Sizheng two-way voice intercom terminal as an analog intercom, to achieve network intercom must use (access) already has a network intercom system. Take the network camera (with intercom function) as an example, the following Xiaobian tells you how to implement the intercom in the network monitoring system.
The first set of complete monitoring intercom system must include the following hardware
Sizheng intercom terminal, network camera, back-end storage (with intercom client) is generally the host computer (because the Haikang NVR can not achieve voice intercom with the camera) and supporting power supply.
The overall wiring of the front end is as follows:
Sizheng Talkback Terminal → Network Camera → Switch → Backend

Power the equipment separately, but the wiring is OK
We can log in to the backend
Taking a PC as an example, there are two ways for me to implement intercom
1. Use the browser to open the webcam directly to realize the intercom
2. Install the corresponding client (test is iVMS-4200)
One: Use the browser to implement intercom
Open browser → enter camera IP address → fill in account password → login

Enter the preview interface, click on the intercom button below to achieve intercom.

Note: The computer must have an omnidirectional microphone with intercom equipment recommended. For a detailed description of the network camera audio, refer to another article, “Examination Method for Testing the Problems of Sizheng Pickups”.
 
Two: use the client to achieve intercom
Open iVMS-4200 → enter device management → click on the server → refresh underneath Wait for the device to appear → select device → add client

Add client settings
Fill in Alias ​​→ Password → Add

After adding the interface management device, the device you added will appear

Return to the main preview interface right click → start intercom, you can start intercom.

Note: This article tests Haikang products as access devices. Different manufacturers have different settings interface, please configure according to the actual situation ... need remote intercom friend, the intercom system must have a remote function.

Bottom Shutters Profile Forming Machine

Bottom shutters door,only used at bottom of shutter door.Material thickness:1.5-3mm.

A rolling shutter bottom door or roller shutter door is a type of door that consists of many horizontal slats hinge together and the door opens and closes by raising up or lowering down along a rolling shutter door track or guide rails.

Automatic machine,with easy operation.The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously

Bottom Shutters Profile Forming Machine,Roofing Roll Forming Machines,Framing Roll Forming Machine,Bottom Forming Machine

Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com