Knock Sensor,Knock Sensor For Gm,Suspension Parts Sensor,Knock Sensor Audi Zhejiang Kefeng Sensor Co., Ltd. , https://www.kefengsensor.com
The first step of the gas alarm installed by Chongqing Xuou Company is:
1. The horizontal distance between the installation location and the gas stove, gas water heater and other leakage sources is between 1~2m. 2. Check the natural gas and artificial gas; install the height distance ceiling no more than 30CM
3. Detection of liquefied petroleum gas; installation height from the ground does not exceed 30CM
Step 2 Remove the mounting bracket on the back of the household gas alarm system of Chongqing Xuou Co., Ltd. Step 3 Secure the gas alarm mounting bracket sold by Chongqing Xuou Company to the appropriate position on the wall, mark the position of the mounting hole, and drill on the wall. Holes are fixed with screws; due to the light weight of household gas alarms, strong double-sided tape can also be used to secure the mounting brackets if there is no drilling tool.
The fourth step is to install the gas alarm mounting bracket sold by Chongqing Xuou Co., Ltd. into the card slot of the household gas alarm, complete the installation, and connect the power cord and the gas emergency cutoff solenoid valve connection cable (if gas solenoid valve is installed), complete installation.
Precautions
Do not install in high-temperature, high-humidity environment, so as not to affect the detection accuracy of gas alarm, please purchase regular factory production, reliable quality gas alarm, to ensure safety in case of failure, please contact professional maintenance, do not disassemble fuel gas Alarm
China Chongqing gas, natural gas, gas alarm installation steps are as follows: