Expander can process heat exchange coil expanding, there are Hydraulic Vertical Expander, Hydraulic Horizontal Expander,Servo Horizontal Expander, Combined Servo Expander , Servo Vertical Expander ,Stainless Steel Portable Expander for different coils size and application. We would like to suggest you ideal machine as your production information.
The basic principal is expaning the coils by using hydraulic system or mechanical friction force, thus fin and tubing will be contacted tightly. Expanders Vertical Expander, Horizontal Expander, Portable Expander,Hydraulic Vertical Expander,Servo Vertical Expander,Hydraulic Horizontal Expander,Servo Horizontal Expander, Combined Servo Expander,Stainless Steel Portable Expander Satis Products Co., Ltd. , https://www.satismachinery.com
TEKORO Catalytic Converter Cleaner can effectively solve the problems of catalytic converters such as sulfur-phosphorus compound blockage, poor exhaust, power loss, increased fuel consumption, and shortened life. At the same time, it can be used to clear the carbon deposition and sludge in combustion chamber, intake valve, fuel injectors and other parts. It will reduce exhaust emissions and fuel consumption, improve power performance, restore the exhaust purification function of catalytic converters and extend its life.
Usage:
Precautions:
1. Open the bottle cap of cleaning agent first, and screw on the dedicated tool;
2. Disassemble the vacuum tube of the vehicle, connect to the tube of cleaning tool, close the control valve in the cleaning tool (left: open, right: close), start the engine, open the control valve and clean at idle speed;
3. It is easy to cause black smoke or flame if the flow is too high while cleaning; please adjust the flow appropriately;
4. Pay attention to the running mileage while cleaning; if the mileage is less than 5,000km, conduct routine catalytic converter cleaning; if more than 5,000km, please clean at idle speed;
5. Cleaning time: clean 25 minutes for vehicles with displacement lower than 1.6L, and clean 40 minutes if the displacement is higher than 1.6L;
6. Do not clean in the following situations:
catalytic converter sintering or lead poisoning; serious blockage in catalytic converter; carburetor is modified to catalytic converter; the engine is burning engine oil.
Advice: After cleaning, the vehicle needs to run about 5 km to discharge the waste.
1. Use together with dedicated cleaning equipment or special tool;
2. For specific usage, refer to the instructions for cleaning equipment or special tool;
3. Avoid splashing the product into eyes; in case of accidents, wash with clean water immediately and go to the hospital for treatment;
4. Store in a cool and dry place, and keep it away from children.