Metal floater flowmeters are mechanical flowmeters. When measuring gases and liquids, it is necessary to know the instantaneous flow, working pressure, temperature, and medium density and other parameters of the actual working conditions on the site before manufacturing to ensure the accuracy of the measurement. The selection conversion method is as follows: When a metal floater flowmeter is used to measure the liquid flow rate, the manufacturer uses clean water at room temperature as the calibration fluid gauge graduation. If the density of the measured fluid is different from that of water, the reading of the flow indication should be converted. The conversion formula is as follows:      When a metal float meter is used for gas flow, the manufacturer indexes the dry air in the standard state (20°C, 101.325kPa) as a gas scale. When the operating state of a predetermined gas to be measured and the manufacturer is not the same, respond to the flow meter readings shown for conversion value, the conversion formula is as follows: Since the user's operation state varies, so please indicate the name of the measured medium, and the flow path, please specify another medium pressure, temperature, density and viscosity, so that we can help the user selection is correct. It is also possible to convert the gas under working conditions or working conditions into a standard flow gauge according to user requirements. The general measured flow rate can be selected from the common type (1Cr18Ni9Ti); it can be corrosion resistant (lined with fluoroplastic) when corrosive fluids are used. If there is something unknown, we can provide technical advice . Dochin Instrument (Shanghai) Co., Ltd. After-sales and warranty All products supplied by Duo Qin Instrument (Shanghai) Co., Ltd.: All products are warranted for 2 years; Provide free telephone consultation, guide installation and commissioning services; Negotiate door-to-door installation, commissioning and other issues, and only charge reasonable travel expenses; Large amount can be free to guide the installation, commissioning; Dochin Instrument (Shanghai) Co., Ltd. Main products: electromagnetic flowmeter, vortex flowmeter, turbine flowmeter, ultrasonic flowmeter, V- cone flowmeter, metal rotor flowmeter, oval gear flowmeter, ultrasonic cold heat meter and (Explosion-proof type) quantitative control system and other products, your needs and satisfaction is always our pursuit, welcome to call the communication consulting.
P84 has the unique gap of ordinary felt filter cloth, good air permeability, high efficiency dust collecting and long service life. Its temperature resistance grade is moderate, instantly up to 150 degrees , acid and alkali resistance is moderate, and has very good wear resistance.
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
P84 P84 Filter Bag,P84 Needle Felt Filter Bags,P84 Polyester Bag Air Filter Bag,P84 Needle Punched Air Filter Bag Hebei Wangjing Environmental Protection Co., Ltd. , https://www.wjdustcollector.com
  
Service tenet: No matter how long the product is used, as long as you find us, we will solve all problems for you until you are satisfied. We believe that our experience in the flow meter industry for more than 10 years can bring you satisfactory service.