When the electric detonator is used for detonation, the connection method has three types: series connection, parallel connection and hybrid. The value of the connected line has a great influence on the electrical blasting effect. The connection between the foot line and the wire should meet the blasting requirements. The connection method is shown in Figure 1.
Figure 1 foot line, wire connection method
(α) wires are connected to each other; (b) wires are connected to the electric detonator foot line; (c) right angle connection method


Mould Temperature Controller/Mold Temperature Controller


RTC series automatic Mould Temperature Controller is mainly used for mould heating and keeping constant temperature, as well
as for the fields with same requirement. This series adopts heat-exchanging principle, using water or high- heat-conduction oil as media to keep the mould at a constant temperature during molding, which guarantee top quality for molding. The optimized design ensures the heating temperature up to 200 degree centigrade. The characteristics of machine:
(1)Computer control, direct-view, easy and simple for operation, PID temperature control with high accuracy and stable temperature controlling. The accuracy is within 1 degree centigrade .
(2)Use horizontal pump, running in smooth and steady way, stable flow with long life
(3)Cylindrical tube design, pressurization and explosion-proof.
(4)Automatic alarming function, alarm and stop automatically when the system has a breakdown
(5)Attractive appearance, easily-dismount design, convenient for maintenance
(6)Water and oil cooling type for customers' selection



Mould Temperature Controller

Introduction:
RTC-W series (water type) and RTC series (oil type) Mould Temperature Controller are used to heat up the mould and maintain temperature, meanwhile they can be used in other similar applications.
For RTC-W series (water type), high temperature water from the mould is returned to the cooling tank and cooled by direct cooling.
It is then pressurized by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature.
For RTC series (oil type), high temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurized by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimized design, It can reach a maximum of 200°C.


Features:
P.I.D. multi-stage temperature control system can maintain a mould temperature with accuracy of 0.5°C.

Adopts high efficiency high temperature pump, which can meet the demands of temperature control for precise moulds and mould loop with minor diameter to achieve precise temperature control and high efficient heat exchange.

Multiple safety devices including power reverse phase protection, pump overload protection, overheat protection and low level protection that can automatically detect abnormal performance and indicate this via visible alarm.

For RTC-W series (water type), the heating temperature can reach 120°C.
For RTC series (oil type), the heating temperature can reach 200°C.

Pipe heaters are made of stainless steel.


Water manifolds, Teflon hose and Transfer oil are optional.

Equipped with high pressure protection, safety pressure relieving, automatic water supplying and air exhausting.


Mould temperature controller schematic structure:


Water Type Mold Temperature Controller

Mold Temperature Controlling Machine,Mold Temperature Controller,Temperature Controller

Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , https://www.rhongmachinery.com