According to the website of the General Administration of Quality Supervision, Inspection and Quarantine, BMW (China) Automobile Trading Co., Ltd. recently filed two recall plans with the AQSIQ. BMW (China) Automobile Trading Co., Ltd. will recall some of the imported BMW 5 Series GT, 7 Series and Rolls-Royce Gust cars in 2012, involving a total of 22,879 vehicles in mainland China; and July 9, 2015 to 2015 The imported BMW 1 Series and X series vehicles produced during the period from June to June 2014 have a total of 69 vehicles in mainland China.
CTK-KC600
1. Grooving on HSS Saw Blade teeth can improve Saw Blade cutting ability, reduce tube end burs, extend life time and decrease cutting cost.
2. The machine can make groove on teeth in one circle.
3. The machine working parts move right and left, up and down pneumatically. The groove depth is adjusted mechanically.
4. Super speed spindle(RPM20000-30000) makes the machine be able to groove on HSS saw blade and tungsten carbide saw blade.
Saw Blade Slotting Machine,Grinder To Circular Saw,Circular Saw For Grinder,Pneumatical Saw Blade Slotting Machine GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com
Recently, BMW (China) Automobile Trading Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, saying that since December 16, 2016, some of the imported BMW 5 Series GT, 7 Series, Rolls-Royce Guth Special car. According to the company's statistics, there are 22,879 vehicles in mainland China. The details are as follows: BMW 5 Series GT cars produced between December 5, 2011 and June 29, 2012, totaling 5,216 vehicles; BMW 7 Series cars produced between December 2, 2011 and June 21, 2012, A total of 17,327 vehicles; a total of 336 Rolls-Royce Gustel cars produced between December 17, 2011 and July 20, 2012.
The airbag control module cannot work normally due to the supplier's problem within the scope of this recall. In the event of a collision, the airbag, seat belt pretensioning device and active headrest will not be able to start, posing a major safety hazard. BMW (China) Automobile Trading Co., Ltd. will replace the modified airbag central sensor module for vehicles within the recall range. BMW (China) Automobile Trading Co., Ltd. advises relevant users to stop using the vehicle before the vehicle is repaired.
In addition, BMW (China) Automobile Trading Co., Ltd. will recall the imported BMW 1 Series and X Series from 2014 to 2015, which will be produced from July 9, 2014 to June 19, 2015, starting from December 30, 2016. car. According to the company's statistics, there are 69 vehicles in mainland China. The details are as follows: Partially imported BMW 1 Series 118i vehicles produced on July 9, 2014, totaling 2 vehicles. A total of 67 imported BMW X3, X4, X5 and X6 vehicles were produced from August 21, 2014 to June 19, 2015.
Due to the supplier's problem, the EPS control module cannot work normally during the recall. The steering assist failure may occur when the vehicle is running, or the EPS control module may heat up, causing fire risk and potential safety hazards. BMW (China) Automobile Trading Co., Ltd. will replace the modified steering gear assembly (the EPS control module is integrated into the steering gear assembly) for the vehicle within the recall range. Relevant users should drive carefully and pay close attention to the working conditions of the steering system of the vehicle. If there is a steering system alarm or a different response, contact the dealer to check the vehicle as soon as possible. Contact the dealer for repair as soon as possible after the recall has started.