The turning conveyor has a long transportation distance and can be equipped with an intermediate drive device to meet the demand. It can also be selectively transported according to the requirements of the conveying process. It can be conveyed by a single machine, or multiple units can be combined into a horizontal or inclined conveying material transportation system. A common emergency measure is to set up side vertical rollers, that is, set up vertical sticks on the inside and outside of the conveyor belt at the turn to limit the deviation of the conveyor belt. This measure often takes effect and will shorten the life of the conveyor belt. Turning Belt Conveyor,90 Degree Turn Belt Conveyor,Power Turn Bet Conveyor Shijiazhuang EFU Machinery Co., Ltd , https://www.efuequip.com
Front-end acquisition equipment: The so-called front-end acquisition equipment is what we often call surveillance cameras, alarms, etc., which are generally used to collect audio and video data of monitoring points. The monitoring equipment with special functions can also collect the temperature and humidity of the monitoring points. Wind direction, wind speed and other data.
The wireless monitoring system is a combination of monitoring technology and wireless transmission technology. Its function is that the field data information of different places can be transmitted to the monitoring center through wireless communication technology, and the video database can be automatically saved and retrieved. Simply put, a complete wireless monitoring system consists of three parts: the front-end acquisition device, the middle wireless transmission part, and the back-end receiving display part.
The intermediate wireless video transmission part of the equipment includes: wireless bridge transmitter (such as 5.8G wireless bridge, 2.4G wireless bridge), wireless bridge receiver (such as 5.8G wireless bridge, 2.4G wireless bridge), POE Power supply module (generally including power adapter and power supply module), U-type clamp code for fixed transmitter and L-type bracket (for fixed bridge), transmitter receiver feeder, bridge dedicated antenna (some bridges have built-in antenna ), waterproof plug (to prevent moisture from entering the interior of the wireless bridge).
The back end receives the display part: the back end receiving display part is a device capable of directly displaying the monitoring information, and the monitoring terminal user can easily grasp the alarm information, the monitoring screen and other information that the user wants to link, which is most commonly used. The monitoring terminals are NVR network DVR, hard disk (for recording surveillance video), switch (integrated data transmission to NVR and monitor), and monitor (monitor display).
The above is the introduction of the equipment consisting of the wireless monitoring system. In the actual application, the relevant equipment is specifically configured according to the actual needs, so as to ensure the high-definition stable transmission of the video signal of the wireless monitoring system. For more specific implementations of wireless monitoring, you can call Tengyuan Zhituo. Our technicians will configure the user with the most economical and reasonable wireless monitoring solution according to the actual situation of the user.