Cantilever Single Twisting Machine Suitable for Bobbin 1000mm

1000mm cantilever wire stranding machine for the assembly of multi-strand cored wire

 

1) Application:

 

Cantilever wire stranding machine is used to twist multi-core wires such as high-frequency wire, data wire, computer wire and power lines etc.

 

2).Equipment composition:

 a. Φ400-630mm* 26-head tension gun payoff ---------------------------------------------------------------------- 1 Set

b. Central taping machine + longitudinal aluminum foil stand + wire assembly stand three in one ----1 Set

c. Electrical control cabinet------------------------------------------------------------------------------------------------1 Set

d. Mainframe------------------------------------------------------------------------------------------------------------------1 Set

 

3).Equipment specification:

1. Φ400-630mm* 26-head assembly payoff:

2.Type: bilateral single layer, shaft type passive payoff

3. Pay-off way: adopting combination guide pulley payoff

4. adopting spring tension gun + brake belt adjusting tension

5. Way of locking bobbin: adopting cone-jacking + cone-jacking screwed locking bobbin

6. Bobbin transmission way: adopting bearing transmission

7. Caster: adopting 3" brake movable caster

8. Applicable bobbin size: Φ400-630mm bobbin (detailed size shall be provided by customer)

9. Equipped with tension and wire break sensing device

 

4). Central taping machine:

1. Type: single-head separable center taping

2. Driven power: 2HP AC brake motor (Siemens) + inverter (Yaskawa)

3. Taping direction: "S"or"Z" stranding direction that can be converted arbitrarily via internal adjustment switch

4. Tape rotary plate: plate diameter: Φ450mm, width: 15mm~30mm; hole diameter: 50mm

5. Applicable material: cotton paper, Mylar tape, aluminum foil

6. Taping distance: adopting motor adjustment (only adjust when the machine is running at a slow speed)

7. Tension adjustment: adjusted outside of the machine, it can be adjusted arbitrarily when running, the tension can be also adjusted separately

8. Taping speed: Max.2000RPM, interlock with single twisting machine

9. Tape-coiling guide rod: Φ16mm hole *460mm length

 

5).Longitudinal Aluminum foil stand:

1. Applicable aluminum foil plate diameterΦ480mm, aluminum foil width: 10mm-35mm, aluminum foil hole diameter: 2"~3"

2. Tension adjustment: adopting belt wheel + flat belt

 

6). Cantilever single twisting machine:

1. Application: multi-wire assembly and continuous taping of PVC, PE wires, power wires including filling, control cable, communication cable and coaxial cables etc.

2. Applicable single wire diameter: Φ1.0~8.0mm, stranded diameter: Max.Φ25mm

3. Pitch scope: 30~300mm [electronic gear pitch], traversed distance scope: 3~20mm [PLC data setting], pitch control: differential + AC motor + inverter + decoder + PLC (pitch error within ±0.2mm under steady speed state ), pitch adjustment: input setting value on the touch screen directly, automatic tracking the pitch after the pitch is set.

4. Main shaft rotary speed: Max. 750RPM, normal speed 600RPM/min.

5. Coiling iron bobbin size: Φ1000mm (stamping iron bobbin)

6. Wire-distribution eyelet plate layout is 1+6+12+18 equitable distribution, eyelet material: ceramics

7. Bobbin lifting way: adopting 1HP motor + oil-pressure system + button to control lifting bobbin

8.Way of loading/unloading bobbin: adopting oblique plate+ turning plate with 180 degree positioning, push bobbin manually

9. Power:

-  Mainframe power: 25HP*4P AC motor (Siemens) + inverter (YASKAWA)

-  Coiling power: 5HP*6P brake motor (Siemens) + inverter (YASKAWA)

10. FWD and REV stranding direction: realizing "S" or "Z" stranding direction by adjusting the switch inside the control cabinet for changing the rotary direction of motor.

11. Traversing method: bearing type, adopting imported rolled ball screw + precise slideway to proceed with traversing, traversed distance power: 1/2HP AC gear motor + inverter; traversed distance control: AC motor + inverter + decoder + PLC (traversed distance error within ±0.05mm under steady speed state)

12. Safety measurements: machine can't start in case of any failure display such as door un-closed well, bobbin loosing, supporting plate positioning etc.

13. Automatically shutdown in case of wire break and bobbin being full

14. Wire-crossing guide pulley groove diameter: Φ150mm (surface shall be coated with ceramics)

15. Bearings: SKF

16. Meter-counting precision: 0.8%

 

7) Brands for the main parts of the equipment:

1. Inverter brands: YASKAWA

2. Motor brands: SIEMENS

3. PLC brand: MITSUBISHI

4. Other electrical components adopt SCHNEIDER brand

5. Bearing brand: SKF

6. Decoder adopts LIKE high-definition product

 

8) Currently we the following models for the cantilever wire stranding machine:

 

 

1000mm cantilever wire stranding machine for the assembly of multi-strand cored wire

 

1) Application:

 

Cantilever wire stranding machine is used to twist multi-core wires such as high-frequency wire, data wire, computer wire and power lines etc.

 

2).Equipment composition:

 a. Φ400-630mm* 26-head tension gun payoff ---------------------------------------------------------------------- 1 Set

b. Central taping machine + longitudinal aluminum foil stand + wire assembly stand three in one ----1 Set

c. Electrical control cabinet------------------------------------------------------------------------------------------------1 Set

d. Mainframe------------------------------------------------------------------------------------------------------------------1 Set

 

3).Equipment specification:

1. Φ400-630mm* 26-head assembly payoff:

2.Type: bilateral single layer, shaft type passive payoff

3. Pay-off way: adopting combination guide pulley payoff

4. adopting spring tension gun + brake belt adjusting tension

5. Way of locking bobbin: adopting cone-jacking + cone-jacking screwed locking bobbin

6. Bobbin transmission way: adopting bearing transmission

7. Caster: adopting 3" brake movable caster

8. Applicable bobbin size: Φ400-630mm bobbin (detailed size shall be provided by customer)

9. Equipped with tension and wire break sensing device

 

4). Central taping machine:

1. Type: single-head separable center taping

2. Driven power: 2HP AC brake motor (Siemens) + inverter (Yaskawa)

3. Taping direction: "S"or"Z" stranding direction that can be converted arbitrarily via internal adjustment switch

4. Tape rotary plate: plate diameter: Φ450mm, width: 15mm~30mm; hole diameter: 50mm

5. Applicable material: cotton paper, Mylar tape, aluminum foil

6. Taping distance: adopting motor adjustment (only adjust when the machine is running at a slow speed)

7. Tension adjustment: adjusted outside of the machine, it can be adjusted arbitrarily when running, the tension can be also adjusted separately

8. Taping speed: Max.2000RPM, interlock with single twisting machine

9. Tape-coiling guide rod: Φ16mm hole *460mm length

 

5).Longitudinal Aluminum foil stand:

1. Applicable aluminum foil plate diameterΦ480mm, aluminum foil width: 10mm-35mm, aluminum foil hole diameter: 2"~3"

2. Tension adjustment: adopting belt wheel + flat belt

 

6). Cantilever single twisting machine:

1. Application: multi-wire assembly and continuous taping of PVC, PE wires, power wires including filling, control cable, communication cable and coaxial cables etc.

2. Applicable single wire diameter: Φ1.0~8.0mm, stranded diameter: Max.Φ25mm

3. Pitch scope: 30~300mm [electronic gear pitch], traversed distance scope: 3~20mm [PLC data setting], pitch control: differential + AC motor + inverter + decoder + PLC (pitch error within ±0.2mm under steady speed state ), pitch adjustment: input setting value on the touch screen directly, automatic tracking the pitch after the pitch is set.

4. Main shaft rotary speed: Max. 750RPM, normal speed 600RPM/min.

5. Coiling iron bobbin size: Φ1000mm (stamping iron bobbin)

6. Wire-distribution eyelet plate layout is 1+6+12+18 equitable distribution, eyelet material: ceramics

7. Bobbin lifting way: adopting 1HP motor + oil-pressure system + button to control lifting bobbin

8.Way of loading/unloading bobbin: adopting oblique plate+ turning plate with 180 degree positioning, push bobbin manually

9. Power:

-  Mainframe power: 25HP*4P AC motor (Siemens) + inverter (YASKAWA)

-  Coiling power: 5HP*6P brake motor (Siemens) + inverter (YASKAWA)

10. FWD and REV stranding direction: realizing "S" or "Z" stranding direction by adjusting the switch inside the control cabinet for changing the rotary direction of motor.

11. Traversing method: bearing type, adopting imported rolled ball screw + precise slideway to proceed with traversing, traversed distance power: 1/2HP AC gear motor + inverter; traversed distance control: AC motor + inverter + decoder + PLC (traversed distance error within ±0.05mm under steady speed state)

12. Safety measurements: machine can't start in case of any failure display such as door un-closed well, bobbin loosing, supporting plate positioning etc.

13. Automatically shutdown in case of wire break and bobbin being full

14. Wire-crossing guide pulley groove diameter: Φ150mm (surface shall be coated with ceramics)

15. Bearings: SKF

16. Meter-counting precision: 0.8%

 

7) Brands for the main parts of the equipment:

1. Inverter brands: YASKAWA

2. Motor brands: SIEMENS

3. PLC brand: MITSUBISHI

4. Other electrical components adopt SCHNEIDER brand

5. Bearing brand: SKF

6. Decoder adopts LIKE high-definition product

 

8) Currently we the following models for the cantilever wire stranding machine:

 

 

PS Foam Sheet Extrusion Line

Ps Foam Sheet Extrusion Line,Ps Foam Sheet Extrusion Machine,Ps Foam Sheet Extruder,Extruder Machine

haiyuanmachinery , https://www.hyfoambox.com