A chamber type flame furnace. The heat transfer in the furnace is not only by the reflection of the flame, but more importantly by the radiation heat transfer of the furnace roof, the furnace wall and the hot gas. In terms of heat transfer mode, many furnace types (such as heating furnaces, open hearth furnaces, etc.) can be classified into the reverberatory furnace. Generally it refers to non-ferrous metal smelting furnace with reflection. The reverberatory furnace is widely used in the smelting of non-ferrous metals and is used in processes such as drying, roasting, refining, melting, heat preservation and slag treatment. Reverberatory furnace has been a major copper refining equipment. A chamber type flame furnace. The heat transfer in the furnace is not only by the reflection of the flame, but more importantly by the radiation heat transfer of the furnace roof, the furnace wall and the hot gas. In terms of heat transfer mode, many furnace types (such as heating furnaces, open hearth furnaces, etc.) can be classified into the reverberatory furnace. Generally refers to the reverberatory furnace for smelting non-ferrous metals. The reverberatory furnace is widely used in the smelting of non-ferrous metals and is used in processes such as drying, roasting, refining, melting, heat preservation and slag treatment. The reverberatory furnace has always been the main equipment for copper smelting. High quality copper reverberatory furnace refractory masonry, have arched roof and hanging in two ways: Multi-brick arch roof; hanging roof and side walls are lined with brick, magnesium, magnesia-chrome brick, magnesium aluminum or chromium magnesite brick tiles. Iron sand bottom magnesium (magnesium oxide and iron oxide) sintering. The smelting reverberatory furnace is suitable for processing well-mixed finely divided materials, and it is not suitable for processing large pieces of materials. It has strong adaptability to raw materials and fuels, is easy to achieve large-scale, and has low cost; however, it has high fuel consumption, large amount of flue gas, low concentration of sulfur dioxide in flue gas, is difficult to recycle, and pollutes the environment. Therefore, it limits the copper-making reverberatory furnace. development of. By using an oxygen-enriched blast and reducing air leakage, or by using an oxygen injection device to spray the concentrate into the furnace, the production capacity of the reverberating furnace and the concentration of the flue gas (SO2) can be increased, and the SO2 can be utilized. Drum cleaners are suitable for pre-cleaner of initial stage of material feeding procedure in many processing industry. Its main function is separating large impurities from raw materials. Pre Cleaner,Drum Pre Cleaner,Good Cleaning Equipment,High Output Powder Cleaner XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.hxfeedmill.com
It has high efficiency in pre-cleaning or cleaning paddy, corn, soybean, wheat, sorghum and other types of grains.
It is mainly used to remove the large impurities. When the materials fall into the rotating drum, the materials that smaller than the sieve mesh will fall into the outer cylinder, and large impurities will rotate with drum and gradually expel from the outlet.