Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength. Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.
Classified by structure: (1) center seal butterfly valve (2) single eccentric seal coal valve (3) double eccentric sealing butterfly valve (4) three eccentric sealing butterfly valve seal material classification: (1) soft seal butterfly valve. 1) The sealing pair is made of non-metallic soft material to non-metallic soft material. 2) The sealing pair is made of metal hard material to non-metal soft material. (2) metal seal butterfly valve. The sealing pair is made of metal hard material to metal hard material. Classified by seal (1) Forced seal butterfly valve 1) Elastomeric seal butterfly valve. Sealing pressure ratio by the valve is closed when the valve plate squeeze valve seat, valve seat or valve plate flexibility 2) plus torque butterfly valve. Sealing than the pressure applied by the valve shaft torque (2) pressure sealing butterfly valve. Sealing than the pressure from the valve seat or valve plate elastic seal components generated pressure (3) automatic sealing butterfly valve. Sealing pressure is automatically generated by the media pressure. According to the connection classification (1) on the butterfly valve. (2) Flanged butterfly valve. (3) Bellow butterfly valve. (4) welded butterfly valve. Search Keyword: More Valve Technical Articles