There are Bobcats all the way, the roads are smooth!

With the development of the times, China's transportation volume and road network density continue to increase, and the degree of mechanization of road construction is also increasing. With the help of the Bobcats, the road construction is faster, better and more environmentally friendly, and the roads are smooth!

The Bobcat Skid Steer Loader has a compact body and can be equipped with multiple tools such as breakers, wheel saws, and milling machines. It accomplishes the tasks of road maintenance in multiple processes, and does not occupy roads. It has little impact on traffic and is a road maintenance operation. Construction "tools"!

Bobcat skid loader with breaker installed

Road crushing operation

Road crushing expert

Under normal circumstances, the construction party will use the excavator to break the road surface. In fact, the Bobcat skid steer loader is equipped with a broken hammer for crushing operation. The striking capacity is equivalent to 6-8 tons of small digging, and the body is small, can be turned in place, and the efficiency is higher, which can completely replace the excavator!

The crushing operation can also use the Bobcat landing hammer, which can crush concrete up to 457mm thick, and has little noise and vibration to the environment, and is more suitable for urban road night work.

Bobcat landing hammer

Road milling expert

The Bobcat slip is equipped with a milling machine for efficient milling of the road surface. The fine cutter head can perform shallow trimming or marking removal on the road surface. The standard cutter head is suitable for milling of asphalt and concrete pavement, and the milling depth can reach 15CM. The Bobcat Miller hydraulically controls the sideways for milling at the wall roots and curbs, and the operator has a good viewing angle to control the milling depth.

Road milling expert

Road cleaning "up to people"

After the road surface is milled, the Bobcat skid steer loader can be used with the sweeper to sweep the slag from the road surface. The combination of purging and replacing, instead of the previous manual cleaning mode, not only saves costs, but also greatly improves work efficiency. It can clean up 10,000 square meters of road surface in a dozen hours!

The Bobcats can also carry out material loading and unloading when carrying the bucket. The wheel saw can be used for trenching, concrete pavement repair, water pipe, gas pipe, wire pipe and cable pipe before the trenching operation.

Ditching operation

Equipped with a Bobcat-specific quick changer, the operator can quickly and reliably replace the attachment within two minutes.
A bobcat slips, equipped with a breaker, a milling machine, a sweeper, a bucket and other attachments, can complete the road maintenance work efficiently. There are Bobcats all the way, and sure enough roads pass! (This article is from the Bobcats)