Blender using safe editing

1. The mixer should be set in a flat position, and use square wood to lift the front and rear axles to make the tires stand overhead so as to avoid walking when starting.

2. The secondary leakage protection should be implemented in the mixer. After the power supply is turned on before work, it must be checked carefully. After the empty vehicle is tested and passed, it can be used. During commissioning, it is necessary to check whether the mixing drum speed is appropriate. In general, the proportion of empty cars is slightly faster (after loading), 2 to 3 turns. If there is a large difference, the ratio of the driving wheel to the transmission wheel should be adjusted.

3. The rotation direction of the mixing cylinder should follow the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.

Brandt LCM-2D Shaker Screen

Brandt LCM-2D Shaker Screen

Replacement Flat Screens for Brandt BLT-50/LCM-2D Shakers

SJ-Brandt LCM-2D shaker screen are constructed with two or three layers of 304 or 316 stainless steel wire mesh cloth, and then combined together with a steel backing plate. This type of shaker screen is produced for the replacement screen for Brandt BLT-50/LCM-2D (bottom basket) shale shaker. Mesh size range is from API 20 to API 325. The screens vary greatly in size and shape for different layers. Thus, the intensity and endurance of the screen have been infinitely enhanced, so as to achieve maximum solids removal efficiency.

Technical Parameter

  • Mesh Material: stainless steel 304/316/316 L.
  • Frame Material: Q235 steel.
  • Screen Type: XL, XR.
  • API RP 13C Designation: API 20–API 325.
  • Package: Packed in paper carton, shipped by wooden case.

Adaptable Shale Shaker Model

SJ-Brandt LCM-2D shaker screen are used as the substitute screen for

  • Brandt BLT-50 shale shaker.
  • Brandt LCM-2D shale shaker.

Competitive Advantage

  • Reliable, low-maintenance, trouble-free operation.
  • Specialty design for maximum solids removal efficiency.
  • Integrated drying screen for fine screen deck.
  • Manufactured according to the API RP 13C (ISO 13501).
  • Scientific & reasonable cost control system for competitive price.
  • Adequate inventory in the shortest time to meet customers' demand.
Brandt LCM-2D Shaker Screen

Remarks:

Brandt, BLT-50, LCM-2D are marks of Varco I/P, Inc.

Brandt LCM-2D Shaker ScreenBrandt LCM-2D Shaker Screen

Brandt Lcm-2D Shaker Screen ,Lcd Touch Screen,Lcd Projector Screen,Lcm Screen

Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com