In the past, the use of magnesium alloy die castings was relatively small, and now it is slowly increasing. Because magnesium alloys have the characteristics of low density and strong rigidity, many parts of shells and brackets use magnesium die castings. For example, the fast-developing mobile phones and notebook computers in recent years often use magnesium die casting for the support frame and the back shell. However, compared with aluminum alloy die casting and zinc alloy die casting, the cost of magnesium alloy die-casting will be relatively high.
The melting point of magnesium alloy is relatively low, and it needs effective gas protection during die casting, which is easy to oxidize and burn. Therefore, the professionalism of die casting is relatively strong, and the requirements for die casting personnel are generally relatively high. SCZY has professional and technical personnel for die-casting magnesium alloy products to ensure the quality of the products. Including one-stop services such as precision CNC machining and surface treatment provided later.
Magnesium Die Casting,Magnesium Alloy Die-Cast,Magnesium Alloy Die Casting In Automobile,Magnesium Alloy Die Casting Processing,Magnesium Die Casting Parts Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
"Our commitment to customer satisfaction comes first. It's a simple concept." -SBM
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator:
Â
Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Features :
Â
High intensity. High garden, high power rare earth magnets
Available with flanges to suit square and round chutes
Available with angle deflectors above and between the tubes for heavy contamination
Direct access to magnets in chute
Easily installed and extremely easy to clean
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Application :
Â
Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Working Principle :
Â
When the magnetic separation machine works, after the slurry is injected into the magnetic field, the strong magnetic mineral is adsorbed on the cylinder surface, the weak magnetic and non-magnetic minerals are successively excluded, the strong magnetic minerals adsorbed on the cylinder was taken out of the magnetic field with the rotation of the cylinder. Magnetic mineral particles to the magnetic system with the edge of the cylinder, under the action of the flushing water into the concentrate tank, a non-magnetic mineral particles and the magnetic particles is weak, the pulp flow in the tank to carry, and then discharge from the tailings port.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Technical Parameters:
Â
Â
Model
Roller size
Magnetic intensity on surface mT
Processing ability
Drive power
Roller rotary speed
Weight
(Dia.×Length)
mm
Geometric center
average
highest
T/h
m3/h
Kw
Kg
CTS(N,B)-46
400×600
Â
130
160
1~3
5
1.1
45
600
CTS(N,B)-66
600×600
Â
145
170
5~10
16
1.1
40
750
CTS(N,B)-69
600×900
Â
145
170
8~15
24
1.1
40
830
CTS(N,B)-612
600×1200
Â
145
170
10~20
32
2.2
40
990
CTS(N,B)-618
600×1800
Â
145
170
15~30
48
2.2
40
1330
CTS(N,B)-712
750×1200
120
155
180
15~30
48
3
35
1500
CTS(N,B)-718
750×1800
120
155
180
20~45
72
3
35
2100
CTS(N,B)-918
900×1800
148
165
190
25~55
90
4
28
2900
CTS(N,B)-924
900×2400
148
165
190
35~70
110
4
28
3500
CTS(N,B)-1018
1050×1800
148
165
190
40~75
120
5.5
22
4000
CTS(N,B)-1021
1050×2100
148
165
190
45~88
140
5.5
22
4500
CTS(N,B)-1021
1050×2100
160
240
280
45~88
140
5.5
22
4500
CTS(N,B)-1024
1050×2400
148
165
190
52~100
160
5.5
22
5000
CTS(N,B)-1024
1050×2400
160
240
280
52~100
160
5.5
22
5000
CTS(N,B)-1030
1050×3000
160
240
280
65~125
200
7.5
22
6200
CTS(N,B)-1218
1200×1800
148
165
190
47~90
140
5.5
19
5800
CTS(N,B)-1218
1200×1800
160
240
280
47~90
140
5.5
19
5800
CTS(N,B)-1224
1200×2400
148
165
190
82~120
192
7.5
19
6200
CTS(N,B)-1224
1200×2400
160
240
300
82~120
192
7.5
19
6200
CTS(N,B)-1230
1200×3000
148
165
190
80~150
240
7.5
19
7200
CTS(N,B)-1230
1200×3000
160
240
280
80~150
240
7.5
19
7200
CTS(N,B)-1530
1500×3000
180
240
300
90~170
270
11
14
8100
CTS(N,B)-1540
1500×4000
180
240
300
115~220
350
11
14
9300
Large Capacity Magnetic Separator Price (CTS(N,B)Â Related Knowledge :
Â
Models and sizes
Â
The range of wet magnetic separators is composed of the series WS1200 with drum diameters of 1200 mm with a magnetically effective drum length up to 3678 mm in increments of 613 mm. The WS1200 series includes concurrent, counter-current and counterrotation tank designs.
The wet magnetic separators are primarily used for cobbing, roughing, cleaning and finishing purposes.
Concurrent and counter-current separators are designed for both single and multistage arrangements.
Â
Magnetic drum assembly
Â
The heart of the magnetic separator is the magnetic drum assembly which is composed of a stationary magnetic array mounted inside of a non-magnetic drum. During operation, the drum revolves around the magnetic assembly thereby transporting magnetically attracted material on the drum to the area designated for discharge.
The drum heads are normally cast from nonmagnetic aluminium alloy and the drum shell is manufactured from non-magnetic stainless steel. Drum shells are normally rubber or stainless steel covered against abrasion.
Â
Magnetic systems
Â
The magnetic system has alternating polarity and is comprised of six main poles and intermediate cross poles for maximising the magnetic flux. Other systems for special applications are also avalable
Â
Â
Project Case
Â
Gold Mining Equipment- Gold CIL PlantÂ
Â
SBM offers turnkey solutions for 300tpd Gold Mining Equipment- Gold CIL Plant. We are one of the leading project suppliers for 300tpd Gold Mining Equipment- Gold CIL Plant and we work closely with our customers to fulfill their specific needs for a customized packaged solution. Specialized in the fabrication of these machines for18 years and this enables us to be in a leading position in the field of 300tpd Gold Mining Equipment- Gold CIL Plant .
Â
We have been in 300tpd Gold Mining Equipment- Gold CIL Plant for more than18 years. We have established a great deal of experience in recent years developing Small Gold Mining Equipment .Our 300tpd Gold Mining Equipment- Gold CIL Plant line mainly include following equipment:
Feeder
Jaw crusher, cone crusher
Vibrating screen
Belt conveyors
Ball mill
Spiral classifer
Hydrocyclone
Thickener
Leaching Tanks
Electrowinning and desorption device
Gold smelting furnace
Our 300tpd Gold Mining Equipment- Gold CIL Plant are extensively used in metallurgy, mine, chemistry, coal, building material and grinding material industries.
300tpd Gold Mining Equipment- Gold CIL Plant turnkey project contents:
1. Project engineering design
The project engineering design includes the whole beneficiation flowsheet from the beginning of raw ore plie in the plant to the tailing transportation, general layout drawing, transportation in the plant, electricity power, automation, water supply and drainage, civil construction, foundation, technical economy and so on. The design drawings and documents will be sent to the buyers after the design was finished. This design only includes the gravity separation plant inside. The roads out of plant, the pipeline from the water source area to the plant, outside power system to transformer in the plant are not included.
2.Equipment manufacture and supply
We can supply the whole line of gold leaching plant, including:
a. crushing system
b. grinding and classification system
c. leaching system
d. desorption and electrowinning device
e. gold smelting system
Seller confirms the requested mechanical equipments in the whole plant during the project engineering design. After offer the detailed equipments list to the buyer for the confirmation, the seller produces the main equipments and purchases the auxiliary equipments.
3. Package and delivery
Seller makes a classification package plan for all the kinds of equipments and materials. Transport the goods Sudan port.
4. Installation
(1)Manufacturing and installation of process metal structures of the plant:
Including steel hopper, steel chute, steel platforms for operation and steel support; excluding civil engineering, steel structure platform and steel structure work of the workshop.
(2)Manufacturing and installation of process pipelines of the plant:
Mainly including pipelines of slurry, water, gas and reagent, valves, elbows, flanges and fasteners; water pipelines excluding parts from water source to the plant, tailings pipelines excluding parts from exit of tailings pipe to tailings dam.
(3)Manufacturing and Installation of distribution boards and operation control cabinets, laying of electric wire and cable, lighting fixtures.
Â
Â
Clients Comments
Â
"We have decided to increase the purchasing of SBM Machinery as it chases what it says is highly efficient and environmental friendly." - Client From Zimbabwe
Â
"Cooperating with SBM brings us more opportunities to maximize our production. Especially its coal crushers and coal mills just match our plant." - Mr. Bruce Munro, Chief Executive Mining - Client From Australia
Â
"Dealing with SBM Machinery especially magnetic separator trading is the best choice since i started importing & exporting of mining equipment." - Clients From South Africa
Â
"The company is worth a win-win business of magnetic separator after i was touched by their service." - Clients From India
Â
ABOUT US
SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.
Inquiry Service
Your email address and telephone will not be shared or published!
Please fill in your need products and your message and do not forget mail and/or phone if you like to be contacted.
we are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,
1.what is the raw material do you want to process?Â
2.what is the capacity per hour do you need?
3.what is the raw material input size?Â
4.what is the output size of your product?
Â
Request for Quotation
Â
Of course, free live-chat is available and you can get help immediately.Or you can send me email .
You can get the price list and a SBM representative will contact you within one business day.Â
I hope you can tell me these details,i will give you the best quotation ASAP ,thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!
"Our commitment to customer satisfaction comes first. It's a simple concept." -SBM
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator:
Â
Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Features :
Â
High intensity. High garden, high power rare earth magnets
Available with flanges to suit square and round chutes
Available with angle deflectors above and between the tubes for heavy contamination
Direct access to magnets in chute
Easily installed and extremely easy to clean
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Application :
Â
Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Working Principle :
Â
When the magnetic separation machine works, after the slurry is injected into the magnetic field, the strong magnetic mineral is adsorbed on the cylinder surface, the weak magnetic and non-magnetic minerals are successively excluded, the strong magnetic minerals adsorbed on the cylinder was taken out of the magnetic field with the rotation of the cylinder. Magnetic mineral particles to the magnetic system with the edge of the cylinder, under the action of the flushing water into the concentrate tank, a non-magnetic mineral particles and the magnetic particles is weak, the pulp flow in the tank to carry, and then discharge from the tailings port.
Â
Â
Â
High Quality Wet Magnetic Separator , Dry Magnetic Separator Technical Parameters:
Â
Â
Model
Roller size
Magnetic intensity on surface mT
Processing ability
Drive power
Roller rotary speed
Weight
(Dia.×Length)
mm
Geometric center
average
highest
T/h
m3/h
Kw
Kg
CTS(N,B)-46
400×600
Â
130
160
1~3
5
1.1
45
600
CTS(N,B)-66
600×600
Â
145
170
5~10
16
1.1
40
750
CTS(N,B)-69
600×900
Â
145
170
8~15
24
1.1
40
830
CTS(N,B)-612
600×1200
Â
145
170
10~20
32
2.2
40
990
CTS(N,B)-618
600×1800
Â
145
170
15~30
48
2.2
40
1330
CTS(N,B)-712
750×1200
120
155
180
15~30
48
3
35
1500
CTS(N,B)-718
750×1800
120
155
180
20~45
72
3
35
2100
CTS(N,B)-918
900×1800
148
165
190
25~55
90
4
28
2900
CTS(N,B)-924
900×2400
148
165
190
35~70
110
4
28
3500
CTS(N,B)-1018
1050×1800
148
165
190
40~75
120
5.5
22
4000
CTS(N,B)-1021
1050×2100
148
165
190
45~88
140
5.5
22
4500
CTS(N,B)-1021
1050×2100
160
240
280
45~88
140
5.5
22
4500
CTS(N,B)-1024
1050×2400
148
165
190
52~100
160
5.5
22
5000
CTS(N,B)-1024
1050×2400
160
240
280
52~100
160
5.5
22
5000
CTS(N,B)-1030
1050×3000
160
240
280
65~125
200
7.5
22
6200
CTS(N,B)-1218
1200×1800
148
165
190
47~90
140
5.5
19
5800
CTS(N,B)-1218
1200×1800
160
240
280
47~90
140
5.5
19
5800
CTS(N,B)-1224
1200×2400
148
165
190
82~120
192
7.5
19
6200
CTS(N,B)-1224
1200×2400
160
240
300
82~120
192
7.5
19
6200
CTS(N,B)-1230
1200×3000
148
165
190
80~150
240
7.5
19
7200
CTS(N,B)-1230
1200×3000
160
240
280
80~150
240
7.5
19
7200
CTS(N,B)-1530
1500×3000
180
240
300
90~170
270
11
14
8100
CTS(N,B)-1540
1500×4000
180
240
300
115~220
350
11
14
9300
Large Capacity Magnetic Separator Price (CTS(N,B)Â Related Knowledge :
Â
Models and sizes
Â
The range of wet magnetic separators is composed of the series WS1200 with drum diameters of 1200 mm with a magnetically effective drum length up to 3678 mm in increments of 613 mm. The WS1200 series includes concurrent, counter-current and counterrotation tank designs.
The wet magnetic separators are primarily used for cobbing, roughing, cleaning and finishing purposes.
Concurrent and counter-current separators are designed for both single and multistage arrangements.
Â
Magnetic drum assembly
Â
The heart of the magnetic separator is the magnetic drum assembly which is composed of a stationary magnetic array mounted inside of a non-magnetic drum. During operation, the drum revolves around the magnetic assembly thereby transporting magnetically attracted material on the drum to the area designated for discharge.
The drum heads are normally cast from nonmagnetic aluminium alloy and the drum shell is manufactured from non-magnetic stainless steel. Drum shells are normally rubber or stainless steel covered against abrasion.
Â
Magnetic systems
Â
The magnetic system has alternating polarity and is comprised of six main poles and intermediate cross poles for maximising the magnetic flux. Other systems for special applications are also avalable
Â
Â
Project Case
Â
Gold Mining Equipment- Gold CIL PlantÂ
Â
SBM offers turnkey solutions for 300tpd Gold Mining Equipment- Gold CIL Plant. We are one of the leading project suppliers for 300tpd Gold Mining Equipment- Gold CIL Plant and we work closely with our customers to fulfill their specific needs for a customized packaged solution. Specialized in the fabrication of these machines for18 years and this enables us to be in a leading position in the field of 300tpd Gold Mining Equipment- Gold CIL Plant .
Â
We have been in 300tpd Gold Mining Equipment- Gold CIL Plant for more than18 years. We have established a great deal of experience in recent years developing Small Gold Mining Equipment .Our 300tpd Gold Mining Equipment- Gold CIL Plant line mainly include following equipment:
Feeder
Jaw crusher, cone crusher
Vibrating screen
Belt conveyors
Ball mill
Spiral classifer
Hydrocyclone
Thickener
Leaching Tanks
Electrowinning and desorption device
Gold smelting furnace
Our 300tpd Gold Mining Equipment- Gold CIL Plant are extensively used in metallurgy, mine, chemistry, coal, building material and grinding material industries.
300tpd Gold Mining Equipment- Gold CIL Plant turnkey project contents:
1. Project engineering design
The project engineering design includes the whole beneficiation flowsheet from the beginning of raw ore plie in the plant to the tailing transportation, general layout drawing, transportation in the plant, electricity power, automation, water supply and drainage, civil construction, foundation, technical economy and so on. The design drawings and documents will be sent to the buyers after the design was finished. This design only includes the gravity separation plant inside. The roads out of plant, the pipeline from the water source area to the plant, outside power system to transformer in the plant are not included.
2.Equipment manufacture and supply
We can supply the whole line of gold leaching plant, including:
a. crushing system
b. grinding and classification system
c. leaching system
d. desorption and electrowinning device
e. gold smelting system
Seller confirms the requested mechanical equipments in the whole plant during the project engineering design. After offer the detailed equipments list to the buyer for the confirmation, the seller produces the main equipments and purchases the auxiliary equipments.
3. Package and delivery
Seller makes a classification package plan for all the kinds of equipments and materials. Transport the goods Sudan port.
4. Installation
(1)Manufacturing and installation of process metal structures of the plant:
Including steel hopper, steel chute, steel platforms for operation and steel support; excluding civil engineering, steel structure platform and steel structure work of the workshop.
(2)Manufacturing and installation of process pipelines of the plant:
Mainly including pipelines of slurry, water, gas and reagent, valves, elbows, flanges and fasteners; water pipelines excluding parts from water source to the plant, tailings pipelines excluding parts from exit of tailings pipe to tailings dam.
(3)Manufacturing and Installation of distribution boards and operation control cabinets, laying of electric wire and cable, lighting fixtures.
Â
Â
Clients Comments
Â
"We have decided to increase the purchasing of SBM Machinery as it chases what it says is highly efficient and environmental friendly." - Client From Zimbabwe
Â
"Cooperating with SBM brings us more opportunities to maximize our production. Especially its coal crushers and coal mills just match our plant." - Mr. Bruce Munro, Chief Executive Mining - Client From Australia
Â
"Dealing with SBM Machinery especially magnetic separator trading is the best choice since i started importing & exporting of mining equipment." - Clients From South Africa
Â
"The company is worth a win-win business of magnetic separator after i was touched by their service." - Clients From India
Â
ABOUT US
SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.
Inquiry Service
Your email address and telephone will not be shared or published!
Please fill in your need products and your message and do not forget mail and/or phone if you like to be contacted.
we are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,
1.what is the raw material do you want to process?Â
2.what is the capacity per hour do you need?
3.what is the raw material input size?Â
4.what is the output size of your product?
Â
Request for Quotation
Â
Of course, free live-chat is available and you can get help immediately.Or you can send me email .
You can get the price list and a SBM representative will contact you within one business day.Â
I hope you can tell me these details,i will give you the best quotation ASAP ,thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!
Model NO.: CTS(N, B)-66
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
The Machines Classification: Wet Magnetic Separator
After Sales Service: The Whole Time
Spare Parts Supply: Will Supply Any Time
Application: Mining,Quarry,Chemical Industry and Construction
Test&Installation: Professional Engineer Assigned
Delivery Detail: 30 Days
Other Certification: CE
Other Color: Yellow Iron Grey
Other Warranty: 12 Months
Details: More Information Please Send Me
Trademark: SBM
Transport Package: Export Standard
Specification: ISO9001: 2008
Origin: Shanghai, China
HS Code: 73161506
Model NO.: CTS(N, B)-66
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
The Machines Classification: Wet Magnetic Separator
After Sales Service: The Whole Time
Spare Parts Supply: Will Supply Any Time
Application: Mining,Quarry,Chemical Industry and Construction
Test&Installation: Professional Engineer Assigned
Delivery Detail: 30 Days
Other Certification: CE
Other Color: Yellow Iron Grey
Other Warranty: 12 Months
Details: More Information Please Send Me
Trademark: SBM
Transport Package: Export Standard
Specification: ISO9001: 2008
Origin: Shanghai, China
HS Code: 73161506