Tight head pails,solvent buckets,Pails for solvent,Metal Pails,Tin Buckets Jiangsu Fast Pack Co., Ltd , https://www.fastmetalpacking.com
Solenoid valve installation Before using the product should refer to the instructions for use, whether it meets your requirements. The pipeline should be washed before use, the media is not clean filter should be installed to prevent impurities to prevent the normal operation of the solenoid valve. Solenoid valve is generally one-way work, can not be installed, the arrow on the valve is the fluid direction of the pipeline must be consistent. Solenoid valve installation level of the general body, the coil up vertically, some products can be any installation, but when conditions permit the best vertical to increase the service life. Solenoid valve in the ice should be re-heated work place, or set insulation measures. Electromagnetic coil lead (connector) is connected, you should confirm the firm, the contact electrical components should not shake, loose will cause the solenoid valve does not work. Continuous production of the solenoid valve to work, the best bypass, easy maintenance, does not affect the production. Solenoid valve after a long period of deactivation should be cleared to facilitate the use of condensate after the removal of all parts should be placed in order to restore the original state installed.