Ministry of Industry and Information Notice Improves Safety Technical Performance of Large and Medium Passenger Vans

All provinces, autonomous regions, municipalities directly under the Central Government, Xinjiang Industrial and Construction Corps and Public Security Bureau (bureau):

Recently, heavy and severe road traffic accidents have occurred frequently, causing huge losses to people's lives and property. From the analysis of accident investigations, there are management and operational problems such as overcrowding, overspeeding, illegal loading, and fatigue driving, as well as safety technical performance problems of large and medium-sized passenger trucks. Some large and medium-sized passenger vehicles have problems with low body structure strength, imperfect occupant protection facilities, and poor anti-roll stability stability; some sleeper buses have potential safety hazards such as many flammable products in the vehicle and narrow escape routes; large trucks and trailers There are overloaded, extra-long, and extra-wide illegal transportation problems, and the problem of illegally refitting goods transport vehicles and low flatbed vehicles is outstanding. In order to implement the spirit of the relevant meeting of the State Council Safety Committee, further improve the technical performance of vehicle safety, and strengthen the management of vehicle registration and registration, the relevant matters are hereby notified as follows:

I. Improving the technical safety requirements for large and medium-sized passenger trucks Passenger car and truck products should meet the following requirements:

Road and passenger coaches shall be equipped with a tachograph with satellite positioning function, equipped with a speed limiting device, and the maximum speed set by the speed limiting device shall not exceed 100 km. All seats shall be equipped with a seat belt; II, III The strength of passenger car body structure should meet the requirements of the GB/T17578 "superstructure strength of passenger cars" standard, and the strength of class B passenger car bodies should comply with the requirements of GB18986 "Safety requirements for light passenger car structures"; passenger cars and coaches with a car length greater than 9 meters. Passenger cars shall be provided with at least two passenger doors, radial tires for vehicles equipped with gear retarders or other auxiliary braking devices, and disc brakes for front wheels; road passenger cars and tourist bus bodies with a length of more than 11 meters shall be fully loaded. Framework.

Dangerous goods transport vehicles and trucks with a total mass of more than 12 tons shall be equipped with a retarder or other auxiliary braking device. The dangerous goods transport vehicle shall be equipped with a speed limiting device. The maximum speed set by the speed limiting device shall not exceed 80 kilometers. Disc brakes should be equipped; trailers with a total mass of more than 12 tons and trailers with a length of more than 8 meters should be equipped with tailgate signage that complies with national standards. Vans and van trailers should be equipped with reflective body-reflectors that meet the requirements of reflectors. All trucks shall be sprayed with total quality parameters on both sides of the cab, semi-trailer tractors with maximum allowable traction quality parameters, and the height of the railing trucks and dump trucks shall also be sprayed, and tank cars and trailers shall also be in the tank. The volume of the sprayed can body on the body and the type of items allowed to be shipped, the font height is not less than 80 mm.

Starting from March 1, 2012, the above-mentioned passenger cars and trucks of the newly established type shall meet the above requirements; as of September 1, 2012, the above-mentioned passenger cars and trucks produced shall meet the above requirements.

II. Regulating and strengthening the management of the "Notice" (1) Authorized vehicle inspection agencies must strictly comply with the national standards when inspecting the prototype vehicles for the "Announcement of Road Motor Vehicle Manufacturing Enterprises and Products" (hereinafter referred to as the "Announcement"). The relevant regulations shall not reduce the inspection items and reduce the inspection standards; the tests on the upper structure strength of large and medium-sized coaches, the roll stability of vehicles, and the installation strength of seats and fasteners must be conducted through actual vehicle tests. No calculation method shall be used. Alternative. If an inspection agency that does not perform product inspection or falsification in accordance with the requirements during the inspection work is found to have been verified, it will be severely dealt with in accordance with relevant regulations, and its product inspection authorization will be suspended or revoked according to law.

(2) From the date of issuance of this notice, the Ministry of Industry and Information Technology shall suspend the application of the "Announcement" for the declaration of new products for sleeper buses before the revised safety technical standards for sleeper buses. Since March 1, 2012, related companies should suspend the production and sale of sleeper bus products, and the Ministry of Industry and Information Technology has suspended all "sleepers" of the sleeper bus products, and the traffic management department of the public security organ has suspended the registration of registration of the sleeper buses.

(3) Before February 29th, 2012, the review of all vehicle products in the “Announcement” will be completed, focusing on the examination of large and medium-sized passenger trucks and vehicles, especially road passenger cars, tourist buses, school buses, heavy-duty trucks, and dangerous goods carriers. , low flatbed trucks, trucks for goods vehicles, etc. comply with national standards, "Notice on Further Strengthening the Supervision and Registration of Road Motor Vehicle Consistency Production and Registration Work" (Ministry of Industry and Information Industry, [2010] No. 453) and this notice on large and medium-sized passengers Technical conditions for trucks. The Ministry of Industry and Information Technology suspended its “announcement” for six months that did not meet the regulatory requirements, and announced that during the suspension period, enterprises should not produce or sell products that suspend the “Announcement” and suspend the products of the “Announcement”. The traffic management department of the public security organ will not register. After the suspension expires, products that still do not meet the requirements are cancelled. After the “Announcement” product is revoked, the “Announcement” may not be re-submitted to the same vehicle type, and production and sales may not be continued. The traffic management department of the public security organ shall not apply for registration.

(IV) Since September 1, 2012, the trailer has been included in the “Notice”; since January 1, 2013, the traffic management department of the public security organ has handled the registration of the trailer in accordance with the “Announcement”. The relevant management regulations will be formulated separately.

Third, to strengthen vehicle production quality supervision and management Vehicle production enterprises are responsible for ensuring the consistency of production, it is necessary to strictly in accordance with national laws, regulations and relevant departments of the competent authorities, establish and improve the production consistency assurance system to ensure that the mass production of vehicle products in line with the state standard requirement. The Ministry of Industry and Information Technology and the Ministry of Public Security will form a joint working group to regularly supervise and inspect the conformity of vehicle products during production and registration and strictly control access to vehicle production. Before March 1, 2012, the provincial department of industry and information management shall, together with the traffic management department of the public security organ, complete the investigation of large and medium-sized vans that have not yet been manufactured or have been manufactured but have not been sold in accordance with national standards and relevant regulations. , Focus on inspecting the body structure strength of passenger car products, the installation strength of the seats, as well as the size parameters, quality parameters, strength of protective devices, reflective signs of vehicles and ABS devices. For illegal products investigated and dealt with by various localities, the production enterprises shall be ordered to stop production and sales immediately, carry out rectification, and report to the Ministry of Industry and Information Technology and the Ministry of Public Security. The Ministry of Industry and Information Technology and the Ministry of Public Security will, in accordance with the relevant regulations, severely deal with illegal companies and products.

Fourth, to strengthen the registration of vehicles All local public security traffic management departments must strictly check large and medium-sized passenger trucks, focusing on the inspection of passenger vehicle tires, number of seats, emergency escape devices, safety belts, speed limiting devices, and the dimensions of freight cars, and body reflection. Marking, side rear guards and other items. If the main features and technical parameters of the motor vehicle are found to be inconsistent with the national standards, or are inconsistent with the data in the "Notice", registration of the vehicle will not be registered, the inspection qualified mark will not be issued, and the copying information, photographs, etc. Registration system reporting. The provincial public security traffic management department shall compile and submit to the Ministry of Public Security, the Traffic Control Bureau a list of illegal motor vehicle products and production enterprises, and notify the Ministry of Public Security Administration of Communications of the Ministry of Industry and Information Technology. For non-compliant motor vehicle products that cannot be registered, the vehicle production enterprise shall carry out rectification, replacement, or return without conditions.

V. Strengthen the management of trucks for goods vehicles From February 1 to June 30, 2012, we will carry out a five-month centralized rectification of trucks for goods vehicles. The local industrial and informatization authorities shall conduct centralized inspections on the production vehicles for goods vehicles in the area under their jurisdiction. For the production enterprises in the “Announcement” to manufacture or modify the illegal goods vehicles, the Ministry of Industry and Information Technology shall revoke their production qualifications according to law. . For enterprises that illegally produce trucks for goods vehicles, they will notify relevant law enforcement agencies and deal with them in accordance with the law. All local public security traffic management departments must strictly inspect the exterior dimensions of vehicles when they apply for the registration and regular inspection of trucks for goods vehicles. For those that do not meet the national standards, such as being long, wide, and using retractable bodies, etc. No registration is required and no inspection mark will be issued. Public security and traffic management departments throughout the country must combine the rectification of speeding, overcrowding, overloading, and fatigue driving, and carry out in-depth traffic order rectification and intensify road inspections. The focus will be on increasing the control and control of the areas and road sections where automobile manufacturers dispatch regions, and setting up checkpoints in key factory areas to strictly investigate the use of illegal goods vehicle transport vehicles for transportation from the source. Strengthen inter-provincial collaboration, establish a joint inspection and working mechanism, make full use of inter-provincial and inter-city traffic safety law enforcement service stations, and implement mandatory inspections of commodity trucks. For those who exceed the quality of the approved vehicles, they shall be severely punished according to law and detained from motor vehicles until their illegal status is eliminated. If the illegally refitted goods vehicles have been lengthened or widened, they shall be punished according to law and ordered to be reinstated. They shall be entered into the public security traffic management information system, notified by the public security traffic control department of the registered place, and the registration and periodic inspections Inspection.