The 3rd China International Fluid Machinery Exhibition, sponsored by the China General Machinery Industry Association, will be held at the Beijing Exhibition Hall from November 20th to 22nd. The exhibition will also hold the second sponsored by China General Machinery Industry Association and this newspaper. China International Filtration, Separation, Drying Equipment and Technology Exhibition. On the eve of the exhibition, the reporter interviewed Zhang Yubao, vice president and secretary-general of China General Machinery Industry Association.
Reporter: In recent years, how has China's general machinery manufacturing industry developed?
Zhang Yubao: General machinery covers industries such as pumps, fans, compressors, valves, gas separation and liquefaction equipment, gas purification equipment, filtration and separation machinery, vacuum equipment, drying equipment, variable speed reducer and dissolved acetylene equipment, etc. Important components are widely used in metallurgy, petrochemical, urban construction, power, environmental protection and other fields. Fluid machinery includes pumps, fans, compressors, valves, gas separation equipment, and gas purification equipment. It is a major part of general machinery manufacturing.
In recent years, China General Machinery has maintained an annual growth rate of around 30%, ranking third in the major industries of the machinery industry. In 2005, there were 3,747 large-scale and above-scale machinery enterprises. The total industrial output value was 170.856 billion yuan, up 43.58% over the previous year. The sales revenue was 164.585 billion yuan, up 45.1% over the previous year; the profit was 10.527 billion yuan, over the previous year. Increased by 42.99%. From January to September of this year, there were 3,990 enterprises above the scale of general machinery, with a total industrial output value of 163.055 billion yuan, an increase of 27.46% year-on-year; sales revenue of 156.745 billion yuan, an increase of 28.56% year-on-year; and a profit of 7.924 billion yuan, a year-on-year increase of 23.30%. . It is expected that the growth rate of the general machinery manufacturing industry during the “Eleventh Five-Year Plan” period may decline, but there is no problem in maintaining the average annual growth rate of more than 10%.
Reporter: What is the status of the filtration, separation and drying equipment industry in China? What are the major issues?
Zhang Yubao: In the general machinery manufacturing industry, the filtration and separation machinery and drying equipment industry is a relatively small industry. The annual output value of each industry is only several billion yuan. At the same time, there are a large number of companies in the industry, and the scale is generally small. If the output value of a separation equipment manufacturing enterprise exceeds 100 million yuan, it is already a large-scale enterprise. The annual output value of a large-scale drying equipment manufacturing enterprise will also be 56 million yuan.
One of the problems in the industry is that there is still a gap between the level of technology and that of foreign countries. Taking the Changzhou region where drying equipment companies are relatively concentrated as an example, there are problems of similar products, low-end products, and high-end products. Such as large-scale PTA device supporting the use of drying machine, the domestic has no performance, importing a set from abroad to spend 4 million to 5 million US dollars, equivalent to a domestic large enterprise a year's total output value. Unreasonable product structure will inevitably lead to a vicious circle of low-price competition and industry stagnation or even retrogression. Second, self-developed capacity is weak. At present, the domestic filtration, separation and drying equipment enterprises are basically private enterprises, and the remaining state-owned enterprises after restructuring There are few companies. State-owned enterprises are often overburdened with funds, lack of funds, and unable to carry out technological development; private enterprises are generally reluctant to invest in technological innovation, but are keen on imitation and are keen on immediate short-term profits. At the same time, the current foreign blockade of core technologies is very strict, basically no take-out and transfer, and even wary outsiders visiting the mission. Therefore, we must not rely on foreign countries to nurture our core technology and competitiveness, and we must have a self-reliance determination.
There are still many areas in the industry that need to work hard. The most important thing is to integrate resources, foster large enterprise groups and industrial clusters, and transfer to high-end industries. While actively promoting self-research and development, we should also strive for new technologies and cooperation. Ways and new breakthroughs.
Reporter: What kind of business opportunities will be provided at this exhibition for fluid machinery and filtration, separation, drying equipment manufacturing and user companies at home and abroad? What is the preparation for the exhibition?
Zhang Yubao: The exhibition of this exhibition has ended, according to statistics, the exhibition area will reach 26000m2. At that time, top companies in the domestic general machinery manufacturing industry, such as Shengu and Shaanxi Drum, will basically exhibit. In addition, there are dozens of well-known foreign companies, including the United States GE and Tyco, Germany KSB, Siemens and Linde, Japan Ebara and Hitachi, etc., Italy DOTT, South Korea's Samsung and Samson. To be sure, this exhibition will be General Motors' biggest and highest-level and most specialized exhibition in China and even in the world.
While actively inviting, we have not ignored the invitations to user companies and research institutes. At present, 200,000 tickets have been issued and more than 10,000 invitations have been invited. One-on-one invitations have also been invited for key user companies and design institutes.
The exhibition will provide a platform for mutual understanding and cooperation between the scientific research, manufacturing and users of general machinery. The more important purpose is to bring the industry up and condense into a hot energy, so that the hearts and minds of all parties will be further encouraged.

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com