Model NO.: YCB
Trademark: HENGNUO
Origin: Cangzhou
HS Code: 8413602990

Applacation:

It applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibres at temperature below 80 deg C and with the viscosity of 5-1500cSt. It applies to hydraulicSystem, too.

Applacation Scope:

It can give performance as transferpump or booster pump in oil delivery system, and a fuel pump for delivery, pressurization and injectiion in fuel supply system. It can be also applied as hydraulic pump suplying hydraulic power in hydraulic system and in all industy fields as lubricating pump.


Structure Features:

YCB series gear pumps are mainly composed of gears, axles, pump body, pump cap, bearing sleeves and axle-end seals, etc. The gears are adoped double circular teech shape, which makes the gears less wear on gear surface, stable revolution, low noise, long service life and high efficiency, due to on sliding on the teeth during gear falling-in. This kind of pump has got rid of traditonal design and come into a new decade in designing and application.
The pump is designed with safety valve for protection against overload. The full return flow pressure is 1.5times higher than the rated exhaust pressure of the pump. It can be adjusted within the allowance of exhaust pressure range according to Circumstance. But please note the safety valve can't be applied as presusure-reducing valve for long time. You may install pressure-reducing valve separately on pipe-line if needed.
There are two kinds of axle-end seals, mechanical seal and packing seal, which can be chosen according to the clients' requirement or application circumstance.


Technical parameter:

Flow: 0.6m3/h~80m3/h
Pressure: 0.6Mpa~2.5Mpa
Speed: 970rpm~2900rpm
Dia of inlet & outlet: 25mm~150mm
Model Capacity Speed
r/min		 Exhaust
Pressure
Mpa		 (NPSH)r
m		 Efficiency
η %		 Motor
m 3 /h Hz Power
kw		 Model
YCB0.6-0.6 0.6 910 0.6 5.5 32 50 0.75 Y90S-6
1.0 1390 50 0.75 Y80L2-4
0.7 1130 60 0.75 Y90S-6
1.2 1710 60 0.75 Y80L2-4
YCB0.6-2.5 0.6 910 2.5 7.0 70 50 1.1 Y90L-6
1.0 1400 50 1.5 Y90L-4
0.7 1130 60 1.1 Y90L-6
1.2 1710 60 1.1 Y90S-4
YCB1.6-0.6 1.6 910 0.6 5.5 42 50 0.75 Y90S-6
2.5 1400 50 1.1 Y90S-4
1.9 1130 60 1.1 Y90L-6
3.0 1710 60 1.5 Y90L-4
YCB1.6-2.5 1.6 940 2.5 7.0 71 50 2.2 Y112M-6
2.5 1440 50 4 Y112M-4
1.9 1150 60 2.2 Y112M-6
3.0 1750 60 4 Y112M-4
YCB3.3-0.6 3.3 940 0.6 5.0 60 50 1.5 Y100L-6
5.0 1420 50 2.2 Y100L1-4
4.0 1150 60 1.5 Y100L-6
6.0 1730 60 2.2 Y100L1-4
YCB3.3-2.5 3.3 960 2.5 7.0 72 50 5.5 Y132M2-6
5.0 1440 50 7.5 Y132M-4
4.0 1170 60 4 Y132M1-6
6.0 1750 60 7.5 Y132M-4
YCB4-0.6 4.0 940 0.6 5.0 60 50 1.5 Y100L-6
6.0 1420 50 2.2 Y100L1-4
4.8 1150 60 2.2 Y112M-6
7.2 1730 60 3 Y100L2-4
YCB4-2.5 4.0 960 2.5 7.0 72 50 5.5 Y132M2-6
6.0 1440 50 7.5 Y132M-4
4.8 1170 60 5.5 Y132M-6
7.2 1750 60 7.5 Y132M-4
YCB8-0.6 8.0 960 0.6 5.0 61 50 3 Y132S-6
12.0 1440 50 5.5 Y132S-4
9.6 1170 60 4 Y132M1-6
14.4 1750 60 5.5 Y132S-4
YCB8-2.5 8.0 970 2.5 7.0 75 50 11 Y160L-6
12.0 1460 50 15 Y160L-4
9.6 1170 60 11 Y160L-6
14.4 1760 60 15 Y160L-4
YCB10-0.6 10.0 960 0.6 5.0 62 50 4 Y132M1-6
15.0 1440 50 5.5 Y132S-4
12.0 1170 60 5.5 Y132M2-6
18.0 1750 60 7.5 Y132M-4
YCB10-2.5 10.0 970 2.5 7.0 76 50 11 Y160L-6
15.0 1470 50 15 Y160L-4
12.0 1170 60 11 Y160L-6
18.0 1770 60 18.5 Y180M-4
YCB20-0.6 20.0 970 0.6 5.0 68 50 7.5 Y160M-6
24.0 1170 60 7.5 Y160M-6
YCB25-0.6 25.0 970 0.6 5.5 69 50 11 Y160L-6
30.0 1170 60 11 Y160L-6
YCB30-0.6 30.0 970 0.6 5.5 70 50 11 Y160L-6
36.0 1170 60 11 Y160L-6
YCB40-0.6 40.0 970 0.6 5.5 72 50 15 Y180L-6
48.0 1180 60 15 Y180L-6
YCB50-0.6 50.0 970 0.6 5.5 72 50 22 Y200L2-6
60.0 1180 60 22 Y200L2-6
YCB60-0.6 60.0 1470 0.6 5.5 72 50 22 Y180L-4
YCB80-0.6 80.0 980 0.6 5.5 72 50 30 Y205M-6

Positive Pressure EGR VALVE

Positive Pressure

Yibin Tianruida Auto Parts Co.,Ltd , https://www.trdautoparts.com