-
Model NO.: 975-875
-
Certification: CE, ISO, ISO9001: 2000, Ce, SGS
-
Customized: Customized
-
Transmission Method: Hydraulic Pressure
-
Suitable to Process: Color Steel Plate, Galvanized Board, Aluminum Plat
-
Warranty: 2year
-
Method: Roll Forming
-
Product: Tile
-
Automation: Automatic
-
Transport Package: Main Machine Is Nude
-
Origin: Cangzhou Hebei China
-
Tile Type: Colored Steel
-
Condition: New
-
Usage: Roof, Wall
-
Color: as You Desire
-
Width of The Plate: 1000mm
-
Type: Single Deck Roof Sheet Roll Forming Machine
-
Processing: Roll Forming
-
Brick Raw Material: Color Steel
-
Trademark: XDL
-
Specification: 13*1.4*1.5
-
HS Code: 84552210
Brief introduction:
The
roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
-
Unit Price, Quantity, Total Amount
Name |
Quantity(SET) |
Amount(USD) FOB Tianjin new port
|
840-900 Double Deck Roof Roll Forming Machine
|
1 |
10000
|
The quotation is valid for 15 days. The price will be based on other factors change (e.g. exchange rate).
|
-
Packing Method
Main machine is nude,Â
the computer control box is packed by carton box.- Transportation
 All machines need one 40 feet container to hold. If your company is not in China, We are in Tianjin port to delivery.If you are located in China. Please tell me your shipping address, and select the mode of transportation.- Payment Term
  Â
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment6.Delivery Time   Within 40 days after receiving deposit- Warranty:
  Â
One year,and we will provide technical support for wholelife of the equipment.Our company used the brand partsÂ
about Schneider or Delta Electronics and so on, According to the customer need to choose.Easy to global sourcing. Overall easy loading and unloading machine. Customers can according to the need for replacement parts.Â
And our company provide global service.After we receive the deposit, our designer will arrange the producing of the machine. After assembling, we will debug the machine and  at the same time, we will make video for the clients and teach them how to operate the machine. Before shipping, the machine is tested in our factory. when the client gets the machine,Â
he can according to our video to operate the machine. If some parts of machine broken within 1 year, we will give him the spare parts for free. If more than 1 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect. If you need, we can go to your place to assist you. But you need to provide the cost of the engineer. Â
If you can provide better drawings, we can produce machine for you.
- Raw material
|
material spec |
colored steel sheet, galvanized steel sheet, aluminum sheet
|
thickness of coil sheet |
0.2-0.8 mm
|
material expand width |
1000mm |
Efficiency width
|
840Â and 900mm
|
- Machine details
|
roller material |
high grade NO. 45 forged steel with 0.05mm hard chrome plating |
shaft material |
high grade NO. 45 carbon wrought steel |
cutting blade |
Cr12 mould steel with quenched treatment |
diameter of shaft |
70mm or as your requirement |
main frame |
300 H steel |
forming steps |
Up layer:9Â rows Down layer:11rows
|
productivity |
20-25m/min
|
hydraulic station power |
4 KW |
hydraulic pressure |
10-12MPa |
controlling system |
famous PLC computer control |
material of  cutting table |
Cr 12 mould steel with quenched treatment |
appearance size |
6700mm*1500mm*1510mm
|
hydraulic oil |
40# hydraulic oil |
Electric tension |
380V 50 Hz 3 Phase or as your requirements |
-
After sale-services
|
Delivery |
30 workdays after receiving the deposit |
Warranty
|
one year warrantly and lifelong technical suport will be kind and effective provided.
|
Payments
|
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment |
Â
-
Device Configuration
No |
 |
number |
(1) |
Manual decoiler |
1 set |
(2) |
Guiding device |
1 set |
(3) |
Main roll forming machine |
1 set |
(4) |
Hydraulic cutting device |
1 set |
(5) |
PLC electric control system |
1 set |
(6) |
Hydraulic driving system |
1 set |
(7) |
Special tools and parts |
1 set |
-
Equipment For Process Flow
Consist of Decoiler, Main roll forming machine, Cutting device, Hydraulic drive system, Electric control cabinet, ect.-
Flow Chart
Â
-
Detail Description
(1)Tension type decoiler  |
Functional Configuration |
The worker put coil on the manual decoiler, and tensioning it through spanner.
|
technical parameters |
The maximum load capacity          5 Ton The coil inside diameter           φ508mm Suitable coil width                 1000mm
|
(2) Main machine system
|
Roll forming system  |
-
Roll forming system consists of machine frame, drive disk assembly and cold bending rollers, ect.
-
The machine Section production and then splicing it
-
Cr12 Heat Treatment,roller surfaces polishing, hard plating .
-
Support structure in the form of roller shaft.
-
All motors use dedicated motor, has excellent mechanical properties.
-
Powered by a hydraulic motor system, it has small machine noise, and stable speed rapid prototyping.
|
System for forming after cutting off  |
-
Adopting rolling forming then cut the sheet. No waste here, Cutting knife is made of the Cr12 after quenching.
-
Using combined frame type to cut the machine frame. The characteristics is good maintainability and easy to adjust.
-
Hydraulic stations offer the cutting power.
|
Structural features  |
- Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
-
Cut-off tool:Â Use of high strength wear thicker type mold, it is advantageous to avoid cutting off at deformation.
|
Feeding Table  |
- Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
|
-
Hydraulic system
|
-
Description
|
-
The main valve parts adopt domestic high-quality brand.
-
Oil cylinder and oil pump adopt national standard rod oil cylinder, easy to purchase all over the world.
-
The motor is national standard copper core, universal around the world.
|
- Characteristic
|
-
The hydraulic system after optimization design, compact structure, with beautiful appearance
- Stable performance and good durability.
|
-
Electronic control system
|
-
Description
|
-
The machine used well-known brand of Delta PLC control technology. To realize the automatic machine
-
The system to provide friendly man-machine interface, It can be set batch, workpiece length and number, etc.
- Encoder count, count and length with function.
-
PLCÂ touch screen adopt domestic famous brands.
|
- Characteristic
|
- Adopt touch screen control box through the man-machine interface, convenient operation, good appearance, consistent with the whole equipment.
-
The main components adopt France Schneider, It will stable performance, good reputation, global procurement.
-
Using a number of control technology, automation degree is high.
-
Encoder count, length accurately.
|
Adopting circular gear hob, when changing the specifications of the plate is more convenient and simple. The manual cotter used dedicated screw with C-beam.  To improve the used intensity and the effect. Not easy to fall off.
|
Cangzhou Xindingli Cold Bending Machinery Co., Ltd
Contact person: Angela LeeContact me to get more information
Welcome to contact and visit us, waiting for your cooperation sincerely.
Injection Charger Base Accessories
The design theme of the accessories for the injection charger base is the product design and mold design of the universal charger base, which is designed for the production of injection mold. Plastic parts
The preliminary analysis of the structure shows that the sprue and the sequence type, the structure and the adoption of a two-cavity mold are due to the large area of plastic parts. Due to the structural characteristics of plastic parts, it needs to use inclined sliding traction mechanism. The specific design process is as follows: first, the performance analysis of the plastic injection molding process. This includes analysis of the structural dimensions of the material properties of the plastic parts and molded plastic parts. Second, it is the choice of how to inject a reasonable machine. Choosing the right injection molding machine is the foundation of this design. Again, this is in the form of the mold structure preparation. The form structure of the mold must be calculated and a reasonable choice is based on the dimensions of the structure. The fourth step is to design the pouring system.
The fifth step is such a design in the design and mold parts of the calculation focus. The sixth step is to draw the sliding cover design of the oblique profile and the calculation of the core mechanism.
Injection Charger Base Accessories,Iphone Charger Base,Black Injection Molding,Injection Molding Machine
Timeplex Industrial Limited , https://www.hktimeplex.com