Hot Melt Adhesive For Plastic Straw First of all, straw hot melt adhesive is a kind of hot melt adhesive strip or particle, which is heated and melted by hot melt adhesive gun and sprayed or smeated on the surface of the object that needs to be bonded, waiting for the melt adhesive to cool and solidify to form a stable bond. The color and hardness of hot melt adhesive are different, and different types of hot melt adhesive can be selected according to your needs. Hot Melt Adhesive For Plastic Straw,Food Hot Melt Adhesive,Food Straws Hot Melt Adhesive,Straws Hot Melt Adhesive Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com
Ceramic sand granulator is also called ceramic sand pan-pelletizer and Ceramic pelleting machine. It is mainly composed by disc, large bevel gear, bevel gear, the spindle box, horizontal shaft, angle adjusting device, scraper, transmission device, Housing and so on.
The motor is drived by gearbox and belt connection. Gearbox output shaft side with bevel gear, and meshing with large bevel gear. The large bevel gear connected by screw bolt and disk.
So when the motor starting, The disk will rotate meantime.
It is a necessary equipment for pelletization process in the Non-ferrous or ferrous material industries, After the pelleting, The material will be smelted directly to increase the added valve.
Ceramic Sand Ball Production Principle:
Dense growth period: Due to the continuous water, feeding, and the cue ball rolling in the tray, the surface of the water film cue ball has also been suction water, again and again gradually feeding the ball the cue ball. Also, when the mechanical action due to rolling, the density of the ball is also expected to gradually increase, coupled with the role of bonding clay, feed the ball to a certain mechanical strength, until it meets the requirements of the raw material to form the ball.
Under the continuous water feeding, material feeding, The cue ball roll in the tray, The cue ball surface absorb the water and material continuously. Thus again and again, cue ball will become pellet. Pellet also become strengthen. Adding the clay cohesive action, pellet has certain mechanical strength until it becomes the required raw pellets.
Â
Model
Rotation speed of disk (r/min)
Capacity(t/h)
Power(kw)
Adjusting range of disk gradient
Dimensions( m )
Weight (kg)
Ø2.2
14.25
4-8
7.5
35-55
2.8*2.75*2.58
2850
Ø2.5
11.81
5-10
7.5
35-55
3.2*2.3*3
3250
Ø2.8
1.21
12-16
7.5
35-55
3.4*2.6*3.1
3710
Ø3.0
11.3
15-18
11
35-55
3.7*2.7*3.3
4350
Ø3.2
9.6
15-20
11
35-55
3.9*2.7*3.4
5110
Ø3.6
9.1
18-24
15
35-55
4.3*3.1*4.0
6510
Then, the use of straw hot melt adhesive need to pay attention to some matters. First of all, you need to select the appropriate hot melt Glue Gun and hot melt glue strips or particles to ensure that they are suitable for the surface of the object that needs to be glued. Secondly, it is necessary to pay attention to the temperature and flow rate of hot melt adhesive, too high or too low temperature and flow rate will affect the bonding effect of hot melt adhesive. In addition, it is necessary to pay attention to the use environment and shelf life of hot melt adhesives to avoid affecting the quality and effect of hot melt adhesives.
Third, straw hot melt adhesive has a variety of advantages. Pipette hot melt adhesive has fast, efficient and stable bonding effect, which can achieve high quality sealing and fixing. At the same time, the straw hot melt adhesive has good water resistance, corrosion resistance, high temperature resistance and other properties, can be applied to a variety of environments and occasions. In addition, the straw hot melt adhesive also has the characteristics of simple operation, no pollution, economic and practical, which has brought a lot of convenience and advantages for production and manufacturing.
In addition, straw hot melt adhesive can also be used in a variety of fields and materials bonding and sealing. Straw hot melt adhesive can be used for bonding and sealing of paper, plastic, metal, ceramics and other materials, and can be applied to packaging, manufacturing, construction and other fields, with a wide range of application scenarios and market demand.
In short, straw hot melt adhesive is a fast, efficient, stable and other advantages of industrial hot melt adhesive, with a wide range of application scenarios and market demand. When using straw hot melt adhesive, it is necessary to pay attention to the selection of hot melt adhesive, the control of temperature and flow rate, so as to avoid affecting the quality and effect of hot melt adhesive.
Model NO.: Various Model
Brand Name: Zk(Bm)
Factory Area: 55000m2
Advantage: Professional Manufacture
Experience: More Than 50 Years
Trademark: ZK
Transport Package: Standard Export Packing
Specification: ISO9001, ISO14000
Origin: Zhengzhou, Henan, China
HS Code: 8417
Henan Zhengzhou Mining Machinery Co., Ltd. Was founded in 1956, is designated units and the Ministry of Machinery Industry Henan Mechanical and Electronic Industry Department designated cement and washing Equipment, after half a century of development, from the initial single production plants become an area of? ? 70, 000 square meters, plant construction area of 40, 000 square meters, the existing six modern workshop, two modern reloading plant, a technology center in Zhengzhou city, a variety of large and medium-sized metal processing, welding, assembly equipment, more than 260 pieces (sets), fixed assets of millions, scientific research, design, development, manufacture, sale, installation, commissioning and training services for an integrated modern enterprise. Currently, the company is the largest professional magnesium metal equipment supplier, has 25 years to maintain the industry first.