TPU Color Change Film have TPU Carbon Fiber Film, TPU Gloss Film, TPU Matte Film, TPU Metallic Film and many more Car Color Wraps all with self-healing TPU material very good stretchable, anti-scratches, imported glue. *Provide paint protection film (TPU) and achieve car color change at an affordable price! This is an excellent solution for protecting the surface of your car, reducing repair costs. TPU Color Wrap,TPU Color Changing Film,TPU Car Film,TPU carbon Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylcarstickers.com
Features of high frequency induction hardening machine
1. IGBT modules, save energy than traditional high frequency tube heater.
2. Protect full.Over current.over voltage,lack of phase,water shortage, etc. more than ten alarm lamps.
3. Heating fast.Within1 second ,temperature rise up to 1200 degree,even higher.Â
4. No need contacting work pieces, safety, safe and reliable.
5. Environmental friendly,no pollution, good for worker's health
6. Easy to change induction coils, for heating different shape of steel billet
7. Easy to install and operate.
8. Low maintenance cost
Technical parameters of induction hardening machine
Model
TZP-200
Voltage
320-420V
Input currentÂ
6-200A
Oscillation frequency
10-50KHZ
Cooling water pressure
0.3MPA
Generator size/weight
850*600*1330mm/131kg
Â
transformer size /weightÂ
780*540*520mm /89kgs
Â
Water cooling temperatureÂ
protect point below 50 degreeÂ
CNC quenching induction hardening machine tool has the following features:Â
  1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs.Â
  2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching.Â
  3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on.Â
  4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process.Â
  5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment.Â
  6, the fuselage structure by profile, low cost, light weight, economical and practical.Â
  7, easy maintenance, low failure rate, no leakage.Â
  8 high degree of automation and production efficiency.Â
  9, rail uses linear bearings, high precision, small friction, long life.Â
  10, with heavy equipment through the sprocket, chain balance the weight. 
Technical parameters of CNC induction hardening machine tool
Model
TD-1500
Max .hardening length
1500mm
Max tacital diameter
500mm
workpiece moving speed mm/s
2-60
rotation speed r/min
30-150mm
tips moving speed mm/min
480
work piece
150kg
input voltage
two phase 380V
Totally motor power
1.5KW
quenching work piece station
single
Applications of induction hardening machineÂ
:Heat Treatment (surface hardening/quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows: Â
1. Hardening for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Hardening for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Hardening for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Customized CNC Hardening machine tool
FAQÂ
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc.Â
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.
We offer complete service :Â
Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.
Â
Features of high frequency induction hardening machine
1. IGBT modules, save energy than traditional high frequency tube heater.
2. Protect full.Over current.over voltage,lack of phase,water shortage, etc. more than ten alarm lamps.
3. Heating fast.Within1 second ,temperature rise up to 1200 degree,even higher.Â
4. No need contacting work pieces, safety, safe and reliable.
5. Environmental friendly,no pollution, good for worker's health
6. Easy to change induction coils, for heating different shape of steel billet
7. Easy to install and operate.
8. Low maintenance cost
Technical parameters of induction hardening machine
Model
TZP-200
Voltage
320-420V
Input currentÂ
6-200A
Oscillation frequency
10-50KHZ
Cooling water pressure
0.3MPA
Generator size/weight
850*600*1330mm/131kg
Â
transformer size /weightÂ
780*540*520mm /89kgs
Â
Water cooling temperatureÂ
protect point below 50 degreeÂ
CNC quenching induction hardening machine tool has the following features:Â
  1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs.Â
  2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching.Â
  3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on.Â
  4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process.Â
  5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment.Â
  6, the fuselage structure by profile, low cost, light weight, economical and practical.Â
  7, easy maintenance, low failure rate, no leakage.Â
  8 high degree of automation and production efficiency.Â
  9, rail uses linear bearings, high precision, small friction, long life.Â
  10, with heavy equipment through the sprocket, chain balance the weight.Â
Technical parameters of CNC induction hardening machine tool
Model
TD-1500
Max .hardening length
1500mm
Max tacital diameter
500mm
workpiece moving speed mm/s
2-60
rotation speed r/min
30-150mm
tips moving speed mm/min
480
work piece
150kg
input voltage
two phase 380V
Totally motor power
1.5KW
quenching work piece station
single
Applications of induction hardening machineÂ
:Heat Treatment (surface hardening/quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows: Â
1. Hardening for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Hardening for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Hardening for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Customized CNC Hardening machine tool
FAQÂ
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc.Â
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.
We offer complete service :Â
Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.
Â
*Car paint can be damaged and withered by harmful rays. After using TPU, it will age naturally and will not change color for a long time.
*Providing a paint protection film on the surface of your car will have no side effects. If you wish to remove the TPU layer, it can be done without any damage to the vehicle.
*This is the ideal solution for protecting your car from bugs and wear and tear.
*The paint protection layer is invisible so it enhances the appearance. It can also wash and clean the car.
*Small scratches on the TPU will heal themselves when the TPU reaches the proper temperature.
*You can give a standardized look and make it look polished and shiny by applying a PPF protective layer.
*It is durable and easy to install.
Model NO.: TD-1500
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Model NO.: TD-1500
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Roller shaft quenching CNC induction hardening machine tool
Roller shaft quenching CNC induction hardening machine tool