On the basis of international cutting edge brush making technology and our own patented inventions, Haixing brush machines are stable and reliable and have been well accepted by the markets. By selecting different clamps and platforms, each Haixing Brush Machine can produce different types of brushes. Roller brush is one of the end products. These machines can produce roller brushes needed by food machinery and other industrial equipment. They have the functions of drilling holes and tufting filaments. Roller Brush Making Machine, Roller Brush Machine, Rolling Brush Machine Yangzhou Haixing CNC Brush Machine Co., Ltd. , https://www.brushmachine.nl
  Elastic Bandage,Band,Belt,Webbing,Tape Microcomputer Belt Cutting Machine
Main Technical Parameter:
ModelDPÂ -160
Voltage
220V
Power
1/2HP
N.W.
83kg
G.W.
133kg
Cutting Length
0.1~9999.9mm
Cutting Width
1~160mm
Measurement
550x550x1000mm
Application:
Sizing cutting for heat shrinking tube, flat cable, PVC sleeve, insulation paper, two-sided tape, Velcro, cotton yarn belt, zipper, etc...
Features:
This cutting machine employs microcomputer controller to set belt cutting length. This machine is ergonomically designed. Operation is easy.
Main functions of belt cutting machine:
Feed material and return material by pressing the button on touch screen
Preset total cutting quantity
Preset cutting length
Preset cutting speed
Preset cut quantity each time ( applied for hot cutting)
Flash cutting quantity finished
Return to ZERO
After-service:
1. Warranty for machines is 12 months
2. A promptly reply within 24 hours
3. Free usage training before delivering machines in factory Â
Knife installation
Â
1,Clear the knife set and the relative interface by clean cotton cloth or gauze cloth
2,Assemble down cold knife on machine, make sure the blade of down cold knife
  and connection board parallel , then tighten 3 fix screws of down cold knife
3,In order to install up cold knife,Please adjust the knife position to top position by manual, then install up cold knife , Don't tighten the fix screws of up cold knife
 4,Please adjust planker to the lowest position by manual method, then tighten the fix
    screws of up cold knife, firstly tighten middle screw, then tighten two sides screws        Â
5,By manual adjustment knife, make sure the blades of up cold knife and down cold knife expand slowly, repeat the action several times.(In order to avoid and grand the burr of blade), then adjust the planker to the top position
 
Â
Model NO.: DP-160
Automatic Grade: Automatic
Condition: New
Cutting Method: Can Angle Cutting.Straight Cutting / Tilt Cutting
Cutting Size: 1-160mm Width
Length: Can Et Different Length When Cutting
Cutting Length: Not Limited
Precise: 0.1mm
Drive: Motor
Trademark: DP
Specification: SGS
Origin: Kunshan
HS Code: 844110000
Microcomputer Belt Cutting Machine (DP-160)