The brake system is a very important part of the car, and the use of brake pads also determines the effect of the brakes. In general, lighting vehicles are often used in urban areas. The wear and tear on the brake pads will be relatively large. As soon as the peak of morning and evening in Shanghai, the basic 10 meters will be a few times. In the case of high speed, it may take tens of kilometers before it needs to slow down and the number of brakes used is not much. Under normal circumstances, front-wheel drive car front brake pads wear faster than the rear wheel wear speed, rear brake pads are generally 80,000 to 90,000 kilometers, the front brake pads are generally 50,000 to 60,000 kilometers. If it is a small car or fan car, it will wear slightly faster. The wear of different cars is not the same. If there is a slight squeaking sound when braking, the distance between the brakes will become longer, and the brake warning system will be on. At this time, the brakes on the lighting car should be braked. The tablet is replaced. In fact, we can not use the brake warning light as the basis for replacing the brake pads, but the brake warning light is on the bottom line of the brake pads. Although all vehicles have this kind of warning light, the standard of different types of car brake pads is not the same, some of them are the thickness of the brake pads, and if the brake fluid drops rapidly, it will be bright, if the latter is very Dangerous. Every time you go to the 4s shop or garage repair, the technician will check the brake system. If you need to replace the brake pads, you must replace them in time. Dear friends do not think why the brake pads are not durable. In fact, no matter what brand of car, whether it is Japanese, American, or German, including domestic, will encounter the problem of loss of parts in the process of use. Not only are the brake pads, but the tires are also very frayed. With different road conditions or a certain amount of mileage, the rubber will explode. The same is true of other parts of the car, which will retire one day after long-term use. The above is a brief introduction to the service life of brake pads by Xiao Bian. (Wen/Jun Xun)
Metals, alloys and composite powders commonly used in thermal
spray hardfacing technology and coating service. These unique powders are
instantly heated by thermal spraying (welding) methods such as high temperature
flame or explosive flame, and are sprayed and deposited on the cold or hot
workpiece surface with high-speed heat flow in a molten or semi-melted state to
form a surface Reinforcing layer, in order to improve the wear resistance,
corrosion resistance, heat resistance, oxidation resistance or repair of
external dimensions of the workpiece surface. XTC produces WC, CrC, Oxide
Ceramic, Boride Powder, Metal Alloy Powder, Pure Metal and Spray Wire, etc.
product. For HVOF/HVAF/plasma/Flame spray coating and applications. Meet the
wear and corrosion resistance requirements of different surfaces.
WC, CrC oxide ceramic powder and boride
products are excellent in wear resistance and high temperature corrosion
resistance. Taking WC products as an example, the hardness can reach
HV1300-1500, and the temperature of CrC products can reach 800 degrees Celsius.
Metal alloy powder, Pure Metal and Spray
Wire products have more applications in glass mold, steel and machinery
industries. And XTC products are now become more and more popular in Metal
spray coating and thermal spray coating industry.
Coating Service,Metal Spray Coating,Flame Spray Coating,Thermal Spray Coating Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com
