In the construction of the three-dimensional parking garage, it is often encountered that the self-propelled ramp cannot be used due to the small site. In order to transport the vehicles to different levels for access to the vehicles, it is necessary to use a vertical lift for vehicles. This can replace the ramp for cars to enter and exit the garage, greatly saving space and improving the utilization rate of the garage. This kind of special car elevator is often used for underground or roof and building self-propelled garage to access cars.
Four post car lift emergency stop device, emergency stop button, that is, if an emergency occurs during operation, press the emergency stop button to make the system stop until the fault is eliminated. Buffer device: in order to reduce the impact when the elevator descends, a buffer is set in the pit to reduce the impact. Limit switch: in order to prevent the elevator from hitting the top or exceeding the operating area, a limit switch shall be set to stop the elevator automatically when reaching the limit position. Hydraulic safety valve: in case of oil pipe bursting or sudden unloading, the safety valve will automatically close to prevent the carrier plate from falling and avoid accidents. A device for preventing the motor from idling and adjusting the lowering level of the carrier.
Four-Post Lifts,4 Post Car Lifts,4 Post Electric Car Lift Elevator,4 Post Car Lift Machine zhongcan machinery Co.,Ltd , https://www.zclift.com
Ningbo HongXin Precision Machinery Co.,Ltd. (Herein after referred as HongXin)'s predecessor began the business in 2011. With more than 6 years' experience, HongXin has one 8000m2 factory in Ningbo City, China. All products pass the RoHS, SGS inspection.
Â
Product introduction
Technics & process
Aluminum alloy die casting: ADC12/A360/A380/Alsi9cu3/Alsi12Cu1Fe/Alsi12Fe,etc.
Zinc alloy die casting: Zamak3/Zamak5/ZA8/ZL4-1, etc. Aluminum alloy profile extrusion: 6061 6063 CNC machining and Turnning: 6061 6063 Copper Brass Y12 Stainless steel and carbon steel Part Weight: From 10g to 15000g Mould manufacture: Part design drawing (prt/fem/igs/stp/dxf/model/x-t/x-b forms)-mould making-sample supplied
Equipment
Cold chamber die casting machine:180T/280T/350T/500T/800T/1250T
Hot chamber die casting machine: 58T/88T/168T/200T
Heat profile extrusion machine: 58T/88T/168T/200T/250T/500TCNC centers, CNC turning, CNC lathes, electrical pulse, line cutting, milling, drilling, grinding
Surface Treatment
Trimming, Deburring,Polishing, shot blasting, sandblasting,tumbling, powder coating, anodizing, chrome, zinc, electrophoresis, passivation, chemical coating
Software Assistance
Pro-e/Solid work/UG/Auto CAD/CATIA
Products Application
Automobile
Bicycle and motorcycle Door and windows and furniture Household  appliance Gas meter Power tool
Manufacture Process
1.Review the part design,drawings and quality standard from clients.
2. Mould and Tooling design & manufacturing
3. Mould and Tooling testing & confirm the sample
4. Die casting raw castings
5.Surface treatment: Trimming,Deburring, polishing, cleaning, passivation & power coating and other     requirement from Customer
6. Precision machining: CNC lathes, milling, drilling, grinding etc
7. Full Inspection
8. Packing
9. Delivery
Â
Service
1. OEM and ODM.
2. Quotation within 24 hours.
3. Inspection service by SGS or any other inspection assigned by Customer.
4. Shipping service.
5. Â After service
Why choice us
1.Our technical know-how and experiencee team ensure us being able to offer the service with International standard towards to our customers.
2.Rely on International tooling designing concept and manufacturing,we could build tailor-made tool to satisfy with your products quality requirement.
3.Equipped unique with top performance die casting machines and CNC machines, give us the possibility to produce high precision products.
4.The strong application technical support towards the customer in project development phase which difference from  the other suppliers.Our mission is building long term co-operation with our customers.
Â
Ningbo HongXin Precision Machinery Co.,Ltd. (Herein after referred as HongXin)'s predecessor began the business in 2011. With more than 6 years' experience, HongXin has one 8000m2 factory in Ningbo City, China. All products pass the RoHS, SGS inspection.
Â
Product introduction
Technics & process
Aluminum alloy die casting: ADC12/A360/A380/Alsi9cu3/Alsi12Cu1Fe/Alsi12Fe,etc.
Zinc alloy die casting: Zamak3/Zamak5/ZA8/ZL4-1, etc. Aluminum alloy profile extrusion: 6061 6063 CNC machining and Turnning: 6061 6063 Copper Brass Y12 Stainless steel and carbon steel Part Weight: From 10g to 15000g Mould manufacture: Part design drawing (prt/fem/igs/stp/dxf/model/x-t/x-b forms)-mould making-sample supplied
Equipment
Cold chamber die casting machine:180T/280T/350T/500T/800T/1250T
Hot chamber die casting machine: 58T/88T/168T/200T
Heat profile extrusion machine: 58T/88T/168T/200T/250T/500TCNC centers, CNC turning, CNC lathes, electrical pulse, line cutting, milling, drilling, grinding
Surface Treatment
Trimming, Deburring,Polishing, shot blasting, sandblasting,tumbling, powder coating, anodizing, chrome, zinc, electrophoresis, passivation, chemical coating
Software Assistance
Pro-e/Solid work/UG/Auto CAD/CATIA
Products Application
Automobile
Bicycle and motorcycle Door and windows and furniture Household  appliance Gas meter Power tool
Manufacture Process
1.Review the part design,drawings and quality standard from clients.
2. Mould and Tooling design & manufacturing
3. Mould and Tooling testing & confirm the sample
4. Die casting raw castings
5.Surface treatment: Trimming,Deburring, polishing, cleaning, passivation & power coating and other     requirement from Customer
6. Precision machining: CNC lathes, milling, drilling, grinding etc
7. Full Inspection
8. Packing
9. Delivery
Â
Service
1. OEM and ODM.
2. Quotation within 24 hours.
3. Inspection service by SGS or any other inspection assigned by Customer.
4. Shipping service.
5. Â After service
Why choice us
1.Our technical know-how and experiencee team ensure us being able to offer the service with International standard towards to our customers.
2.Rely on International tooling designing concept and manufacturing,we could build tailor-made tool to satisfy with your products quality requirement.
3.Equipped unique with top performance die casting machines and CNC machines, give us the possibility to produce high precision products.
4.The strong application technical support towards the customer in project development phase which difference from  the other suppliers.Our mission is building long term co-operation with our customers.
Â
Model NO.: HX-motorcycle 001
Certification: Ts16949
Thermal Machine: External Combustion Type
Four Stroke Principle: Compression Stroke
Main Market: Southeast Asia
Part Material: Aluminum Alloy ADC12
Mold Cavities: 1
Die Casting Machine Type: 350 Ton Cold Chamber Die Casting Machine
Machining Equipment: CNC Machine
Part Weight: 560g
Surface Treatment: Shot Blasting
Tolerance Grade: 8
Lead Time for Mold: 6 Weeks
Applications: Motorcycle Engine Cylinder
Transport Package: PP Bag or Bubble Bag and Carton and Pallet
Origin: Ningbo City, China
HS Code: 8714190090
Model NO.: HX-motorcycle 001
Certification: Ts16949
Thermal Machine: External Combustion Type
Four Stroke Principle: Compression Stroke
Main Market: Southeast Asia
Part Material: Aluminum Alloy ADC12
Mold Cavities: 1
Die Casting Machine Type: 350 Ton Cold Chamber Die Casting Machine
Machining Equipment: CNC Machine
Part Weight: 560g
Surface Treatment: Shot Blasting
Tolerance Grade: 8
Lead Time for Mold: 6 Weeks
Applications: Motorcycle Engine Cylinder
Transport Package: PP Bag or Bubble Bag and Carton and Pallet
Origin: Ningbo City, China
HS Code: 8714190090