Model NO.: W6 W9 W12 W15
Transport Package: 24PCS/Stick 5760-13824PCS/CTN
Specification: CROWN: 24.8mm THICKNESS: 0.5mm
Origin: China
HS Code: 7317000000
We are the manufacturers of corrugated fastener/joint pins/wood joiners used in plywood flush doors, wooden frames, etc. These are available in different sizes 3/8", 1/2", 5/8",3/4" in bulk production. Very high quality hard and sharp to easily pierce into wood.

 Corrugated fasteners are made of 18- to 22-gauge sheet metal with alternate ridges and grooves. One end is cut square, and the other is sharpened, with beveled edges. These fasteners are made in different lengths and widths. The width varies from 5/8 inch to 1-1/8 inches, and the length ranges from 1/4 to 3/4 inch. Corrugated fasteners are used to fasten parallel boards together. Typical uses for corrugated fasteners are in mitered corners, butt joints, and end joints. Corrugated fasteners have greater holding strength than nails in small timber. They are driven with a hammer. 
W Series Corrugated Fasteners
Fit tools of BeA W15,and most 25mm crown corrugated tools in the market.
 
ITEM LENGTH PCS/BOX BOXES/CTN
W6 1/4" 6.0mm 13824 72
W9 11/32" 8.8mm 9216 72
W12 1/2" 12.0mm 6910 72
W15 5/8" 14.4mm 5760 72
Bea Type W Series Corrugated FastenersBea Type W Series Corrugated Fasteners
 

R406A Refrigerant Gas

Refrigerant gas R406A is a mixture of three components chlorodifluoromethane (R-22), isobutane (R-600a) and chlorodifluoroethane (R-142b) in the ratio 55/4/41. This refrigerant was designed as a drop-in replacement for R-12 which is compatible with the typical mineral oil lubricants used in R-12 systems. Since it is a zeotropic mixture, it has a range of boiling points which may increase the effectiveness of the heat transfer elements in refrigeration equipment.

R406A Refrigerant Gas,R12 Replacement Gas,R406A Replacement Gas

Zhejiang Jinze Refrigerant Co.,Ltd , https://www.uiszl.com