy, machinery, chemical industry, papermaking industry and other industrial and mining enterprises of dust collection and dust collecting.


Five Technology Comprehensive Upgrade:

1. Gas wind inlet and outlet more uniform distribution
Expand the filter body up and down volume to reduce the resistance, the structure of bag filter makes the flow more smoothly, gently and evenly. Increase the working life of filter bag media. 

2. Soot cleaning more thoroughly
Adopting international advanced offline three soot cleaning way (filtration, dust, static), avoid dust "adsorption" again.

3. Design more flexible
It can increase the settling chamber design according to the working condition of demand. More extend the service life of filter bag, dust concentration can as high as 1000 g/Nm3.

4. More convenient to control
The PLC program controller, or smart controller instrument control the blowing, slag discharge, ect.  In the same time, it can adjust by timing or by manually. The most guarantees the ash removal effect. 

Timing: set a time program, automatically clear dust room by room
Manual instructions: adopt the automatic control in normal working conditions. When a single room failure, it can random manual control switch.

5. More lower cost
Chamber blowing ash removal: a pulse valve can blow one room (the amount of filter bag 32, 64, 96pcs per room). Compared with ordinary filter injection, it decrease the number of pulse valve 6 to 20 times.


Working principle



 

Under the action of the main power fan, the dust gas enter into the dust subside chamber through air inlet. Dust gas is blocked flow board touch attack the airflow into the hopper. At the same time, air speed is slows down. Under the inertia and weight, the coarser particles directly into the dust discharger. Other light fine dust with air adsorb on the filter bag surface, the filtered clean gas through the filter bag into the box body and outlet.

 

The PPC filter main body is separated into several air tank. There is a cylinder on each side outlet piping for lift valve. When the bag filter work after one cycle, the ash removal controller gives the signal, the first recess lift valve closed to cut off the flow of gas, enclosure of pulse valve open, with more than 0.4 Mpa compressed air into the net gas chamber, clear dust on the filter bag; When this action is completed, the lift valve to open, the chamber begin to work again, and one by one according to the above procedure complete soot cleaning action.




Our commitment

1. The dust collector design according to the specific condition of dust removal technology. The wind network project design for all system.

2. The bag filter equipment over 20 years working life.

3. Associated with equipment spare parts, ensure the replacement parts within 20 years.

4. If accessories stop production or update, to ensure that the replacement parts can be normal use, and keep noticed one year before the spare parts stop production.

 

Our services

1. Enquiries quickly reply within 24 hours.

2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours.If any problem, We will arrange professional engineers within 48 working hours to solve it.

3.We have  good faith principle.we will sure the products is high quality before shippment.

 

Introduction   

PPC gas tank pulse bag filter is using separate dust cleaning in every chamber by isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller. So it can ensure the compressed air soot cleaning effect. Air tank pulse bag filter has the filter bag number in 32, 64, 96, 128 bags per room. 

PPC air tank pulse bag filter is to meet more customer needs deal the large quantity, high concentration of dust powder. On the basis of the type FPPC filter, the PPC one increasing soot cleaning strength, improve the efficiency of dust removal.  At the same time, it expand the application range of bag filter. The filter is mainly used for crusher, dryer, coal mill, raw meal grinding, cement mill dust removal equipment, building materials industry such as packaging machine, also it can be used as metallurgy, machinery, chemical industry, papermaking industry and other industrial and mining enterprises of dust collection and dust collecting.


Five Technology Comprehensive Upgrade:

1. Gas wind inlet and outlet more uniform distribution
Expand the filter body up and down volume to reduce the resistance, the structure of bag filter makes the flow more smoothly, gently and evenly. Increase the working life of filter bag media. 

2. Soot cleaning more thoroughly
Adopting international advanced offline three soot cleaning way (filtration, dust, static), avoid dust "adsorption" again.

3. Design more flexible
It can increase the settling chamber design according to the working condition of demand. More extend the service life of filter bag, dust concentration can as high as 1000 g/Nm3.

4. More convenient to control
The PLC program controller, or smart controller instrument control the blowing, slag discharge, ect.  In the same time, it can adjust by timing or by manually. The most guarantees the ash removal effect. 

Timing: set a time program, automatically clear dust room by room
Manual instructions: adopt the automatic control in normal working conditions. When a single room failure, it can random manual control switch.

5. More lower cost
Chamber blowing ash removal: a pulse valve can blow one room (the amount of filter bag 32, 64, 96pcs per room). Compared with ordinary filter injection, it decrease the number of pulse valve 6 to 20 times.


Working principle



 

Under the action of the main power fan, the dust gas enter into the dust subside chamber through air inlet. Dust gas is blocked flow board touch attack the airflow into the hopper. At the same time, air speed is slows down. Under the inertia and weight, the coarser particles directly into the dust discharger. Other light fine dust with air adsorb on the filter bag surface, the filtered clean gas through the filter bag into the box body and outlet.

 

The PPC filter main body is separated into several air tank. There is a cylinder on each side outlet piping for lift valve. When the bag filter work after one cycle, the ash removal controller gives the signal, the first recess lift valve closed to cut off the flow of gas, enclosure of pulse valve open, with more than 0.4 Mpa compressed air into the net gas chamber, clear dust on the filter bag; When this action is completed, the lift valve to open, the chamber begin to work again, and one by one according to the above procedure complete soot cleaning action.




Our commitment

1. The dust collector design according to the specific condition of dust removal technology. The wind network project design for all system.

2. The bag filter equipment over 20 years working life.

3. Associated with equipment spare parts, ensure the replacement parts within 20 years.

4. If accessories stop production or update, to ensure that the replacement parts can be normal use, and keep noticed one year before the spare parts stop production.

 

Our services

1. Enquiries quickly reply within 24 hours.

2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours.If any problem, We will arrange professional engineers within 48 working hours to solve it.

3.We have  good faith principle.we will sure the products is high quality before shippment.

 

Welding Wires/Welding Material

Welding wires continuous Aluminum Welding Wire and Stainless Steel Welding Wire. It can be used for Tig and Mig welding. The wire is used as a filler metal or as a conductive wire for welding. In the gas welding and tungsten gas protection arc welding, the wire used as a filler metal; in submerged arc welding, electroslag welding and other melting gas protection arc welding, the welding wire is both filled with metal, but also conductive electrodes. The surface of the wire is not coated with an oxidative flux. Welding wires' physical and chemical properties of stability, welding alloy wires can be widely used in ships,marine engineering, petrochemical,boilers, pressure vessels, electric power,vehicles and many other welding industries.

Welding Wires,Carbon Steel Wire,Aluminum Alloy Welding Wire,TIG Straight Welding Wire

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com