Marine oil separator modular is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.It is divided into 2phase solid-liquid separator and oi-water-impurity 3phase separator.They are workable in land and ship,we have the CCS certificate to certify its function and usage. There are different discharge types of the oils,manually,partial,fully discharged,variable discharge etc which depends on the different materials.commonly,we define the capacity as density of 0#  diesel oil ,and we have a chart to help you find out the exact processing capacity of your needs. We are not only provide the single oil separator,but also the whole unit containing the pumps,valves,heats,pipes and so on.Â
  Advantages
1. Overload over heat protection
2. High rotating speed
3. Accurate dynamic balancing
4. Long time with low vibration
5. Safety and security
6. Continuous working
 Â
Technical parametersCondition for mineral oil separation and actual capacity (refer to the chart)
Oil types |
Heavy diesel oil |
Lubrication oil |
|||||||
SAE30,40 |
Detergence oil |
Steam turbine oil                      |
|||||||
Kinematical viscosity(mm2/s) |
13 |
20.5 |
36.2 |
80 |
100-120 |
61.2-74.8 |
|||
50ºC |
40ºC |
40ºC |
|||||||
Density/(kg/m3)(20ºC) |
<900 |
900-991 |
880-900 |
<900Â Â |
|||||
Separating temperature (ºC) |
40 |
60 |
80 |
80-95 |
|||||
Recommended capcity (L/h) |
900-10000 |
300-7000 |
|||||||
 |
Oil types |
Fuel oil |
||||
Fuel oil |
Heavy fuel oil |
||||
Kinematical viscosity(mm2/s) |
1.9-5.5 |
5.5-24 |
120 |
180 |
380 |
40ºC |
50ºC |
||||
Density/(kg/m3)(20ºC) |
<900 |
900-991 |
|||
Separating temperature (ºC) |
Normal temperature,40-60degree best |
90-98 |
|||
Recommended capacity (L/h) |
From 650L/H to 25000L/H depends on different oil and working temperature |
Â
Bicycle Headset is a small but important part of bicycle direction system. It is a bearing assemble at head tube that connects the handlebar to the top tube of the fork, allowing it to be rotated for steering and balance purposes. Because of the protruding shape of the bearing base, so it also called a Bicycle Bowl Set.
Our Bicycle Head Set made of aluminum alloy so it has a good strength and nice regular shape, the surface is glossy and has bright color due to the good baking paint. Some shop also sells the steel Bike Headset to use on lower-end public bicycles or very cheap bikes, but will rust if gets wet or keep in humid environment.
Bicycle Bowl Set,Bicycle Headset,Bicycle Head Set,Bike Headset
Suzhou Jingqiyao Intelligent Technology Co., Ltd. , https://www.polsobike.com