Boiler tubes is a one of seamless pipe. Manufacturing methods is the same as seamless tube, but it has the stringent requirements for manufacture of steel pipes. According to the temperature level,boiler tube is divided into general boiler tubes and high pressure boiler tube.
Boiler Tube,Boiler Seamless Tube,High Pressure Boiler Pipe,Boiler Seamless Steel Pipe Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
1. Flow chart of production:
Scrambler Lining the performs--Â Preforms be loaded by transfer-- Heated by lamps
-- Blowing station(sealing-stretching-blowing)-- Bottles be delivered by transfer arm-- Finished goods.
2. Blowing Procedure:
(1) Loading preformsPreforms are put into the hopper and delivered to the scrambler by transfer belt. Lined preforms in the guiding rail will go into heating part automatically because of the gravity. So the whole process of scrambling preforms is accomplished automatically and with the features of high efficiency and low possibility of scratching preforms.
(2) Adjusting temperaturePreforms are put on the spindle by transfer arm and then continuously go through the heating zone, during this process preforms are rotating themselves so that it can be evenly heated. The heating zone is controlled by Siemens intelligent controller, so every layer of lamps can be controlled separately. The special design of neck protection device can prevent neck from being deformed. The temperature of every layer lamps is operated by human-computer interface, which is more convenient and intuitively.
(3) Stretching and blowingCylinder guiding rail structure accurately control the opening and closing of mold frame, so the mold frame structure is stable and easily to change molds. Special mold locking pressure increasing system; every blowing parameter can be adjusted by touch panel, can easily judge the breakdowns; special nozzle device guarantee the reliability of sealing even under all kinds of pressure, special blowing controlling way greatly improves the finished goods rate
(4) bottles be transferred out of equipmentAfter blowing, bottles will be catched by transfer arm in the spindle and then be delivered to the transferring belt, which guarantee the continuously bottle production, the bottles will be delivered to bottle tank finally.
3. Technical Specification :
MODEL
UNIT
5L
CONTAINER
Max.container volume
L
5
Max. neck diameter
mm
50
Max. container diameter
mm
180
Max. container height
mm
340
Number of cavities
Â
2
Theoretical output
BPH
1200
ELECTRICITY SYSTEM
Installed power
Kw
36
Max. heating power
Kw
32
COMPRESSED AIR SYSTEM
Operating pressure
Mpa
0.7
Low pressure Air consuming
M3/min
2.0Â
Blowing pressure
Mpa
4.0
High pressure Air consuming
M3/min
2.5-3.2
Use mould Booster
Â
Yes
CHILLED WATER
Pressure
Mpa
30-40
Temperature
ºC
10-12
Flow rate
L/min
30
MACHINE
Size(L*W*H)
mm
3500 X2100X1900
Weight
Kg
4500
4. Details:
5. If you are interested in our machines,welcome to our factory to visit.
Please Contact:
Miss Amy
Phone:+86 17751206107
Website:www.veshine.com
Production methods:
①general boiler tube temperature is below 350 ℃, using hot-rolled pipe or cold drawn tube manufacture Steel Pipe.
â‘¡ high-pressure boiler tube is used often in conditions of high temperature and high pressure pipe, the effect of high temperature flue gas and water vapor, oxidation and corrosion. Steel pipe with high rupture strength, high resistance to oxygen corrosion and have good organizational stability.
Boiler tubes purposes:
â‘ general boiler tubes is mainly used to manufacture water wall tubes, tubes in boiling water and super heated steam pipe, super heated steam locomotive boiler tubes, large and small smoke pipe and pipe arch brick.
â‘¡ high-pressure boiler tubes are mainly used to manufacture superheater tubes, reheater tubes, air guide tubes, main steam tubes, etc. for high-pressure and ultra-high-pressure boilers
Category:
General boiler tubes and high pressure boiler tube boiler tubes is exposed to high temperature performance. Boiler tubes in general, or high-pressure boiler tubes according to their use can be divided into a variety of steel pipe.
Model NO.: the whole line
Warranty: One Year
Material: SUS304
Installation: Free
Delivery Time: 40days After Payment
Capacity: Determined by The Customer
Trademark: Veshine
Transport Package: Wooden Case
Specification: 2750*1750*1900mm
Origin: Zhangjiagang, Suzhou, China
HS Code: 8422301090
Pet bottle blow moulding machine:Â