Home Lift With Enclosure passenger elevator is an intelligent and automatic equipment controlled by a microcomputer. It does not require special personnel to operate and drive. Ordinary passengers can only take and operate the elevator according to the following procedures. House Lift,House Elevator,Villa Elevator,Hydraulic Home Lift,Hydraulic Elevator,Hydraulic Home Elevator zhongcan machinery Co.,Ltd , https://www.zclift.com
1. At the entrance of the elevator on the elevator floor, press the up or down arrow button according to your own needs. As long as the light on the button is on, it means that your call has been recorded. Just wait for the arrival of the elevator.
2. After the elevator arrives at the door, let the personnel in the car out of the elevator first, and then the caller enters the elevator car. After entering the car, press the corresponding digital button on the control panel in the car according to the floor you need to reach. Similarly, as long as the button light is on, it means that your layer selection has been recorded; At this time, you don't need to do anything else, just wait for the elevator to stop at your destination floor.
3. The elevator will automatically open the door when it reaches your destination floor. At this time, you will exit the elevator in order to end the process of taking the elevator
Flat panel lights are playing an increasingly important role. Flat panel lamps are also called LED panel lamps. They are a type of LED lamps. In the current lighting market, panel lamps have become a favorite lighting fixture, in the form of dark horses. The global lighting market has received attention. At present, the development of the LED lighting market is booming, which has promoted the rapid development of lighting fixtures such as flat panels. This is mainly because the country pays more and more attention to energy conservation and emission reduction, and has introduced relevant policies to support the development of energy-saving industries. Lighting fixtures such as flat lamps have good applications in office and home lighting. According to the survey, LED lighting can save at least 75 indoor lighting, so LED lighting has become the first choice for businesses and users. In the next 10 years, lighting fixtures such as flat panel lights are expected to increase brightness by a factor of 20, while the cost will be reduced to 1/10. At the same time, industry experts expect LED lights to be globally accelerated with the elimination of incandescent lamps. The investment market will usher in a positive trend. It is estimated that the output value of China's LED lighting will reach 500 billion yuan in 2015, accounting for more than 30 of the mainland general lighting market. Flat panel lamps have a higher luminous efficiency ratio. When a traditional incandescent lamp is working, 80-90 energy is converted into heat, and only about 10 energy is converted into light energy. When the panel light is in operation, the LED electro-optical conversion efficiency is 30 to 50, which is three to five times that of the conventional incandescent lamp. That is to say, to achieve the same brightness effect, the panel lamp can save more than 60 energy than the traditional incandescent lamp. In terms of brightness, LEDs and incandescent lamps have higher brightness when the energy consumption is the same. In addition to energy saving, this new type of lighting source is also more environmentally friendly. A waste traditional energy-saving lamp, with an average mercury content of about 0.5 mg, is enough to contaminate 180 tons of water and the surrounding soil, but flat-panel lamps have no such problems. In addition, LED panel lights also have the characteristics of long life, high cost performance, convenient transportation and installation. With these advantages, flat panel lights have become the main force of urban landscape lighting, and at the same time, they will be more and more integrated into the lives of ordinary people. The outlook is good.