The windshield of a car can determine whether the driver's line of sight is clear or not. In summer and winter, due to the complex climatic conditions, the windshield glass is prone to problems such as mirror fog or mirror reflection, and the driver can easily confuse driving at night or in bad weather conditions. Line of sight, affecting driving safety. In the case of heavy rain in summer, many glassy insects such as flying insects or traces of rain will remain on the surface of the glass. In winter, some rain and snow can easily cause frost on the mirror surface. These problems seem simple, but It is not easy to handle it. 1, the rational use of glass water There are a large variety of glass waters sold on the domestic market, but they can be divided into three types: glass water in the summer, antifreeze glass water in winter, and antifreeze glass water in special effects. The glass water used in summer is mainly used to remove flying insect remnants on the mirror surface; in winter, the antifreezing glass water is mainly used to ensure that the car parts will not be frozen when the temperature is lower than minus 20 degrees Celsius; special antifreeze glass water is It is mainly used in areas that are particularly cold in the north, ensuring that cars do not freeze at minus 40°C. In the ordinary glass maintenance process, we need to select suitable glass water according to the season and the specific conditions of the weather. When we find that the surface of the windshield glass is obscure, it will be brighter with suitable glass water. In the evening, the problem of glass reflections can also be wiped with glassy water. In addition, in the case of running high speed or dusty conditions, glass water can be used very quickly, and it is necessary to pay attention to the injection of new glass water immediately. Some owners think that cleaning glass can only be cleaned and decontaminated. Therefore, using detergent or detergent to replace glass water, some car owners are even cheaper to use, instead of directly using clean water, these are hidden problems. There are some deposits in chemical detergents such as washing powder. It takes a long time to easily corrode the rubber tubes, and it will block the water outlets. In severe cases, it will damage the motor. The general detergent will continue to corrode the rubber tube to accelerate the hardening of the catalyzed wiper strip. When the hardened strip scratches the windshield, it will accelerate the scratching and scratching of the windshield surface. If the wiper is replaced again, the cost will be several ten times that of glassy water. Although the ordinary clean water is very clean, there are also many chemical residues inside, and over time, it can cause the water outlet to clog and affect the water spray. If you use it for a long period of time, the frictional force of the mirror will increase, and the wiper will easily leave a slight scratch on the mirror surface during cleaning. 2, car film that thing In summer, a thin layer of insulation film can play a big role, not only can withstand the hot sun, but also heat insulation, UV protection. Insiders pointed out that the heat insulation effect is one of the important reasons for consumers to choose a film. In addition, the light transmittance and UV protection index of the heat insulation film are all consumers must care about. However, many consumers have many misunderstandings about the insulation film. Car foil to better protect glass The automotive insulation film is divided into front and rear windshields and side windshields. Among them, the most demanding insulation film is the front windshield. According to the provisions of the National Traffic Safety Regulations of the Ministry of Public Security, the light transmittance of the front windshield must be greater than 70% so as to precondition the driving safety. The front windshield is the most taboo against the dark color film. In addition, when selecting the UV resistance index of the thermal insulation film, the higher the better, because it can protect the center console parts and prevent premature aging by long-term solar irradiation. In the case of side windshield thermal insulation film, it is also premised that the owner is not observing the rearview mirror. The optional thermal insulation film on the side windshield is more flexible and more varied in color. For example, the owner likes blue light insulation films. In addition, there is no direct relationship between the insulation effect of the insulation film and the color depth. The coating process inside the insulation film is the key factor in determining the insulation effect. The higher the insulation rate of the insulation film, the more reflective. In general, the thermal insulation film with a thermal insulation rate of 60% in the market is already a good product. If the product itself claims to have up to 80%, or even 90% of the insulation rate, consumers will have an extra eye. If the car is equipped with a GPS navigator, the owner should choose non-metallic film products, because most of the explosion-proof membranes on the market today still belong to the metal film, which does cause interference to GPS signals. In addition, the film has a simple process: the instrument shop towels, keep clean - clean the glass - cut the film - the insulation film in the car window shape - according to the shape of the glass, trim angle - inner glass clean - formal Film - drowning, blowing the corner with a hair dryer - the final cleaning. These steps are indispensable. If the film is not effective, the owner can ask the shop to rework, so that the car glass can be best protected. 3, to the car on the glass insurance The separate glass breakage insurance, that is, the insurance company is responsible for the compensation of the insurance vehicle in the course of the use of a separate commercial insurance of the loss of the glass of the vehicle. Separately broken glass means that only the windshield and the window glass (excluding the headlights, mirror glass) of the insured vehicle are damaged. In addition, if you are insured according to the imported glass rate, the insurance company will be compensated according to the price of imported glass. If you choose to insure the domestic glass rate, the insurance company will make compensation according to the price of domestic glass. To buy a glass car insurance, can effectively ensure the safety of the glass, the owner can also be assured of driving.
Fluoride is a general-purpose non-flammable liquid, which can be used in various important industrial applications. With excellent dielectric properties and a wide range of boiling points, these liquids have excellent material compatibility and thermal stability. Nuclear power plant will generate a lot of heat in the process of power generation. In order to achieve efficient power generation, good heat dissipation system and mode are indispensable. Fluorocarbon refrigerants have a conventional choice of up to 55KV dielectric strength and boiling point of 47 degrees. 0ODP. Our pursuit of environmental protection and scientific and technological progress.
Cooling Solutions,Fluorocarbon Refrigerant For Nuclear,Fluoride Liquid For Nuclear Power,Refrigerant For Nuclear Power Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtechs.com