Summer is the thunderstorm weather season, coupled with the summer is the peak power season, in the event of a lightning strike wire line, resulting in power outages, will greatly affect people's safety and quality of electricity. However, for a long time, the disconnection of the insulated conductor by lightning has been a difficult problem that plagued the operation of the distribution line. After the insulated conductor is struck by lightning, the lightning current is found to release the lightning current at the nearest release point of the line, and the high- Cause a disconnection accident. According to this principle, in recent years, a series of lightning protection measures against lightning strikes have been used in wire lines, such as direct-coupled zinc oxide arresters and mutual-surge arresters. These measures are lightning arrestors installed on the insulator of the wire line lightning protection, as soon as possible through the arrester shunt release discharge caused by lightning, has played a certain role, but the lightning will inevitably hit the wire line, causing the line Trip accidents, seriously affecting the reliability of distribution lines and continuous power supply, to explore effective lightning protection measures imminent. Recently, Nantong Electric Power Design Institute designed the top of the wire line to install a single lightning line lightning protection measures. The lightning conductor is arranged in parallel above the conductor. Each point of the conductor corresponds to a protection range of 30 degrees below the conductor. The advantage lies in that the lightning strike no longer directly bears on the conductor, but rather runs on the conductor above the conductor, Direct shunt wire lightning generated electricity, effectively enhancing the power supply reliability of the wire. At present, the lightning protection pilot program of this wire line has been coordinated and supported by the technical management staff of Nantong Power Supply Company, and will be carried out in "20kV Hengshan line 425001 # 425027 # pole insulated maintenance" and "20kV sea Line 42001 # ~ 42028 # pole insulation repair "project put into effect, and is expected to finish construction in the peak summer. Once the lightning protection effect of this technology has been confirmed, it will provide powerful technical support for the improvement of lightning protection technology of low voltage insulated wire in Nantong area.
1. Multifunctional handle
2. Strong power
3.Superior gradeability
4. Buffered pedal
5. Dual balance wheel device
6. Emergency power-off switch
Electric Stacker, or walkie stacker, is an
industrial device for loading and lifting pallets on a shelf at high level. As
an ideal choice to operate in narrow space of warehouse, it can be widely used
in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries,
as well as ports, railways, freight yards, warehouses.
Compared with the traditional manual stacking,
Zowell full electric stacker maintains great advantages in safety, efficiency
and cost. In addition to durability and accuracy both outside and inside,
Zowell XE electric stackers are also equipped with mast with clear view, double
speed and lateral vertical moving switch, which are valuable when working in
limited space.
The standard load capacity of XE series
ranges from 1 ton to 2 tons, two driving modes: walking and standing driving. If
you need bigger capacity or other customized options such as rod, low mast,
grabbling frame, please contact us so that we can provide you best solution
with professional knowledge.
Full Electric Stacker,Electric Stacker Truck,Electrical Stacker,Electric Stacker Lifter Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com
The multifunctional handle is imported from
Germany. It has integrated control functions including a speed button, horn
button, emergency reversing button and lifting button. The handle has an
emergency reversing button which can effectively protect the operators from
being hurt in accident involving falling items. The handle can realize braking
both in vertical and horizontal position. The human-machine design is quite
safe and the operation is more comfortable.
This stacker adopts high efficiency motor which
can be precisely controlled and the output power is strong. The turning control
can be optionally equipped with EPS. It can help the driver with turning by
using electronic control device to produce auxiliary power of relative level
and direction according to the torque signal and speed signal. So the operation
of the driver can be more convenient and precise and the movement can be more
stable and reliable.
The powerful motor and 5 wheel stacker structure
can provide superior stability and gradeability, so that the truck can have
sufficient gradeability when it is fully loaded.
The foldable pedal can save space when the
stacker is not in use. It can also effectively protect the drivers from being
effected by the bumping and give feedback to the driver with the road
condition.
This stacker is equipped with a dual balance
wheel so that it can overcome roadblocks easier and the running can be more
stable.
The power can be rapidly cut off in emergency to
ensure safety.