Pallet Truck including manual pallet truck,
Electric Pallet Truck, electric pallet stacker, electric Reach Truck .
Pallet truck manual from 2 ton, 3 Ton and 5
Ton, it mainly using in the warehouse, for lifting lighter products, the power
is by hydraulic lifting, driving by human manual.
Electric pallet truck is powered by
electric, it can reduce the human working, and the traveling is by electric
power, it can working in the warehouse. The capacity including 1 ton, 1.5 ton,
1.8 ton, 2 ton.
Electric Stacker capacity including 1 ton,
1.5 ton, 1.2 ton, the lifting height from 1.6 meter to 10 meters.
Electric reach truck have 1.5 ton, 2 ton.
Shantui products including Diesel Forklift , Electric Forklift, heavy duty
forklift, Gasoline Forklift, container forklift, Side Loader , pallet truck,
Construction Machinery including shantui bulldozer, Wheel Loader , crawler
excavator, road roller, generator set, motor grader, truck crane, construction
machinery parts, Shantui Parts , Cummins engine parts, komatsu parts, and other
machinery parts.
Pallet Truck Pallet Truck,Manual Hand Stacker,Manual Pallet Stacker,Manual Forklift Stacker SHANDONG VOLIN HEAVY MACHINERY CO.,LTD. , https://www.shantuimachinery.com
Table chemical composition of mine tailings (%)
According to domestic data and determination of tailings performance, tailings can be used for refractory clay, construction, cement ingredients, ceramic tiles, etc. For example, Shanxi tailings contain Al 2 O 3 57.48%, Fe 2 O 3 1.61%, CaO 0.13%, and the refractoriness is greater than 1799 ° C, which is in line with the high alumina bauxite refractory standard. Guangxi Pingguo bauxite tailings have high iron content and can also be used as building bricks. After molding, they can reach 150kg/cm 2 and the strength is more than double that of ordinary bricks.
After dressing bauxite, tailings output part, with its composition and yield of ore beneficiation methods and ingredients vary. Generally, when the ore contains Al 2 O 3 in the range of 50% to 60%, after tailing, the tailings production is about 35% to 38%; the main components in the tailings are A l2 O 3 and SiO 2 , a small amount. There are oxides of calcium, magnesium , iron and titanium . The tailings composition of ore after mineral processing in some key mines in China is shown in Table 1. Seen from the table, the tailings component meet the requirements of the raw material bauxite metallurgical YB2212-73 standards issued by the Ministry of two products (B) a.
element
mine
Al 2 O 3
SiO 2
Fe 2 O 3
CaO
MgO
Ti
K 2 O
Na 2 O
Caustic alkali
Xiaoyi
Yangquan
Small off
57.48
58.87
50.50
23.79
21.59
25.25
1.61
1.17
3.50
0.13
0.14
0.65
0.34
0.10
0.31
2.87
3.09
3.05
0.14
0.18
1.35
0.10
0.08
0.56
13.99
14.05
13.05