Japan announced recently that it plans to concentrate on developing next-generation high-performance mold 3D printers in five years. By then, the mold manufacturing speed will be increased to 10 times the current, to meet the aerospace equipment, medical equipment and other industries on the special castings needs. It is reported that Japan's Ministry of Economic Development plans to contribute 3 billion yen, led by the Industrial Technology Research Institute, Qunrong Chemical Industry, Kimura Foundry, CMET, KOIWAI, Komatsu Production, Nissan Motor, Waseda University, During the year, a high-performance mold 3D printer with 80% lower cost and 10 times faster manufacturing speed than current mold making facilities was manufactured. The design of the next generation of mold 3D printer will use repeated, high-speed injection of special glue to fix sand, in a short period of time can form a complex shape of the mold. (Guangdong Plastic Exchange) In drying process, heat medium, such as steam, hot water or thermal oil, is connected to the drying shelf which transfers heat to wet material. Under vacuum condition, boiling point of moisture is much lower. So the moisture can be evaporated under low temperature. The vacuum pump constantly sucks out the evaporated moisture to speed the drying process. Vacuum pump, tubular condenser and buffer tank are equipped to recover the evaporated moisture. Vacuum Drying Oven,Static Drying Machine,Fruit Vacuum Dryer,Vegetable Vacuum Dryer Changzhou Bole Tech Co.,Ltd , https://www.boledrying.com
3D printer