What is the difference between a radiator, a condenser, an evaporator, and an intercooler on a sprinkler ? Radiator refers to the cooling component of the engine cooling system. The radiator is the radiator. It is equipped at the rear of the grille. There are two electronic fans on the back. One is for the radiator and the other is used for recycling. It is for small loops, so these two electronic fans are mostly big and small. The condenser and the evaporator are the configurations used by the air conditioner. The condenser and the evaporator are mostly near the air conditioning equipment, and the specific location depends on the vehicle model. Generally, it is also in the rear part of the air intake grille, where there is the most intake air, and it is most conducive to cooling. An intercooler is a proprietary component of a supercharger model that cools the pressurized air.
Slewing Controller is a kind of Tower Crane slewing control device, combined speed and voltage regulation and eddy current speed controling. The slewing control block control the speed of eddy current torque motor, to make the tower crane slewing mechanism start, working and stop smoothly. This kind of Slewing Controller is used to regulate and control the speed of three-phase torque motor of AC 50Hz, voltage 380V.
HRCV slewing controller is a hoisting slewing controller developed by our company according to service condition of customer.
Slewing Controller,Slewing Control Block,Eddy Current Torque Motor,Slewing Controller for Tower Crane,Slewing Block SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com
The main technical feature as follows:
(1) This product combined the controller and thyristor module,the connection of the users is simple and easy.Prevent the damage of the controller and thyristor module caused by mis-wiring of the customer.
(2) Realize the best optimization of AC voltage control curve and DC voltage control curve.
(3) With the function of inching during operation, realize the accuracy.
(4) The electronic components adopt the imported industrial grade chip, on the control panel directly with power supply and direction indicator light.
(5) Adopt the coating treatment on the printed circuit board,enhance the dust prevention and anti-condensation capacity of the circuit board.
Sprinkler manufacturers communicate with technicians in the production of sprinklers, and patiently explain each component.