Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Tyre Pyrolysis Plant Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
1. Our valves are 100% leak tested and are made of only the highest quality materials
2. Our factory is one of top leading manufacturers in China.Â
3. The other term can be negotiatedÂ
XH NO.Â
Brass stem height
Total Stem height
RIM HOLE
TR-600HP
31.5
44.5
11.5
TR-602HP
50.5
63.5
11.5
TR-801HP
33
47.5
11.5
TR-802HP
50.5
65
11.5
High pressure Tubeless snap-in type tire valve
1. Our valves are 100% leak tested and are made of only the highest quality materials
2. Our factory is one of top leading manufacturers in China.Â
3. The other term can be negotiatedÂ
XH NO.Â
Brass stem height
Total Stem height
RIM HOLE
TR-600HP
31.5
44.5
11.5
TR-602HP
50.5
63.5
11.5
TR-801HP
33
47.5
11.5
TR-802HP
50.5
65
11.5
Model NO.: TR-600HP
Trademark: XINGHUA
Transport Package: Neutral Packing
Origin: China
HS Code: 8481804090
Model NO.: TR-600HP
Trademark: XINGHUA
Transport Package: Neutral Packing
Origin: China
HS Code: 8481804090
High pressure Tubeless snap-in type tire valve