Needle bar is an important component of a Warp Knitting Machine. It is a long, thin metal bar that holds the needles used to form the knitted fabric. The needle bar is mounted on the machine and moves up and down, allowing the needles to pass through the yarn and create the stitches.
The needle bar is a critical component of the warp knitting machine, and must be carefully maintained to ensure that the needles are properly aligned and functioning correctly. Regular cleaning and lubrication are essential to prevent wear and tear on the needles and the bar itself.
Needle Bar,Stretcher Bars For Punch Needle,Needle Bar Connecting Link,Needle Bar Thread Guide Brother suzhou cotex international Co.,Ltd , https://www.macanol.com
Tony Potter, president of CMAI's Europe, Middle East and Africa olefins division, analyzed that the next wave of capacity utilization in the olefins business will start to decline from the second half of 2008 and the downward trend will continue into 2011. However, 2007 is still expected to be a good year because only a few ethylene units have been put into operation. They are the cracking units of Formosa Petrochemical Company in Taiwan, China, and the cracking devices of Iranian Arya Sasol and Jam Petrochemical Company. Therefore, 2007 will still be a tight year for olefin production capacity.
Further developments in the Middle East may require more reliance on heavier feedstocks such as propane, naphtha or gas oils, which will reduce ethane production. This will increase the cost of the project and will require effective recycling of by-products. Although gas prices in the Gulf region are expected to rise, reflecting demand and export growth, their prices are still highly competitive compared to other regions.
According to CMAI, the proportion of Middle East basic chemicals and plastics production capacity will increase from 3% in 1990 to 15% in 2015. Until 2009, exports from Middle Eastern countries will still be easily absorbed by Asia. The analysis believes that there will be an oversupply in the market after this. Fran Keeth, executive vice president of Shell Chemicals, believes that by 2015, the Middle East will account for 20% of global ethylene capacity.
Michael J. Dolan, president of ExxonMobil Chemical, pointed out that the global petrochemical industry is undergoing major regional transfers. North America will change from a net exporter of petrochemicals to a net importer by 2007. By 2015, GCC will supply more than 20% of global demand. ExxonMobil expects that in the next 10 years, about 55% of the world's petrochemical industry will grow in Asia, and more than 1/3 will be in China. By 2015, Asia will account for 45% of the world's major general product demand.
The needle bar typically has a series of holes drilled into it, with each hole holding a single needle. The needles are usually made of steel and have a hooked end that catches the yarn and pulls it through the fabric. The number of needles on the bar can vary depending on the machine and the type of fabric being produced.
In warp knitting machines, the needle bar is typically located above the warp yarns, which are held under tension by a series of guides and rollers. As the needle bar moves up and down, the needles pass through the warp yarns, creating loops that are held in place by the tension of the yarns.
Mohamed H. Al-Mady, chief executive of Saudi Basic Industries Corporation and chief executive of GPCA, announced at the first GPCA meeting in Dubai recently that the GCC countries Bahrain, Kuwait, The huge construction capacity of the petrochemical industry in Oman, Qatar, Saudi Arabia and the UAE will bring challenges to the world's petrochemical production in the short-term market environment. Since the founding of the Gulf Cooperation Council, members have increased from 8 companies to 60 companies.