On June 29, the Ministry of Environmental Protection issued the “12th Five-Year Plan for Scientific and Technological Development of the National Environmental Protection”. The "Planning" proposes that the focus of pollution prevention and control technology research will shift from the end of governance to full prevention and control, and by the end of the "Twelfth Five-Year Plan," an environmental science and technology innovation system and environmental technology management based on full control of environmental pollution and ecological degradation shall be established. The system has obtained a batch of common sources and key technologies for controlling emission reduction with independent intellectual property rights around binding indicators.


The "Planning" clearly defined the hot spots and difficulties for environmental protection such as regional air pollution prevention, river basin water environmental protection, rural ecological environmental protection, prevention and control of heavy metal pollution, remediation of contaminated soils, response to climate change, and prevention and control of persistent organic pollutants (POPs). The main tasks in 12 areas.


For the prevention and control of water pollution, the river basin water pollution control technologies and water environment management technology systems have been basically established to support the significant improvement of water quality in key river basin demonstration areas. For air pollution prevention and control, research and development of thermal power plant denitrification catalyst production technology with independent intellectual property rights, volatile organic compounds and odorous gas typical pollution source control technologies and their corresponding processes and equipment, and the development of toxic air pollutants such as heavy metals and dioxins. Emission control technology research.


In the aspect of prevention and control of solid waste pollution and chemical management, the company has studied the basic technical methods and corresponding policies and systems for chemical risk management and harmless management, and conducted research and demonstration on environmental risk prevention and control technologies for chemical and chemical pesticides in key regions and key industries. Research on new chemical substances, ecological hazard testing, predictive assessment and chemical exposure assessment techniques.


In the areas of green economy, cleaner production and recycling economy, we will carry out art research and development and demonstration of cleaner production key industries such as rare earths, chemicals, and building materials.


In the area of ​​global environmental issues, we will study the sources of POPs, pollution concentrations, pollution characteristics, migration patterns, reduction and control technologies, and ecological risk assessment and warning technologies in typical regions in China. We will study sources, characteristics, migration patterns, and control technologies of mercury pollution in typical industries. Research on mercury emission reduction policies in key industries and alternative technologies for mercury-containing products.


In order to better enhance the ability of environmental science and technology innovation, in the “Twelfth Five-Year Plan”, China will establish pollution control national environmental protection engineering and technology centers for petrochemicals, pesticides and other key industries, as well as the control of solid waste resources and pollution, and control of hazardous wastes in the whole process. National environmental protection key laboratory for chemical environmental behavior simulation and other directions. To complete the "Planning" key tasks and strengthen environmental science and technology support capacity building, it is expected that the state will need to invest about 22 billion yuan, of which investment estimates for water pollution prevention, air pollution prevention, solid waste pollution prevention and chemical management are estimated to be 5 billion yuan respectively. , 3 billion yuan and 2 billion yuan.

Auto Air Filter Paper

Auto Air filter paper
1Good air permeability
2High efficiency
3High dust holding
4High stiffness and burst resistance

Auto filter paper
This filter media is made of high quality wood pulp as raw material.
Application:

Auto air filters, Auto fuel filters, Auto oil filters, etc.

1. Air Filter Paper:

(1) Grammage (g/m2) :135±5

(2) Thickness (mm) : ≥0.4

(3) Corrugation Depth(mm) : 0.1~0.35

(4) Air Permeability (p=200pa L/m2.s) :120--800

(5) Burst Strength (Kpa) :≥ 200

(6) Max Pore Size (µm) : 90

(7) Stiffness(mN.m) : ≥4.5

2. Oil Filter Paper:

(1) Grammage (g/m2) : 135±5

(2) Thickness (mm) : ≥0.4

(3) Corrugation Depth(mm) : 0.1~0.35

(4) Air Permeability (p=200pa L/m2.s) : ≥300

(5) Burst Strength (Kpa) : ≥200

(6) Max Pore Size (µm) : 100

(7) Stiffness(mN.m) : ≥4.0

3. Air/Oil Filter Paper:

(1) Grammage (g/m2) : 135±5

(2) Thickness (mm) : ≥0.4

(3) Corrugation Depth(mm) : 0.1~0.35

(4) Air Permeability (p=200pa L/m2.s) : ≥300

(5) Burst Strength (Kpa) : ≥200

(6) Max Pore Size (µm) : 110

(7) Stiffness(mN.m) : ≥4.0

4. Fuel Filter Paper:

(1) Grammage (g/m2) : 135±5

(2) Thickness (mm) : ≥0.35

(3) Corrugation Depth(mm) : 0.1~0.35

(4) Air Permeability (p=200pa L/m2.s) : ≤160

(5) Burst Strength (Kpa) : ≥300

(6) Max Pore Size (µm) : 80

(7) Stiffness(mN.m) : ≥4.0

Note: the color, size and each specification parameter can be changed as per your requirement.


Packing of Auto Air Filter Paper


Auto Air Filter Paper,Air Filter Paper For Car,Air Filter Paper For Auto,Air Filter Paper For Auto Parts

Hebei Fangyu Trade Co., Ltd. , https://www.fangyu-filtermedia.com