industrial roller blinds,industrial shutters near me,industrial roller shades,industrial blackout blinds Guangdong Huachang Group Co., Ltd. , https://www.huachangaluminium.com
Network cabinets can extend the life of the server, and are generally used in the computer room. Since there are many equipments in the equipment room and they are all relatively high temperature equipment, the temperature will be too high after a long time of use. What is the cause of the excessive temperature?
1. There are many servers in the network cabinet. There is no free space to make the network cabinet get good heat dissipation, and the location of the server is dense, and the temperature will rise.
2. If the server port is not set properly, it will also affect the heat dissipation function of the network cabinet, which will exceed the range that the network cabinet can withstand.
3. If the location of the network cabinet is incorrect, the temperature will be too high. Do not place too many things around the network cabinet. Keep the surrounding environment clean and tidy, so that the network cabinet can get good heat dissipation.
4. There are still many factors that cause the temperature of the network cabinet to be too high. In order to make the network cabinet get good heat dissipation, we must keep the network cabinet in a good environment.
1. The network cabinet is mainly installed with IT equipment. It is more inclined to the cable management function. It should be connected and lead to many lines for the network cabinet. The server cabinet is more biased to load capacity and heat dissipation. It should be heavy for the server and heat dissipation. The amount is relatively high.
2. According to the first point, the network cabinet will generally be wider than the wide line. Generally, it is 800mm wide. It is convenient to arrange wiring accessories such as cable management and cable management boards at both ends. The server cabinet generally chooses 600MM wide. However, the load capacity is required to reach a certain weight (such as 1300KG), and the front and rear doors are required to have a relatively high through-hole ratio (such as about 70%). Some high requirements also require a cooling fan, and the high-density cabinet group will also be external. Air conditioning cooling is required (such as data center room).
3, depth, network cabinets because IT equipment is generally not very deep, so generally only require 600MM or 800MM deep, and server cabinets because the server is deep, and for the convenience of a heat dissipation space, the general depth will be 1000MM, 1100MM, 1200MM deep.