Cobalt-based alloy powders are commonly used in laser cladding processes due to their excellent wear resistance, high temperature strength, and corrosion resistance. These alloys typically contain varying amounts of cobalt, chromium, tungsten, and nickel, among other elements, to achieve specific properties. Cobalt 12 Alloy Powder,Cobalt 21 Alloy Powder,Cobalt 6 Alloy Powder,Cobalt Laser Cladding Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com
The laser cladding process involves melting the cobalt-based alloy powder using a high-energy laser beam and depositing it onto a substrate to form a protective coating. This coating helps to enhance the surface properties of the substrate, such as hardness, wear resistance, and corrosion resistance.
Some common cobalt-based alloy powders used in laser cladding include:
1. Stellite: This is a well-known cobalt-chromium-tungsten alloy that offers excellent wear and corrosion resistance. It is often used in applications where high temperatures and abrasive environments are present, such as in oil and gas drilling tools, valves, and pump components.
2. Tribaloy: Tribaloy alloys are cobalt-based alloys that contain varying amounts of chromium, molybdenum, and silicon. They are known for their exceptional high-temperature strength and resistance to galling, making them suitable for applications in the aerospace, petrochemical, and power generation industries.
3. Haynes alloys: Haynes alloys are nickel-cobalt-chromium-molybdenum alloys that offer excellent high-temperature strength, oxidation resistance, and corrosion resistance. They are commonly used in applications where extreme heat and corrosive environments are present, such as in gas turbines and chemical processing equipment.
These cobalt-based alloy powders are available in various particle sizes and can be tailored to meet specific application requirements. They can be used with different laser cladding techniques, such as powder-fed laser cladding or blown powder laser cladding, depending on the desired coating thickness and properties.
Overall, cobalt-based alloy powders for laser cladding provide enhanced surface properties and improved performa
1. Brake valve adjustment 1) The balance spring pre-tensioning should be 300-350N, adjust, the increase or decrease the gasket between the spring and the bushing to be adjusted. 2) The distance between the intake valve and the stem head is generally 16-16.4mm. If the distance is too small valve opening is not enough, the head can be repaired with brazed stem; if the distance is too large, the inlet valve closed lax and leaks, you can file the stem of the head. 3) exhaust valve adjustment. The distance between the exhaust valve housing and the stem head should be (4.5 ± 0.5) mm. In the adjustment, increase or decrease the exhaust valve housing and brake adjustment between the gasket, to be adjusted. 4) pedal free travel adjustment. Adjustable brake valve arm free stroke adjustment screw, the stroke of 1-3mm. Screw into the free travel reduced, and vice versa increases. 2. Brake Room Inspection and Repair 1) Brake chamber diaphragm cracks, deformation or aging loss of elasticity, it should be replaced. 2) The brake chamber spring has obvious deformation, bending, it should be replaced. Two brake chamber spring tension should be consistent, or should be adjusted. 3) Putter bending, platen on the putter loose, it should be repaired. Putting fork pin hole wear, should be surfacing repair. 4) After the brake chamber is installed, the push rod should not protrude part of more than 40mm, push rod stroke of 20-40mm. Brake room work, should be flexible movement without block phenomenon, and should not leak. 3. Wheel brake 1) brake cam, camshaft and bearing journal wear, can be surfacing after repair repair. 2) Wheel brake shoe clearance adjustment: Turn the camshaft so that the shoe top and brake hub clearance of 0.4mm. Turn the adjustment worm on the brake camshaft adjustment arm so that the clearance between the friction plate and the brake hub is reduced to 0.4 mm. When adjusting the lower end of the hoof, first loosen the shoe shaft lock nut and turn the shoe shaft until the clearance between the lower end of the shoe and the brake hub is 0.2-0.6 mm, then tighten the lock nut. More Search Keywords: Valve