EvoTec Three Phase Synchronous Generator including Lower Voltage Three Phase Synchronous Generator, Electric Power Generator ,60Hz Industrial Alternator, 16Kw Synchronous Generator .Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.
Ambient Temperature: 40
Lower Voltage Three Phase Synchronous Generator
Lower Voltage Three Phase Synchronous Generator Electric Power Generator,Lower Voltage Three Phase Synchronous Generator,60Hz Industrial Alternator,16Kw Synchronous Generator EvoTec Power Generation Co., Ltd , https://www.evotecgen.com
Green manufacturing quietly rises
As a domestic construction machinery industry, from the production to the final formation of sales, energy conservation has not attracted enough attention. Some advanced foreign construction machinery manufacturers have long noticed this, they provide users with almost "top-to-bottom" service. The basis of these services is the mechanical performance. Fortunately, at the beginning of 2006, the voice of environmental-friendly machinery has begun to ring widely.
A source from the Ministry of Commerce explained in detail the energy-saving approach of the machinery industry: In addition to raw materials and components, the production costs of construction machinery are mainly the consumption of electricity, water and gas, and labor costs in the production process. The goals of energy saving and consumption reduction are correspondingly obvious. It is to reduce the consumption of electricity, water, and gas in the production process, and to use by-products such as generated heat.
Judging from the current energy-saving technologies and products, the domestic market is relatively mature in the above aspects. In addition to power saving through frequency conversion technology, advanced energy-saving technologies are used to optimize the power system. On the one hand, water treatment uses recycling as a means, and on the other hand, it can consider the use of special effects such as water warming, ice cold, etc. according to the temperature of the water. The “gas†generated during the production process is recycled on the one hand so that it can be circulated and burned. On the other hand, the purified part can be used in the heating system, eliminating the need for electricity in this part.
On the other hand, Zhu Shengdi, vice president of the China Machinery Industry Federation, stated at a press conference that the main reason for the reduction of energy consumption in the machinery industry is the implementation of green manufacturing.
Green manufacturing, which is in the initial stage, proposes a modern manufacturing model that comprehensively considers environmental factors and resource utilization efficiency. Through the green design, green materials, green technology, green production, green packaging, green recycling, etc., the mechanical industry has the least impact on the environment and the highest resource utilization rate. The biggest difference between traditional manufacturing and green manufacturing is that traditional manufacturing is only based on market information design and production of products, while the rest are less considered. Green manufacturing produces green products through the green production process. After the products are used, they are recycled through green treatment. At the same time, the utilization efficiency of raw materials and energy can reach the highest. The ISO14000 international environmental protection standard that has already been promulgated has provided a broader application space for green manufacturing.
Zhu Chendi believes that promoting green manufacturing should do a good job in two tasks. The first is to continue to eliminate high energy consumption and backward mechanical equipment. To force an update, mandatory replacement. But also to limit the time, take decisive measures. The second is to improve energy efficiency standards. It should be based on the original standard, increase the use of energy standards, energy efficiency standards, reach the standard, can not be sold.
However, the above is only part of the energy-saving measures. From the point of view of the entire industry, construction machinery has to be transformed and not energy-efficient. Instead of being passively changed, it is better to develop green manufacturing in response to changes. What is required by the machinery industry now is that the machinery industry enterprises that are "energy-saving" and are in good condition will eventually be eliminated from the market.
The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)
Special Features:
On August 31st, the "Decision of the State Council on Strengthening Energy Conservation Work" was formally issued, and the "Decision" will have a strong guiding role in accelerating the industrial restructuring of the machinery industry. The relevant experts analyzed that the "Decision" put forward a higher level requirement for the development of China's machinery industry, low-tech machinery manufacturing will be further controlled, and the review of project-related projects will be more stringent. On the other hand, mechanical products with energy-saving technologies will be quickly brought to market. Prior to this, the energy saving situation in the entire machinery industry market was not optimistic.