Bronze Components consists of a variety of alloys: Cu, Zn, Sn, Mn, Al, has a high corrosion resistance and wear resistance. Our CNC machining bronze has the following models: C220, C510, C630, C863, C936. Bronze Components in the sea water, salt water immersion has a very good tolerance. Bronze Components used in the ship, automobile, consumer and industrial sectors. Bronze Components have good electrical conductivity, easy to heat, to ensure safety at the same time with a strong anti-fatigue. Bronze Components has excellent mechanical machining performance and chip performance, can quickly shorten the parts machining time.
Bronze Components Machining Bronze Components, Precision Turned Bronze Parts, Phosphor Bronze Parts, CNC Machining Bronze Parts Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD , https://www.bldcncmachining.com
Main Features
-Multifunction: MIG/MAG, P-MIG/MAG, Double P-MIG, MMA, TIG, P-TIG, TIG Spot welding, Carbon arc gouging.
-IGBT module type, advanced all digital soft-switch technology, good dynamic characteristics,
-High reliability, Energy saving.
-Fully digital waveform control, steady performance, good consistency.
-DSP control wire feeder adopts the digital encoder and dual drive, feeding wire more accurately and smoothly.
-Special 4T modes which are suitable for aluminum welding.
-Suitable for different kinds of materials such as steel, stainless steel, aluminum, zinc coated steel, cooper and so on.
-Pulse MIG-350H equipped with a transport trolley.
IGBT DC TIG/MIG/Manuel Inverter Welder Specifications
Model
P MIG 350
P MIG 350H
Rated input voltage (V)
3PH AC380V
3PH AC380V
Rated input capacity (KVA)
14.4
14.4
Rated input current (A)
25
25
Rated duty cycle(%) (40ºC,10min)
60%
350A
350A
100%
271A
271A
Output current adjustment (A)
25-350
25-350
Output voltage adjustment (V)
14-40
14-40
No-load voltage (V)
96
96
Efficiency (%)
≥89
≥89
Power factor
≥0.87
≥0.87
Flow rate of shielded gas (L/min)
15-20
15-20
Diameter of welding wire(mm)
Φ0.8, Φ1.0, Φ 1.2,Φ 1.6
Φ0.8, Φ1.0, Φ 1.2,Φ 1.6
Insulation of main transformer
H
H
Insulation of output reactor
B
B
Net weight (KG)
42
120
Dimension of machine (mm)
650×340×590
1080×700×1450
earth clamp*1 pcs, cable joint*3pcs, grounding cable*3meters, control cable*5meters, pressure regulator*1pcs, water cooled MIG torch*1pcs, water tank*1set, wire feeder*1set
IGBT DC TIG/MIG/Manuel Inverter Welder Selection Guide
Material
Sheet thickness   (mm)
Stick diameter    (mm)
Current range(A)
Model
 Carbon steel
Stainless steel
Low alloy steel
≥0.8
0.8/1.0
50-200
MIG-200
≥0.8
0.8/1.0
60-250
MIG-250
≥0.8
1.0/1.2
60-350
MIG-350
≥0.8
1.0/1.2/1.6
60-500
MIG-500
 Carbon steel
Stainless steel
Low alloy steel
Aluminum
≥0.8
 0.8/1.0
 30-185A
 MIG-200P
≥0.8
2.5/3.2/4.0/5.0
25-350
MIG-350H
≥0.8
5.0/6.0/8.0
25-500
MIG-500H
Package &Â Shipping
 Packaging Details:  Carton package with inside plastic bag and foam / wooden packing/Packing according to customers require.
Delivery: within (25-30) days after confirmation of the deposit.
Company Information
Zhejiang ST welding machine have a number of inventions and patents, cover IGBT module, single-tube IGBT, MOSFET three series of welding and cutting equipments. Our inverter Pulse MIG/MAG welding machine, CO2 Gas Shielded Welding Machine, DC Air Plasma Cutter and Auto Submerged Arc Welding Machine are widely accepted across the globe.
Continuous innovation, focus on the quality, integrity managements and common development are the pursuits of Zhongliang Group. To provide customers with high quality, reliable products and services are the eternal principle of every staff in Zhongliang.
Our products are widely used in chemical, construction, light industry, machinery manufacturing, shipbuilding, metallurgy, automobile manufacturing, aerospace and other professional fields, satisfying all kinds of demands from customers.
FAQÂ
Q: Are you a factory or trading company?
A: We are a factory; our main products are welding machine, and voltage regulator/transformer.
Q: How many days for mass producing?
A: It will cost 30 days after confirm the order.
Q: Can you do OEM?
A: Yes, we can do OEM/ODM.
Q: Will you provide spare parts?
A: We will provide 2% free spare parts for our customers if the order no less than 20GP.
(Including pcbs with components, additional MOSFET/IGBT tube and components)
Q: What's your guarantee period?
A: We offer 1 year warranty for our welding machine.
 
Contact:
Web:http://www.shunbian.cn/english/
Mob: +86-18057763376
Â
Address:Qiligang Industrial Park,Yueqing,Zhejiang,China. 325604
Â
IGBT DC TIG/MIG/Manuel Inverter Welder PÂ MIG-350
Main Features
-Multifunction: MIG/MAG, P-MIG/MAG, Double P-MIG, MMA, TIG, P-TIG, TIG Spot welding, Carbon arc gouging.
-IGBT module type, advanced all digital soft-switch technology, good dynamic characteristics,
-High reliability, Energy saving.
-Fully digital waveform control, steady performance, good consistency.
-DSP control wire feeder adopts the digital encoder and dual drive, feeding wire more accurately and smoothly.
-Special 4T modes which are suitable for aluminum welding.
-Suitable for different kinds of materials such as steel, stainless steel, aluminum, zinc coated steel, cooper and so on.
-Pulse MIG-350H equipped with a transport trolley.
IGBT DC TIG/MIG/Manuel Inverter Welder Specifications
Model
P MIG 350
P MIG 350H
Rated input voltage (V)
3PH AC380V
3PH AC380V
Rated input capacity (KVA)
14.4
14.4
Rated input current (A)
25
25
Rated duty cycle(%) (40ºC,10min)
60%
350A
350A
100%
271A
271A
Output current adjustment (A)
25-350
25-350
Output voltage adjustment (V)
14-40
14-40
No-load voltage (V)
96
96
Efficiency (%)
≥89
≥89
Power factor
≥0.87
≥0.87
Flow rate of shielded gas (L/min)
15-20
15-20
Diameter of welding wire(mm)
Φ0.8, Φ1.0, Φ 1.2,Φ 1.6
Φ0.8, Φ1.0, Φ 1.2,Φ 1.6
Insulation of main transformer
H
H
Insulation of output reactor
B
B
Net weight (KG)
42
120
Dimension of machine (mm)
650×340×590
1080×700×1450
earth clamp*1 pcs, cable joint*3pcs, grounding cable*3meters, control cable*5meters, pressure regulator*1pcs, water cooled MIG torch*1pcs, water tank*1set, wire feeder*1set
IGBT DC TIG/MIG/Manuel Inverter Welder Selection Guide
Material
Sheet thickness   (mm)
Stick diameter    (mm)
Current range(A)
Model
 Carbon steel
Stainless steel
Low alloy steel
≥0.8
0.8/1.0
50-200
MIG-200
≥0.8
0.8/1.0
60-250
MIG-250
≥0.8
1.0/1.2
60-350
MIG-350
≥0.8
1.0/1.2/1.6
60-500
MIG-500
 Carbon steel
Stainless steel
Low alloy steel
Aluminum
≥0.8
 0.8/1.0
 30-185A
 MIG-200P
≥0.8
2.5/3.2/4.0/5.0
25-350
MIG-350H
≥0.8
5.0/6.0/8.0
25-500
MIG-500H
Package &Â Shipping
 Packaging Details:  Carton package with inside plastic bag and foam / wooden packing/Packing according to customers require.
Delivery: within (25-30) days after confirmation of the deposit.
Company Information
Zhejiang ST welding machine have a number of inventions and patents, cover IGBT module, single-tube IGBT, MOSFET three series of welding and cutting equipments. Our inverter Pulse MIG/MAG welding machine, CO2 Gas Shielded Welding Machine, DC Air Plasma Cutter and Auto Submerged Arc Welding Machine are widely accepted across the globe.
Continuous innovation, focus on the quality, integrity managements and common development are the pursuits of Zhongliang Group. To provide customers with high quality, reliable products and services are the eternal principle of every staff in Zhongliang.
Our products are widely used in chemical, construction, light industry, machinery manufacturing, shipbuilding, metallurgy, automobile manufacturing, aerospace and other professional fields, satisfying all kinds of demands from customers.
FAQÂ
Q: Are you a factory or trading company?
A: We are a factory; our main products are welding machine, and voltage regulator/transformer.
Q: How many days for mass producing?
A: It will cost 30 days after confirm the order.
Q: Can you do OEM?
A: Yes, we can do OEM/ODM.
Q: Will you provide spare parts?
A: We will provide 2% free spare parts for our customers if the order no less than 20GP.
(Including pcbs with components, additional MOSFET/IGBT tube and components)
Q: What's your guarantee period?
A: We offer 1 year warranty for our welding machine.
Â
Contact:
Web:http://www.shunbian.cn/english/
Mob: +86-18057763376
Â
Address:Qiligang Industrial Park,Yueqing,Zhejiang,China. 325604
Â
Model NO.: P MIG-350 Welder
Efficiency: 89%
Power Factor: 0.87
Insulation of Main Transformer: H
Insulation of Output Reactor: B
Name: TIG/MIG/Manuel Inverter Welder
Color: Black or as Required
Certificate: Ce
OEM/ODM: Available
Application: TIG MIG Manuel Welding
Trademark: ST
Transport Package: Carton
Specification: 650*340*590
Origin: China
HS Code: 8515319900
Model NO.: P MIG-350 Welder
Efficiency: 89%
Power Factor: 0.87
Insulation of Main Transformer: H
Insulation of Output Reactor: B
Name: TIG/MIG/Manuel Inverter Welder
Color: Black or as Required
Certificate: Ce
OEM/ODM: Available
Application: TIG MIG Manuel Welding
Trademark: ST
Transport Package: Carton
Specification: 650*340*590
Origin: China
HS Code: 8515319900
IGBT DC TIG/MIG/Manuel Inverter Welder PÂ MIG-350Â
IGBT DC TIG/MIG/Manuel Inverter Welder Accessories:Â
IGBT DC TIG/MIG/Manuel Inverter Welder Accessories: