Eco-friendly Waste Disposal Solutions,Biodegradable Plastic Alternatives,Home Composting Compatible Bags Henan Kepeiao New Materials Co.,Ltd. , https://www.kopeochem.com
SMC triple parts are air filters, pressure reducing valves, and oil mist filters. They can also be combined with an air filter and a pressure reducing valve to become a pressure reducing valve for filtration (features combined with air filters and pressure reducing valves. Use the same). In some cases where the presence of oil mist in the compressed air cannot be allowed, an oil mist separator is required to filter out the oil mist in the compressed air. In short, these components can be selected as needed, and they can be combined and used.
SMC triple use instructions:
1. The filter drainage has two methods, pressure differential drainage and manual drainage. When draining manually, it must be discharged before the water level reaches the level below the filter element.
2. When adjusting the pressure, please pull up and rotate before turning the knob. Press the rotary knob to position. Turn the knob to the right to increase the outlet pressure and turn left to decrease the outlet pressure. When adjusting the pressure, it should be gradually and evenly adjusted to the required pressure, and it should not be adjusted in one step.
3. How to use the oil feeder: Use JIS K2213 oil (ISO Vg32 or equivalent oil) for the oil feeder. Please do not add more than eight full cups. The number 0 is the minimum amount of oil and 9 is the maximum amount of oil. Since the 9-0 position cannot rotate, it must rotate clockwise.
SMC Trim Installation Notes:
1. Some parts are made of PC (polycarbonate) and are not allowed to be used near or in an organic solvent environment. Please use neutral detergent for PC cup cleaning.
2, the use of pressure should not exceed its scope of use.
3. When the air volume at the outlet is significantly reduced, the filter element should be replaced in time.