Roll Forming Line Building Material Roof Tile Machine

1. Working Flow:

Decoiling--feeding---forming---cutting------finished product
 
2. Parts of Equipment:
 
Decoiler ,roll forming machine, hydraulic cutting,electric system(PLC control system),hydraulic system, stacker.
 

3. Techincal description:

Technical Parameters:
1). Main Motor Power: 5.5kw
2). Hydraulic Station Power:4KW
3). Hydraulic Oil Pump: CB-E310
4). Sprocket: P-25.4
5). Roller Station: 14
6). Yield Strength: 32MPa
7). Diameter of Principal Axis:  95mm(a key way is in the axle so that the roller can be   tight in the axle)
8). Material of Roller: 45#steel hard chrome plating
9). Processing Speed: 8-12m/min
10). Thickness: 0.3-1mm
11). Installation Dimension (L*W*H): 9m*1.6m*1.4m
12). Material of Blade: Cr12
13). Coil Width: 1000/1220/1250mm
14). Cover Width: 1050mm
15). Total Weight:  5.5T
16). Equipment Parts:  forming machine, hydraulic cutter(30mm steel board welded ) hydraulic station, PLC , equipment base(GB360channel steel welded)  and linear transducer .
·
 
4.Picture of our factory

 

5.Our Certificate

 
 
6.Terms

Payment type: 30% T/T prepaid and balance should be paid before loading
Delivery time: 30days after receving advance payment.
Guarantee period: 12months


7.Installation and training:

a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.

b.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things
 
8. After Service
a.One year guarantee for whole machine.
b.24 hours technica support by email or calling.
c. If there is any problem found of the machine, we will repair it for free in one    year.
 

 
9.OEM Services
We can design and manufacture the machine according to the customers' requirement. You can send me the profile drawing and we will design the machine to you.
We provide you the machines not only with best quality
but also best service for you.
By the way,we warmly weclome you to visit our facory! 
 

10.Other Machines

 Single layer roll forming machine,

 Double layer roll forming machine,

 Purlin roll forming machine,

 Glazed tile roll forming machine,

 Highway guardrail roll forming machine,

 Sandwich panel roll forming machine,

 Door frame roll forming machine,

 Ridge cap roll forming machine,

 Floor deck roll forming machine,

 Stud and track roll forming machine and so on.

 
11. Questions: 

1. How many years since you have been in this field? 

Oour company has been producing roll forming machines for almost 20years. 
We have rich experience for manufacturing and designing the machine. 

2. Where is the nearest airport? 

Tianjin or Beijing, both are ok. Tianjin is nearest. 
From Tianjin to Cangzhou, the high speed train, it takes only 30 minutes. 
From Beijing to Cangzhou, it takes only 51 minutes. 
We will go to Cangzhuo railway station to pick you up, if you come to visit 
Our factory. 

3. How about your quality and price? 

Our machine uses the advanced technique, we are leading in this field. 
Most of other roll forming machine factories, their boss are students of 
Our general manager. We always leads first in this field. 
The quality is among the highest. 
But the price is not high, it is low. Because our rich experience help us 
To do the highest quality machine but with lowest cost. Then our price 
Is not high.

 
You can contact me any time.
                         
Niki Wang
 
BOTOU HUIKEYUAN ENGINEERING CONTROL CO.,LTD
Add: Fuzhuang Development Zone Botou City, Hebei, China
Tel: +86 317 3087243
Fax: +86 317 3087243
Cel: +86 15503170268