Imported U.S. Portable Gas Chromatograph Small-size, low-heat-capacity capillary gas chromatography enables faster detection of compounds and better separation; microcyclic ion trap mass spectrometry offers a wide range of mass numbers, superior qualitative and quantitative functions, and seismic performance, providing high sensitivity and high selectivity. Analytical, and suitable for the analysis of most compounds, all these features are embodied in this portable, stand-alone portable GC-MS.

Key features: Portability: Light weight (14.5kg, with battery), Small size (38.1 cm x 39.4 cm x 22.9 cm), Easy to carry; Quickness: No more than 5 min per sample test time; Ease of use: Pass through the machine The automated analysis and retrieval of the library can automatically complete deconvolution (identification and analysis of overlapping peaks) analysis and qualitative and quantitative detection analysis of the target compound.

Reliability: Really durable design, with a reliable vacuum system and seismic package, working in harsh conditions in the field Technical parameters: System size: 38.1 cm x 39.4 cm x 22.9 cm Weight: 14.5 kg, with battery Applicable temperature: 5 -40°C (vent closed), up to 45°C (open vent)

Applicable humidity: no condensation state up to 100% RH power supply: lithium ion battery, AC converter (100-120V/220-240V, 50/60Hz)

Sample introduction method: Handheld gas sampler CUSTODIONTM-NT, Solid phase microextraction SPME, Carrier gas: High-purity helium Operator interface: Color touch screen and panel buttons Control operation software: CHROMION Analysis software Communication method: Ethernet battery: Rechargeable Lithium battery, continuous working for about 3 hours Helium bottle: 100-150 analysis display screen: 5.7" color touch screen data system: Windows CE operating system detection limit: PPB to PPM power: average power ~60W (peak power ~120W)

Storage: External SD card, standard and micro USB interface Low Thermal Mass LTM GCLTM columns: MXT-5, 5 mx 0.1 mm x 0.4 μm (standard)

Temperature: 40°C to 300°C Heating rate: up to 2.5°C/s Septum purge: 5 mL/min Split ratio: split injection (split ratio: 30:1, 150:1, 200:1) or Splitless Ion Trap Mass Spectrometry TMS Mass Analyzer: Annular Ion Trap Mass Range: 43-500 m/z Ionization Mode: Internal Electron Impact Detector: Electron Multiplier Vacuum: Double Vacuum System: Diaphragm Pump and Turbomolecular Pump, Normal working pressure: 10-3-10-4 Torr Resolution: <1 amu Spectral target compound analysis: According to the retention time and characteristic ions of the target compound, it is automatically searched, and it has deconvolution function to easily complete the qualitative and quantitative analysis!

Industry Applications: Environmental Monitoring and Dangerous Goods Monitoring, Food and Fragrance & Fragrance, Criminal Investigation Science and Pharmaceutical Health, Chemical Industry and Petrochemical Industry, Military Security.

Home Appliance Injection Mould

Home Appliance Plastic Molding refers to washing machine control anel plastic mould, washing machine tub mould and its plastic accessories, air condition frame Plastic Injection Mould and its plastic accessories, ice box or refrigerator plastic injection mould and its plastic accessories, and so on.


Mould Steel: 2738HH, NAK80, 738, 2344, S136, SDK61, P20, PX5 etc.

Mould Life: 50~100 shots
Material: PP
Cavity: 1*1
Applicable range: Home appliance
Lead Time: 35-45 days
Hot runner: (according to the customer's request and product style)
Standard part: PUNCH, MISUMI

First trial equipment: 380T Injection Machine( moreover we also have 90-700T, 750-1300T Injection Machine. There are robots for each 90-380T Injection Machine to meet the customer's bulk production requirement.


Washing machine plastic control panel injection mould


The first mould tryout success rate is above 90%


Quotation: Provide quotation in 24 hours after received the customer's drawing.
The profile: 2D/3D drawing or samples
Manager: Concentrate on project tracking and after service
Engineer: 30-50 excellent engineers, who have many years experience and English communicating well.
The purchase department use EPR system to make sure buying materials in time.
70-130 experienced workers can meet your request of batch production.
Quality department: 15 members quality control workers, testing the mould and parts by CMM and projector.

Shipping incoterms: FOB/CIF/DDU by sea shipping or air shipping

Washing machine control rack plastic mould


Washing machine plastic top panel mould


If you have any doubts about plastic washing machine control panel mould, please don't hesitate to contact us at any time, we are very pleased to give you response in time, warmly welcome to visit our company, we are looking forward to hearing from you, thank you very much.


Home Appliance Injection Mould,Home Appliance Mould,LED Lighting Plastic Injection Mould,Refrigerator Plastic Injection Mould

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com